Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.eso.org/~jwalsh/softpol/demo/AAAREADME Дата изменения: Tue Nov 28 11:19:52 2000 Дата индексирования: Mon Feb 4 23:18:36 2013 Кодировка: Поисковые слова: п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п

This directory contains material for running demonstrations of the routines
in the IRAF.STECF package impol

To run these demonstrations IRAF/STSDAS is mandatory and the impol package
must be loaded

The directory is composed of the following files:

reflneb.fits A 512x512 intensity image of a model reflection nebula

demo_foc.cl
demo_nicmos.cl IRAF cl scripts for running the demo's for the
demo_wfpc2.cl four HST instruments (FOC, NICMOS, WFPC2 and ACS)
demo_foc.cl and a SPECIAL (non-HST) instrument
demo_special.cl instrument

demo_plot.cl IRAF cl script for producing the model polarization
image of the instrument demo's and plotting it

For each instrument a separate file is required giving the
polarization properties for each available filter. For FOC and
WFPC2 the data in these files have been produced by integrating
the polarization properties over the filter passband (c.f.
Biretta & McMaster, WFPC2 Polarization Calibration, HST WFPC2
ISR 97-11). For NICMOS the values have been taken from Hines,
Schmidt, & Schneider, 2000, Analysis of Polarized Light with
NICMOS, PASP, 112, 983. For ACS the data in these files have
been produced by integrating the polarization properties over
the filter passbands. The ACS data is strictly pre-flight and
provisional. The file for a non-HST instrument assumes a pefect
polarizer with polarizer rotations every 22.5 degrees.
The names of these files are as follows:

foc-pol-filt-001.tab
nicmos-pol-filt-001.tab Required STSDAS table files for providing
wfpc2-pol-filt-001.tab the instrumental characteristics
acs-pol-wfc-v-filt-001.tab
acs-pol-wfc-uv-filt-001.tab
acs-pol-hrc-v-filt-001.tab
acs-pol-hrc-uv-filt-001.tab
special-pol-001.tab

foc-pol-filt-001.dat
nicmos-pol-filt-001.dat ASCII data for the above STSDAS table files
wfpc2-pol-filt-001.dat for the instrumental characteristics
acs-pol-wfc-v-filt-001.dat
acs-pol-wfc-uv-filt-001.dat
acs-pol-hrc-v-filt-001.dat
acs-pol-hrc-uv-filt-001.dat
special-pol-001.dat

define.col Column definition file to create e.g. foc-pol-filt-001.tab
from foc-pol-filt-001.dat
[N.B. The .tab files were created under UNIX but are not readable under
Linux and other architectures. In this case the tables files can be
recreated by running:
tcreate table="foc-pol-filt-001.tab" cdfile="define.col" \
datafile="foc-pol-filt-001.dat" nskip=3
for example.]

reflneb.tab STSDAS table file providing the variation of polarization
for the model nebula
reflnebaper3.tab STSDAS table file providing the parameters of three
circular apertures for the aperture polarimetry task

reflneb.dat ASCII data file for the above STSDAS table for the model
nebula
model.col Column definition file to create reflneb.tab from
reflneb.dat
reflnebaper3.dat ASCII data file for the above STSDAS table for the
circular apertures
aperture.col Column definition file to create reflnebaper3.tab from
reflnebaper3.dat
[N.B. The tables files can be recreated by running e.g.
tcreate table="reflneb.tab" cdfile="model.col" datafile="reflneb.dat" nskip=0 ]

demo.tar.gz gzip'ed copy of whole contents of this directory
(after gunzip'ing restore with tar xvf demo.tar)

Last updated 28 November 2000

+---------------------------------------------------------------------------+
| Jeremy R. Walsh, E-mail: jwalsh@eso.org |
| Space Telescope European Co-ordinating Facility, |
| European Southern Observatory, Room: 519 |
| Karl-Schwarzschild-Strasse 2, Phone: +49 89 32006-248 |
| D-85748 Garching, FAX: +49 89 32006-480 |
| Germany WWW: http://www.stecf.org/~jwalsh/jwalsh.html |
+---------------------------------------------------------------------------+