Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/6.5.0/doc/evproject/node6.html
Дата изменения: Tue Aug 16 04:19:26 2005
Дата индексирования: Sat Dec 22 10:03:13 2007
Кодировка:

XMM-Newton Science Analysis System


evproject (attcalc2-1.0) [xmmsas_20050815_1803-6.5.0]

Meta Index / Home Page / Description

Source of the spacecraft attitude information

There are three allowed sources of this information, governed by the parameter attsource:

1. attsource=`binned': the binned attitude output of attbin is read from the file inbinnedattset.

2. attsource=`odf': the attitude information stored in the ODF is used. (Note that the user must set the environment variable SAS_ODF to point to this ODF before running evproject in this mode.) If parameter odfattsource is set to `ahf', the Attititude History File of the ODF is the source of the attitude values; if it is set to `om', the values are read from the OM tracking history file.

   The task bins up these attitude values, as described in section 3.5; the binned-up attitude values may be exported to a file via parameters writebinnedatt and outbinnedattset. Tasks eootemap, epnoisemap, eimchip2sky and eexpchipmap are designed to be able to read this binned-attitude dataset, so that they can use the same binning scheme as evproject.

3. attsource=`fixed': the attitude is taken from user-supplied values via parameters attra, attdec and attapos.

Note that the source chosen for attitude data affects the calculation of the PNT keywords (see next section).