Документ взят из кэша поисковой машины. Адрес оригинального документа : http://hea-www.harvard.edu/RD/xpa/INSTALL Дата изменения: Wed Feb 9 15:33:31 2000 Дата индексирования: Mon Oct 1 22:47:06 2012 Кодировка: Поисковые слова: annular solar eclipse

Basic Installation
==================

NB: These are generic installation instructions, modified for XPA.

The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.

Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.

1. `cd' to the directory containing the package's source code and type
"./configure". This runs a configuration script created by GNU
autoconf, which configures XPA for your system and creates a
Makefile. The configure script allows you to customize the XPA
configuration for your site; for details on how you can do this,
type "./configure -help" or refer to the autoconf documentation (not
included here). XPA's "configure" script supports the following
special switches in addition to the standard ones:

--enable-gcc If this switch is set, XPA will configure
itself to use gcc if it is available on your
system. Note: it is not safe to modify the
Makefile to use gcc after configure is run.

--with-tcl=DIR Specifies the directory containing the Tcl
binaries and Tcl's platform-dependent
configuration information. By default
the Tcl directory is assumed to be in the
location given by (a) above.

Other standard options are listed below. the most important of which
are --exec-prefix and --prefix (to specify where to install), and
--x-includes=DIR and --x-libraries=DIR (for non-standard X installations).
Note: be sure to use only absolute path names (those starting with "/")
in the --prefix and --exec_prefix options. (The configure options we
use at SAO for various machines are given as examples in the script
file called "saoconfig" in this directory.)

2. Type `make' to compile the package.
This will create a library archive called "libxpa.a" and, if --with-tcl
was specified, a shared object called "libtclxpa.so". It also will
create the programs xpaget, xpaset, xpainfo, xpaaccess, xpans, and
xpamb.

########## no self-tests are implemented in xpa ###############################
3. Optionally, type `make check' to run any self-tests that come with
the package. However, our development test programs, stest (server test)
and ctest (client test) can be generated by executing `make testall'.
Then run:

stest

in one window and try:

ctest -s -l 100 "xpa1*" "test of xpa client set"
or
ctest -g -l 100 "xpa1*" "test of xpa client get"

in another to see it all work.
###############################################################################

4. Type "make install" to install XPA's libraries and binaries in
standard places. You'll need write permission on the installation
directories to do this. The installation directories are
determined by the "configure" script and may be specified with
the --prefix and --exec_prefix options to "configure". See the
Makefile for information on what directories were chosen; you
can override these choices by modifying the "prefix" and
"exec_prefix" variables in the Makefile.

5. There are .html help files in the doc directory. You can copy
these files to a more convenient location, if you like. We
did not automate this step because we did not know where to
copy these files by default. (NB: The help.html file is the
top level index file.)

6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.

Compilers and Options
=====================

Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

Compiling For Multiple Architectures
====================================

You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.

Installation Names
==================

By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/lib', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.

You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.

In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.

Sharing Defaults
================

If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Operation Controls
==================

`configure' recognizes the following options to control how it
operates.

`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.

`--help'
Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).

`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.

`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.

`configure' also accepts some other, not widely useful, options.

If you have questions, please contact us at: saord@cfa.harvard.edu.

SAO/HEAD Software R&D Group