Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/pub/people/vlbi/v184/v184a/March06/sched.runlog Дата изменения: Thu Feb 23 09:39:49 2006 Дата индексирования: Mon Jun 28 00:24:07 2010 Кодировка: Поисковые слова: http www.badastronomy.com bad tv foxapollo.html

Welcome to program SCHED. Version: 6.02 July 2005

The manual is at http://www.aoc.nrao.edu/~cwalker/sched/sched/sched.html
Unix users should set $SCHED to the base area where SCHED is installed.
Most run time messages will be in sched.runlog

Some useful commands to give now if running interactively:
SCHedule= : Specify input file.
PLOT : Invokes uv, xy, rd, and uptime plotting.
FREQLIST=lowF,highF : Make frequency list (MHz). Then exit.
EXIT : Leave program.
/ : End of inputs - run program (or EXIT).

SRREAD: Reading source catalog: Program_input
SRREAD: Please convert source catalog from use of EPOCH to EQUINOX.
RDSET: Reading setup file: h2o22229d.set
TPINI: Reading tape initialization information from SCHED input file.
STREAD: Reading station catalog: /nfs/atapplic/vlbi/sched/catalogs/stations.dat
STREAD: Will read locations file /nfs/atapplic/vlbi/sched/catalogs/locations.dat
SCHIN: Found 46 input scans.
SRREAD: Reading source catalog: /nfs/atapplic/vlbi/sched/catalogs/sources.vlba
GETFREQ: Reading frequency file: /nfs/atapplic/vlbi/sched/catalogs/freq.dat
SCHOPT: First output scan will be number 1
SCHOPT: There will be 46 output scans ( 1 - 46) from 72/00:00:00 to 72/11:44:48
SUMOPE: Writing summary file v184a.sum
OMSOUT: Writing OMS file v184a.oms
VXWRT : Writing V E X file v184a.skd
VXWRIF: WARNING, Phase cal not under computer control for some stations.
Contact stations by e-mail to make sure phase cal is switched off
VXS2MD: S2 Modes with DAR = NONE wiring not implemented, using naive S2 mode
VXWRTR: WARNING, un-documented S2_data_source, may not be recognized by PCFS

Scan number: 9
Start time: 2006-072-02:06:20
Stop time: 2006-072-02:11:21
Source: 0420-014
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station ATCA
Stations need 40s for any mode change, incl frequency shift.

Scan number: 9
Start time: 2006-072-02:06:20
Stop time: 2006-072-02:11:21
Source: 0420-014
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station HOBART
Stations need 40s for any mode change, incl frequency shift.

Scan number: 9
Start time: 2006-072-02:06:20
Stop time: 2006-072-02:11:21
Source: 0420-014
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station CEDUNA
Stations need 40s for any mode change, incl frequency shift.

Scan number: 15
Start time: 2006-072-03:42:35
Stop time: 2006-072-03:47:36
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station ATCA
Stations need 40s for any mode change, incl frequency shift.

Scan number: 15
Start time: 2006-072-03:42:35
Stop time: 2006-072-03:47:36
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station HOBART
Stations need 40s for any mode change, incl frequency shift.

Scan number: 15
Start time: 2006-072-03:42:35
Stop time: 2006-072-03:47:36
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station CEDUNA
Stations need 40s for any mode change, incl frequency shift.

Scan number: 27
Start time: 2006-072-06:55:05
Stop time: 2006-072-07:00:06
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station ATCA
Stations need 40s for any mode change, incl frequency shift.

Scan number: 27
Start time: 2006-072-06:55:05
Stop time: 2006-072-07:00:06
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station HOBART
Stations need 40s for any mode change, incl frequency shift.

Scan number: 27
Start time: 2006-072-06:55:05
Stop time: 2006-072-07:00:06
Source: 3C84
Station codes: At,Ho,Cd
Setup file: h2o22229d.set
PRTSCN: Scan information was written to the log file.
VXSCHK: WARNING: Mode setup < 40s for station CEDUNA
Stations need 40s for any mode change, incl frequency shift.
VXSCH: Tsys calibration is taken during every gap in recording, but these appear over 15 min apart!
This can be improved by inserting 40 second gaps at regular intervals.
VXSCH: WARNING: Scan timing problem for PCFS, this VEX will NOT run!!!!
FLAGS: Writing apriori flagging file v184a.flag
Processing ATCA
Processing HOBART
Processing CEDUNA