Curiosity has seen evidence of water-bearing minerals in rocks near where it had already found clay minerals inside a drilled rock.
Last week, the roverò??s science team announced that analysis of powder from a drilled mudstone rock on Mars indicates past environmental conditions that were favorable for microbial life. Additional findings presented March 18 at a news briefing at the Lunar and Planetary Science Conference in The Woodlands, Texas, suggest those conditions extended beyond the site of the drilling.
Using infrared-imaging capability of a camera on the rover and an instrument that shoots neutrons into the ground to probe for hydrogen, researchers have found more hydration of minerals near the clay-bearing rock than at locations Curiosity visited earlier.
The roverò??s Mast Camera (Mastcam) also can serve as a mineral-detecting and hydration-detecting tool, reported Jim Bell of Arizona State University in Tempe. ò??Some iron-bearing rocks and minerals can be detected and mapped using the Mastcamò??s near-infrared filters.ò??
Ratios of brightness in different Mastcam near-infrared wavelengths can indicate the presence of some hydrated minerals. The technique was used to check rocks in the ò??Yellowknife Bayò?? area where Curiosityò??s drill last month collected the first powder from the interior of a rock on Mars. Some rocks in Yellowknife Bay are crisscrossed with bright veins.
ò??With Mastcam, we see elevated hydration signals in the narrow veins that cut many of the rocks in this area,ò?? said Melissa Rice of the California Institute of Technology in Pasadena. ò??These bright veins contain hydrated minerals that are different from the clay minerals in the surrounding rock matrix.ò??
The Russian-made Dynamic Albedo of Neutrons (DAN) instrument on Curiosity detects hydrogen beneath the rover. At the roverò??s very dry study area on Mars, the detected hydrogen is mainly in water molecules bound into minerals. ò??We definitely see signal variation along the traverse from the landing point to Yellowknife Bay,ò?? said Maxim Litvak of the Space Research Institute in Moscow. ò??More water is detected at Yellowknife Bay than earlier on the route. Even within Yellowknife Bay, we see significant variation.ò??
Findings presented March 18 from the Canadian-made Alpha Particle X-ray Spectrometer (APXS) on Curiosityò??s arm indicate that the wet environmental processes that produced clay at Yellowknife Bay did so without much change in the overall mix of chemical elements present. The elemental composition of the outcrop Curiosity drilled into matches the composition of basalt. For example, it has basalt-like proportions of silicon, aluminum, magnesium, and iron. Basalt is the most common rock type on Mars. It is igneous, but it is also thought to be the parent material for sedimentary rocks Curiosity has examined.
ò??The elemental composition of rocks in Yellowknife Bay wasnò??t changed much by mineral alteration,ò?? said Mariek Schmidt of Brock University in Saint Catharines, Ontario, Canada.
A dust coating on rocks had made the composition detected by APXS not quite a match for basalt until Curiosity used a brush to sweep the dust away. After that, APXS saw less sulfur.
ò??By removing the dust, weò??ve got a better reading that pushes the classification toward basaltic composition,ò?? Schmidt said. The sedimentary rocks at Yellowknife Bay likely formed when original basaltic rocks were broken into fragments, transported, re-deposited as sedimentary particles, and mineralogically altered by exposure to water.
NASA/JPL-Caltech/MSSS/ASU
Hydration map, based on Mastcam spectra, for "Knorr" rock target
On this image of the rock target "Knorr," color coding maps the amount of mineral hydration indicated by a ratio of near-infrared reflectance intensities measured by the Mast Camera (Mastcam) on NASA's Mars rover Curiosity.
Rock target "Knorr" near Curiosity in rover's self-portrait
The location of a
rock target called "Knorr" is indicated on this self-portrait of the
Curiosity rover in the "Yellowknife Bay" area.
Target "Wernecke" after brushing by Curiosity
The gray area in the center of this image is where the Dust Removal Tool on the robotic arm of NASA's Mars rover Curiosity brushed a rock target called "Wernecke."
NASA/JPL-Caltech/University of Guelph
Elemental compositions of "Yellowknife Bay" rocks
Researchers have used the Alpha Particle X-ray Spectrometer (APXS) instrument on the robotic arm of NASA's Mars rover Curiosity.
Veins and nodules at "Knorr" target in "Yellowknife Bay" of Gale Crater
Light-toned nodules and veins are visible in this image from NASA's Mars rover Curiosity of a patch of sedimentary rock called "Knorr."
NASA/JPL-Caltech/MSSS/ASU
Indication of hydration in veins and nodules of "Knorr" in "Yellowknife Bay"
At different locations on the surface of the same rock, scientists can use the Mast Camera (Mastcam) on NASA's Mars rover Curiosity to measure the amount of reflected light at a series of different wavelengths.
NASA/JPL-Caltech/MSSS/ASU
Rock "Tintina" exposes "Yellowknife Bay" vein material
This raw image of "Tintina," a broken rock fragment in a rover wheel track, was taken by Curiosity's Mast Camera (Mastcam).
NASA/JPL-Caltech/MSSS/ASU
Hydration map, based on Mastcam spectra, for broken rock "Tintina"
On this image of the broken rock called "Tintina," color coding maps the amount of mineral hydration indicated by a ratio of near-infrared reflectance intensities measured by the Mast Camera (Mastcam) on NASA's Mars rover Curiosity.
Close-up view of broken Mars rock "Tintina"
This close-up view of "Tintina" was taken by the rover's Mars Hand Lens Imager (MAHLI) on Sol 160 (January 17, 2013) and shows interesting linear textures in the bright white material on the rock. Image credit:
NASA/JPL-Caltech/MSSS/ASU
Mast Camera and its calibration target on Curiosity rover
This set of images illustrates the twin cameras of the Mast Camera (Mastcam) instrument on NASA's Curiosity Mars rover (upper left), the Mastcam calibration target (lower center), and the locations of the cameras and target on the rover.
NASA/JPL-Caltech/MSSS/ASU
Filters for color imaging and for science
The color cameras on NASA's Mars rover Curiosity, including the pair that make up the rover's Mast Camera (Mastcam) instrument, use the same type of Bayer pattern RGB filter as found in typical commercial color cameras.
"Raw," "natural," and "white-balanced" views of martian terrain
These three versions of the same image taken by the Mast Camera (Mastcam) on NASA's Mars rover Curiosity illustrate different choices that scientists can make in presenting the colors recorded by the camera.
NASA/JPL-Caltech/MSSS/ASU
Using Curiosity's Mast Camera to view scene in "natural" color
This image of terrain inside Mars' Gale Crater and the inset of the calibration target for the Mast Camera (Mastcam) on NASA's Mars rover Curiosity illustrate how the calibration target aids researchers in adjusting images to estimate "natural" color, or approximately what the colors would look like if we were to view the scene ourselves on Mars, using the known colors of materials on the target.
Using false color from Curiosity's Mast Camera
This image of terrain inside Mars' Gale Crater and the inset of the calibration target for the Mast Camera (Mastcam) on NASA's Mars rover Curiosity illustrate how false color can be used to make differences more evident in the materials in the scene.
Bluish-black rock with white "crystals" on Mars
The Mast Camera (Mastcam) on NASA's Mars rover Curiosity showed researchers interesting color and patterns in this unnamed rock imaged during the 27th martian day, or sol, of the rover's work on Mars (September 2, 2012).