Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.mrao.cam.ac.uk/~dag/THESIS/thesis.sty Дата изменения: Fri Apr 8 11:10:41 2016 Дата индексирования: Sun Apr 10 05:01:57 2016 Кодировка: Поисковые слова: http astrokuban.info astrokuban

\NeedsTeXFormat{LaTeX2e}
%==============================================================================%
% For PhD thesis template, based on LaTeX memoir class rather than the %
% standard book class, as memoir offers many additional configuration options. %
%==============================================================================%
\ProvidesPackage{thesis}[2016/04/04 Version 1.11 (Dave Green)]
%
\AtEndDocument{
\typeout{**************************************************************}
\typeout{* This is Version 1.11 of Dave Green's thesis template }
\typeout{* (see http://www.mrao.cam.ac.uk/~dag/THESIS/ for any updates)}
\typeout{**************************************************************}
}
%
% 1) set additional stylistic options for memoir package ...
%
% a) choose a chapter style (see Chapter 6 of the memoir manual, or
% the memoirchapterstyles package for other styles) or specify a
% custom chapter style ...
%
%\chapterstyle{brotherton}
%\chapterstyle{ell}
%\chapterstyle{ger}
%\chapterstyle{madsen}
%\chapterstyle{thatcher}
%\chapterstyle{wilsondob}
%
% or load particular customised style ...
%
\usepackage{mystyle}
\chapterstyle{mystyle}
%
% b) adjust the header style ...
% (for the default style \uppercaseheads is the default, but
% this can be switched off with \nouppercaseheads, or instead
% set up a pagealias to point to an alternate style)
%
\nouppercaseheads
%
%\aliaspagestyle{headings}{ruled}
%\aliaspagestyle{headings}{Ruled}
%
% c) remove vertical space in lists ...
% (or \defaultlists for default LaTeX vertical spacing)
% and change default labels to be 1) etc not 1. etc ...
\tightlists
\renewcommand{\labelenumi}{\theenumi)}
%
% d) set page size and marginal note dimensions ...
% (larger l=inner than r=outer margin, to allow for binding,
% and larger lower margin, as that looks better)
%
\setlrmarginsandblock{35mm}{30mm}{*}
\setulmarginsandblock{35mm}{40mm}{*}
%
\marginparmargin{outer}
\setmarginnotes{5mm}{20mm}{5mm}
%
% or if in larger (inner) margin, uncomment below ...
%
%\marginparmargin{inner}
%\setmarginnotes{5mm}{25mm}{5mm}
%
% then actually set the page layout ...
%
\checkandfixthelayout
%
% e) define caption style (smaller font, usually narrower)
% for tables and figures ...
% also define \captionof (cf. capt-of.sty)
%
\captionnamefont{\small\bfseries}
\captiontitlefont{\small}
%
\newlength\thesiscaptionwidth
\newcommand{\narrowcaptionwidth}{\setlength{\thesiscaptionwidth}{\linewidth}%
\addtolength{\thesiscaptionwidth}{-1.0cm}\captionwidth{\thesiscaptionwidth}%
\changecaptionwidth}
%
\narrowcaptionwidth
%
\newcommand\captionof[1]{\def\@captype{#1}\caption}
%
% f) do include bibliography in table of contents ...
%
\bibintoc
%
% g) number all sub-divisions, but only list down to sections
% in the table of contents ...
%
\maxsecnumdepth{all}
\maxtocdepth{section}
%
% h) use lower case letters for footnotes, not numbers ...
% (note: need to load after other packages ...)
%
\AtBeginDocument{\renewcommand\thefootnote{\alph{footnote}}}
%==============================================================================%
% 2) load babel for British english hyphenation ...
%
\usepackage[british]{babel}
%------------------------------------------------------------------------------%
% 3) load AMS packages for maths ...
%
\usepackage{amsfonts}
\usepackage{amsmath}
%------------------------------------------------------------------------------%
% 4) set fonts (with matching maths fonts) ...
% (for upright greek letters, use $\muup$ etc)
%
% Note: $\nu$ looks quite like $v$ with newtx, txfonts or pxfonts,
% so instead, either
% 1) explicitly use $\varv$ for a different `v', or
% 2) give the "varg" option to the font package (e.g.
% \usepackage[slantedGreek,varg]{newtxmath}") to
% use the alternate `v', which also uses alternate
% `w', `g' and `y' in maths ...
%
% a) use Times based fonts using newtxtext and newtxmath ...
%
\usepackage{newtxtext}
\usepackage[slantedGreek]{newtxmath}
\DeclareMathAlphabet{\mathbf}{OML}{ntxmi}{bx}{it}
%
% b) or use Times based txfonts, changing bold maths fonts for vectors ...
%
%\usepackage{txfonts}
%\DeclareMathAlphabet{\mathbf}{OML}{txmi}{bx}{it}
%
% c) or use Palatino based pxfonts, changing bold maths fonts for vectors ...
%
%\usepackage{pxfonts}
%\DeclareMathAlphabet{\mathbf}{OML}{pxmi}{bx}{it}
%
% for all of the above font options, make lowercase greek characters
% be letters, so can switch to bold for vectors ...
%
\DeclareMathSymbol{\alpha}{\mathalpha}{letters}{"0B}
\DeclareMathSymbol{\beta}{\mathalpha}{letters}{"0C}
\DeclareMathSymbol{\gamma}{\mathalpha}{letters}{"0D}
\DeclareMathSymbol{\delta}{\mathalpha}{letters}{"0E}
\DeclareMathSymbol{\epsilon}{\mathalpha}{letters}{"0F}
\DeclareMathSymbol{\zeta}{\mathalpha}{letters}{"10}
\DeclareMathSymbol{\eta}{\mathalpha}{letters}{"11}
\DeclareMathSymbol{\theta}{\mathalpha}{letters}{"12}
\DeclareMathSymbol{\iota}{\mathalpha}{letters}{"13}
\DeclareMathSymbol{\kappa}{\mathalpha}{letters}{"14}
\DeclareMathSymbol{\lambda}{\mathalpha}{letters}{"15}
\DeclareMathSymbol{\mu}{\mathalpha}{letters}{"16}
\DeclareMathSymbol{\nu}{\mathalpha}{letters}{"17}
\DeclareMathSymbol{\xi}{\mathalpha}{letters}{"18}
\DeclareMathSymbol{\pi}{\mathalpha}{letters}{"19}
\DeclareMathSymbol{\rho}{\mathalpha}{letters}{"1A}
\DeclareMathSymbol{\sigma}{\mathalpha}{letters}{"1B}
\DeclareMathSymbol{\tau}{\mathalpha}{letters}{"1C}
\DeclareMathSymbol{\upsilon}{\mathalpha}{letters}{"1D}
\DeclareMathSymbol{\phi}{\mathalpha}{letters}{"1E}
\DeclareMathSymbol{\chi}{\mathalpha}{letters}{"1F}
\DeclareMathSymbol{\psi}{\mathalpha}{letters}{"20}
\DeclareMathSymbol{\omega}{\mathalpha}{letters}{"21}
\DeclareMathSymbol{\varepsilon}{\mathalpha}{letters}{"22}
\DeclareMathSymbol{\vartheta}{\mathalpha}{letters}{"23}
\DeclareMathSymbol{\varpi}{\mathalpha}{letters}{"24}
\DeclareMathSymbol{\varrho}{\mathalpha}{letters}{"25}
\DeclareMathSymbol{\varsigma}{\mathalpha}{letters}{"26}
\DeclareMathSymbol{\varphi}{\mathalpha}{letters}{"27}
%
\DeclareMathSymbol{\Gamma}{\mathalpha}{letters}{"00}
\DeclareMathSymbol{\Delta}{\mathalpha}{letters}{"01}
\DeclareMathSymbol{\Theta}{\mathalpha}{letters}{"02}
\DeclareMathSymbol{\Lambda}{\mathalpha}{letters}{"03}
\DeclareMathSymbol{\Xi}{\mathalpha}{letters}{"04}
\DeclareMathSymbol{\Pi}{\mathalpha}{letters}{"05}
\DeclareMathSymbol{\Sigma}{\mathalpha}{letters}{"06}
\DeclareMathSymbol{\Upsilon}{\mathalpha}{letters}{"07}
\DeclareMathSymbol{\Phi}{\mathalpha}{letters}{"08}
\DeclareMathSymbol{\Psi}{\mathalpha}{letters}{"09}
\DeclareMathSymbol{\Omega}{\mathalpha}{letters}{"0A}
%
% for vectors, use slanted bold ...
%
\renewcommand{\vec}[1]{\mathbf{#1}}
%
% define some useful astronomical abbreviations ...
% (as per journals, for use in maths modes only)
%
\newcommand{\fdg}{^\circ\mkern-6.5mu.\mkern0.5mu}
\newcommand{\degr}{^\circ}
\newcommand{\arcmin}{'}
\newcommand{\farcm}{'\mkern-5mu.}
\newcommand{\arcsec}{''}
\newcommand{\farcs}{''\mkern-8mu.\mkern3mu}
\newcommand{\fh}{^{\rm h}\mkern-6mu.}
\newcommand{\fm}{^{\rm m}\mkern-8mu.\mkern3mu}
\newcommand{\fs}{^{\rm s}\mkern-6mu.}
\newcommand{\fp}{^{\rm p}\mkern-6mu.}
%
% define \ion for ionisation states
%
\newcommand\ion[2]{\textsc{#1\,\lowercase{#2}}}
%
% use T1 font encoding ...
%
\usepackage[T1]{fontenc}
%------------------------------------------------------------------------------%
% 5) load and setup bibtex for bibliographies ...
%
\usepackage{natbib}
\bibpunct[, ]{(}{)}{;}{a}{}{,}
\setlength{\bibsep}{0pt}
\renewcommand{\bibname}{References}
%------------------------------------------------------------------------------%
% 6) load graphicx for inclusion of .eps/.pdf figures ...
% (note: \graphicspath is set below for each chapter)
% and rotating (for sideways figures/tables) ...
% and xcolor package ...
%
\usepackage{graphicx}
\usepackage{rotating}
\usepackage{xcolor}
%------------------------------------------------------------------------------%
% 7) load pdfpages for inclusion of other .pdf documents ...
%
\usepackage{pdfpages}
%------------------------------------------------------------------------------%
% 8) load hyperef for hyperlinks ...
%
\usepackage{hyperref}
%
% if pdflatex, set pdf output options ...
%
\ifpdf
\hypersetup{pdftitle={This is the document title},
pdfauthor={Dave Green, MRAO, Cambridge, UK},
bookmarks=true,
bookmarksopen=false,
bookmarksnumbered=true}
\fi
%
% define links as coloured text, not boxed ...
%
% a) use standard named colours, which are rather bright ...
%
\hypersetup{colorlinks=true,
linkcolor=purple, % i.e. 0.75, 0.0, 0.25
citecolor=teal, % i.e. 0.0, 0.5, 0.5
urlcolor=violet} % i.e. 0.5, 0.0, 0.5
%
% or b) uncomment below to use darker colours ...
%
%\definecolor{mydarkpurple}{rgb}{0.3,0.0,0.2}
%\definecolor{mydarkteal}{rgb}{0.0,0.25,0.25}
%\definecolor{mydarkviolet}{rgb}{0.25,0.0,0.25}
%\hypersetup{colorlinks=true,
% linkcolor=mydarkpurple,
% citecolor=mydarkteal,
% urlcolor=mydarkviolet}
%
% or c) uncomment below for a dark grey for all links (e.g. for printing) ...
%
%\definecolor{mydarkgrey}{rgb}{0.15,0.15,0.15}
%\hypersetup{colorlinks=true,
% allcolors=mydarkgrey}
%
%----------------------------------------------------------------------------%
% Optional additional packages to load... uncomment if needed...
%
% a) lineno for linenumbers ...
%
%\usepackage{lineno}
%\linenumbers
%
% b) draftwatermark for `watermark' on each page ...
%
%\usepackage{draftwatermark}
%
% commands for date/time, and setup watermark in left margin ...
%
%\count@\time
%\divide\count@ 60
%\count2=-\count@
%\multiply\count2 60
%\advance\count2 \time
%\edef\datetime{\the\year/\two@digits{\the\month}/\two@digits{\the\day}\
% \two@digits{\the\count@}:\two@digits{\the\count2}}
%
%\SetWatermarkLightness{0.8}
%\SetWatermarkAngle{90}
%\SetWatermarkHorCenter{1.5cm}
%\SetWatermarkVerCenter{15cm}
%\SetWatermarkFontSize{1.5cm}
%\SetWatermarkText{\texttt{draft \datetime\ draft}}
%------------------------------------------------------------------------------%
% Other settings...
%------------------------------------------------------------------------------%
\renewcommand\baselinestretch{1.3} % increase linespacing..
%
% choose a) make all pages the same height...
%
%\flushbottom
%
% or b) do not make all pages the same height...
%
\raggedbottom
%
\setcounter{topnumber}{3} % settings for number of
\setcounter{bottomnumber}{2} % and fraction of page
\setcounter{totalnumber}{4} % containing Figures and
\renewcommand{\floatpagefraction}{0.8} % Tables...
%
% Define \note{...} command for marginal notes,
% and use this to define \todo{...} and \tocheck{...} ...
%
\newcommand\note[1]{\mbox{}\marginpar{\normalfont\tiny\raggedright
\hspace{0pt}#1\par}}
%
\definecolor{mydarkgreen}{rgb}{0.0,0.5,0.0}
\long\def\fixed#1{\note{\color{mydarkgreen}{***}}%
{\color{mydarkgreen}#1\color{black}}}
%
\newcommand\todo[1]{\note{\color{red}\textbf{To do:} #1}}
\newcommand\tocheck[1]{\note{\color{blue}\textbf{To check:} #1}}
%
% in addition, the memoir class provides \added{...}, \deleted{...} and
% \changed{...} commands to provide marginal notes to indicate
% revisions, and make these marks visible ...
%
\changemarks % or \nochangemarks to hide margin notes for changes ...
\draftdoctrue % so \changemarks work, even if "draft" option not use ...
%==============================================================================%
\endinput