Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.atnf.csiro.au/research/pulsar/ppta/index.php?n=Observing.DFBSetup
Дата изменения: Unknown Дата индексирования: Tue Apr 12 21:15:03 2016 Кодировка: Поисковые слова: annular solar eclipse |
DFBSetup Setting up PDFB2It is likely that changes in the set-up requirements will occur frequently and so check first with the Parkes staff and update this wiki if necessary. Software setupSetting up the PDFB2
Running SPD monitoring software
Running tcs
Select "expert mode" and "PDFB2". Hardware setupThe PDFB2 can process up to 1GHz of bandwidth. Currently at Parkes we use the PDFB2 at 10cm with a bandwidth of ~1GHz and a bandwidth of 256 MHz at 20cm. It is currently necessary to change the wiring setup to change between these systems (ADD INFO ABOUT THIS HERE) (DESCRIBE SELECTING RECEIVERS ETC.) |