Sheet forming is equipped with:

• High-performance 8-position automatic presses with force of 320 and 1000 tf, deep drawing of parts (diameter up to 200 mm) from a roll of tape up to 400 mm wide, sheets and strips;
• High-speed automatic press "OHTSUKA HE-100" for simultaneous blanking of rotor and stator core plates, piled assembly of rotor and stator cores, with an automatic transportation line and separate packing of rotor and stator cores;
• High-performance automatic presses "AIDA" with 35, 60, 85, 110 tf force and uncoiling, straightening devices for sheet forming of parts from sheet and roll metal (with S = 0,25 - 2,0 mm) in an automatic and semi-automatic mode;
• Multipurpose crank presses with a 500-tf force and table measuring 1400x2400 and 1800x3000 mm;
• Multipurpose 1 and 2 upright presses and 1- and 2- crank presses with force of 6,3; 16; 25; 40; 63; 100; 160 tf;
• Hydraulic presses with a 160-tf force.