Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/computing/software/gipsy/tsk/ipaccal.dc1 Дата изменения: Wed Apr 20 12:54:53 1994 Дата индексирования: Fri Jan 16 18:16:04 2009 Кодировка: Поисковые слова: http astrokuban.info astrokuban

Program: IPACCAL

Purpose: Program to calibrate IRAS data sets.

Category: IRAS

File: ipaccal.src

Author: D.R.Boxhoorn

Keywords:

IRSETIN= Give set to be calibrated.

** CIPFIL= Directory with PRHF values [standard]

** CISFIL= Directory with SRHF values [standard]

** GAIN= Gain setting [standard]
Choices are: Standard, High, Low

** VFET= File with vfet constants for standard gain [standard]

** LOVFET= File with vfet constants for low gain [standard]

** HIVFET= File with vfet constants for high gain [standard]

** TYPE2= File with type2 constants [standard]

** BBT= File with bias boost times [standard]

** UTCSFL= File with UTCS references [standard]

UNITS= The units of the output IRDS [MJy/sr]
Choices are: MJy/sr, W/m2, pW/m2

IRSETOUT= Give output set [IRSETIN]


Description: The data from IRSETIN are calibrated with constants from
various files peculiar to this IPAC calibration.
Only raw data (with units DN-02) can be calibrated.
The hidden GAIN keyword is used in case an AO that has been
measured with a non-standard (e.g. low or high) gain has to
be calibrated. You should know yourself when this has to be
done. In that case the standard GAIN setting should give
ridiculously low or high fluxes.

The noise estimate from PLATE is converted to the units
requested; the value of one digitization step is also
converted and written to the irds under keyword DIGNOISE

References:
Former routine name: cimain.


Example: 1) Inset and Outset are one and the same Set:
IRSETIN=peer
IRSETOUT=
UNITS=
*******************************************************
The inputset is peer
The outputset is peer
.
.
.
The set will be calibrated in units of MJY/SR
*******************************************************
IPACCAL +++ FINISHED +++


2) Inset and Outset are different and Units are W/m2
IRSETIN=geishab4
IRSETOUT=cal4geisha
UNITS=W
COPY Version 1.0 Jan 29, 1990
Set geishab4 has 4 axes
.
.
.
*******************************************************
The inputset is geishab4
The outputset is cal4geisha
.
.
.
The set will be calibrated in units of W/M2
*******************************************************
IPACCAL +++ FINISHED +++




Updates: Apr 13, 1992: DRB, Document created.
Oct 29, 1992: DK, conversion of noise nad digitization noise
Feb 8, 1994: DRB, "inverted scans" bug fixed
Apr 20, 1994: DK, inadvertent recursion in string operation
removed.