Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/pub/people/vlbi/v190/v190d/sched.runlog Дата изменения: Mon Nov 6 02:35:02 2006 Дата индексирования: Thu Dec 27 16:02:25 2007 Кодировка:

Welcome to program SCHED. Version: 6.02 July 2005

The manual is at http://www.aoc.nrao.edu/~cwalker/sched/sched/sched.html
Unix users should set $SCHED to the base area where SCHED is installed.
Most run time messages will be in sched.runlog

Some useful commands to give now if running interactively:
SCHedule= : Specify input file.
PLOT : Invokes uv, xy, rd, and uptime plotting.
FREQLIST=lowF,highF : Make frequency list (MHz). Then exit.
EXIT : Leave program.
/ : End of inputs - run program (or EXIT).

SRREAD: Reading source catalog: Program_input
SRREAD: Please convert source catalog from use of EPOCH to EQUINOX.
TPINI: Reading tape initialization information from SCHED input file.
STREAD: Reading station catalog: /nfs/atapplic/vlbi/sched/catalogs/stations.dat
STREAD: Will read locations file /nfs/atapplic/vlbi/sched/catalogs/locations.dat
SCHIN: Found 442 input scans.
RDSET: Reading setup file: /nfs/atapplic/vlbi/sched/setups/lba18cm-1p-2IF.set
GETFREQ: Reading frequency file: /nfs/atapplic/vlbi/sched/catalogs/freq.dat
SHORTN: WARNING - Source names longer than 8 characters used.
Mark III correlators and geodetic software will have problems.
SCHOPT: First output scan will be number 1

TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at PARKES on day 322 at 16:58:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at ATCA on day 322 at 16:58:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at MOPRA on day 322 at 16:58:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at HOBART on day 322 at 16:58:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at TID70_S2 on day 322 at 16:58:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at PARKES on day 322 at 22:57:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at ATCA on day 322 at 22:57:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at MOPRA on day 322 at 22:57:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at HOBART on day 322 at 22:57:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at TID70_S2 on day 322 at 22:57:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at PARKES on day 323 at 04:54:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at ATCA on day 323 at 04:54:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at MOPRA on day 323 at 04:54:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at HOBART on day 323 at 04:54:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at TID70_S2 on day 323 at 04:54:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at PARKES on day 323 at 10:51:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at ATCA on day 323 at 10:51:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at MOPRA on day 323 at 10:51:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at HOBART on day 323 at 10:51:00 has only a 0.00 minute gap.


TPS2: *** WARNING *** 4.00 minutes needed to change tapes at S2 stations without
data loss while using all tapes.
Change at TID70_S2 on day 323 at 10:51:00 has only a 0.00 minute gap.

SCHOPT: There will be 442 output scans ( 1 - 442) from 322/11:00:00 to 323/11:00:00
SUMOPE: Writing summary file v190d.sum
OMSOUT: Writing OMS file v190d.oms
VXWRT : Writing V E X file v190d.skd
VXWRIF: WARNING, Phase cal not under computer control for some stations.
Contact stations by e-mail to make sure phase cal is switched off
VXS2MD: S2 Modes with DAR = NONE wiring not implemented, using naive S2 mode
VXWRTR: WARNING, un-documented S2_data_source, may not be recognized by PCFS
FLAGS: Writing apriori flagging file v190d.flag
Processing PARKES
Processing ATCA
Processing MOPRA
Processing HOBART
Processing TID70_S2