Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.mrao.cam.ac.uk/projects/OAS/pmwiki/uploads/MROIDelayLine.ComponentDocumentation/MetrologY_parts_list.pdf
Дата изменения: Tue Jun 16 15:26:09 2009
Дата индексирования: Sat Mar 1 04:17:39 2014
Кодировка:

Поисковые слова: apollo 15
Parts list for MROI Metrology System v1.4.doc Page 1 of 11

MRO Delay Line

Parts list for the MROI Metrology System

The Cambridge Delay Line Team

rev 1.4 16 June 2009

Cavendish Laboratory JJ Thomson Avenue Cambridge CB3 0HE UK


Parts list for MROI Metrology System v1.4.doc Page 2 of 11

Change Record
Revision Date
0.1 0.2 1.0 1.1 1.2 1.3 1.4 15-12-2008 16-12-2008 04-02-2009 05-02-2009 19-02-2009 26-03-2009 16-06-2009

Author(s)
MF MF MF MF MF MF MF

Changes
First draft. Added shear system information Corrected Acromag part number on pages 7 and 10 Added beam expander lenses on pages 5, 9 and 11 Added beam compressor lenses on pages 5 and 9 Added handset power supplies on pages 7 and 9 Added VME system components on pages 8 and 10 Changed beam compressor achromats on pages 5 and 9 Specified VME CPU on pages 7 and 10 Changed supplier name for IP-DIGITAL-482 from Acromag to GE Fanuc on pages 7 and 10 Changed IP-DIGITAL-482 to Acromag IP470A on pages 7 & 10

Objective
This document presents the parts lists for the provision of the metrology system for the MROI Delay Line.

Scope
The general parts list is provided together with the lists of parts required for additional channels and two examples illustrating the parts for operating delay lines DL05 and DL06. Items to connect the VME System to other parts of the delay lines are not described here.

Applicable Documents
None

Contents
1 2 Introduction ............................................................................................................................. 3 Parts on the metrology optical table ........................................................................................ 5 2.1 Parts required for the laser distribution ........................................................................... 5 2.2 Parts required for each delay line beam expander assembly ........................................... 5 2.3 Additional parts required for beam expander assembly depending on the delay line position ........................................................................................................................................ 6 2.3.1 For Delay Line nos. 4, 7 and 10 .............................................................................. 6 2.3.2 For Delay Line nos. 1, 2, 5 and 8 ............................................................................ 6 2.3.3 For Delay Line nos. 3, 6 and 9 ................................................................................ 6 2.4 Shear System parts required for each delay line ............................................................. 6 2.5 Parts advised depending on which delay lines are not active ......................................... 7 2.6 Parts needed for alignment control.................................................................................. 7 3 Parts outside the inner beam combining area .......................................................................... 7 4 Example 1: to equip for Delay Line 5 ..................................................................................... 9 5 Example 2: Additional items for delay line 6 ....................................................................... 11

List of Figures
Figure 1 Layout and identification of components on the metrology bench. ................................. 3 Figure 2 Beam splitting arrangement for feeding up to ten delay line channels. ............................ 4


Parts list for MROI Metrology System v1.4.doc Page 3 of 11

1 Introduction
This document is constructed so that the general parts list provides the basic metrology system and further lists provide parts required for additional delay line channels. Two examples are provided; the first illustrating the parts required for setting up and operating delay line DL05 and the second illustrating the additional parts for setting up and operating DL06. For help with identifying the components and their placement on the metrology bench, Figure 1 is a diagram showing the first four delay line channels and is numbered to correspond with the parts listed in the tables which follow.

Figure 1 Layout and identification of components on the metrology bench.

In order to identify the additional components required for populating other delay line channels on the metrology bench a layout of the beam splitting arrangements is provided in Figure 2.


Parts list for MROI Metrology System v1.4.doc Page 4 of 11

Figure 2 Beam splitting arrangement for feeding up to ten delay line channels.


Parts list for MROI Metrology System v1.4.doc Page 5 of 11

2 Parts on the metrology optical table
This section lists all the parts that are mounted on the metrology bench in sets of tables which are arranged to provide the information necessary to calculate the items required for the addition of further delay line channels. Notes for superscripts are given here:
1 2 3 4 5

One needed for every delay line. Number depends on no of unused laser beams up to max of 4. One needed for every 2 delay lines. These lenses are provisional while better optimized catalogue lenses are analysed. These lenses are to be chosen in conjunction with beam expander lenses.

2.1 Parts required for the laser distribution
The set of parts required to provide the laser and the feed to all the delay line groups are set out in Table 1. Parts specially designed and manufactured are specified in the drawing set.
Table 1 Laser distribution parts

Part 1 1.1 1.2 1.2.1 1.2.2 2 2.1 2.1.1 2.2 2.2.1

Item Laser Head Assembly Laser Head Beam compressor assembly Lens Achromat 25 x 150 VIS 0 TS Lens Achromat 25 x -100 VIS 0 TS Laser beam splitter assembly Adjustable mount for part 2.1.1 50% beamsplitter Mirror mount Mirror 25mm

N o. 1 1 1 1 1 1 3 3 4 4

Manufacturer Part Number Drawing set Agilent 5517GL option 009 Drawing set Edmund NT47-643 Edmund NT62-494 Drawing set Agilent 10710A Agilent 10701A Newport P100-AI38 Thorlabs PF10-03-P01

2.2 Parts required for each delay line beam expander assembly
The set of parts required to provide each beam expander assembly are set out in Table 2. Additional parts are required depending on the delay line position as set out in section 2.3.
Table 2 Beam expander assembly parts

Part 3 3.1 3.2 3.3 3.3.1 3.4 3.4.1 3.4.2 3.5 3.5.1 3.5.2 3.6

Item Beam Expander Assembly1 Expander lens (25.4mm d -50mm f) Expander lens (50.8mm d 200mm f) Remotely steerable mirror mounts Mirror (25mm) Mount, shear camera beam sampler Actuators for item 3.4 Beam sampler (25mm 10-90) Adjustable mount for part 3.5.1 Linear interferometer Retro-reflector Remote sensor

N o. 1 2 2 4 4 1 2 1 1 1 1 1

Manufacturer Part Number Drawing set Thorlabs ACN254-050-A1 Thorlabs AC 508-200-A1 Newport AG-M100N Thorlabs PF10-03-P01 Newport U100-ACG Newport AJS100-0.5H Thorlabs BSF10-A1 Agilent 10711A Agilent 10702A Agilent 10703A Agilent E1706C


Parts list for MROI Metrology System v1.4.doc Page 6 of 11

2.3 Additional parts required for beam expander assembly depending on the delay line position
The parts required to divide/direct the laser for each delay line to be fed according to its position are set out in Table 3, Table 4 and Table 5.

2.3.1 For Delay Line nos. 4, 7 and 10
Table 3 Additional parts required to feed each of delay lines 4, 7 or 10

Part Item 3.7 Mirror mount 3.7.1 Mirror (25mm)

N o. 1 1

Manufacturer Part Number Newport P100-A138 Thorlabs PF10-03-P01

2.3.2 For Delay Line nos. 1, 2, 5 and 8
Table 4 Additional parts required to feed each of delay lines 1, 2, 5 or 8

Part Item 3.7 Adjustable mounts for part 3.7.1 3.7.1 33% beamsplitter

N o. 1 1

Manufacturer Part Number Agilent 10710A Agilent 10700A

2.3.3 For Delay Line nos. 3, 6 and 9
Table 5 Additional parts required to feed each of delay lines 3, 6 or 9

Part Item 3.7 Adjustable mount for part 3.7.1 3.7.1 50% beamsplitter

N o. 1 1

Manufacturer Part Number Agilent 10710A Agilent 10701A

2.4 Shear System parts required for each delay line
The set of parts required to provide the shear system for each delay line are set out in Table 6. Connections to the shear camera are listed in section 3.
Table 6 Parts required for the shear system of each delay line

Part Item 4 Shear camera assembly 1 4.1 Shear camera 4.2 Shear camera beam compressor 4.3 Laser filter 5 Shear camera beam bender 1 5.1 Mirror (12.5 mm) 5.2 Mirror mount 5.3 Clamping fork 5.4 Pedestal post holder 5.5 Stainless steel post (75 mm)

No. 1 1 1 1 1 1 1 1 1 1

Manufacturer Part Number Drawing set Unibrain Fire-i BBW 1.3. Opticron 40940 2.5UTA Thorlabs FL632.8-10 Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs PF05-03-P01 KS05 CF125 PH1E TR75M


Parts list for MROI Metrology System v1.4.doc Page 7 of 11

2.5 Parts advised depending on which delay lines are not active
These parts are to block any assembly to be aligned on alignment when other delay black card but an example of laser feed that is not used. This allows for the laser beam splitter installation of the first delay line without having to change the lines are added. The beam blockers could simply be made from a type that could be purchased is given in Table 7.
Table 7 Beam blocker parts

Part Item 6 Beam blocker Beam block Post holder Clamping Fork

2

N 1 1 1 1

o. to to to to

Manufacturer Part Number 4 LB1/M 4 Thorlabs PH1.5E 4 Thorlabs CF125 4 Thorlabs

2.6 Parts needed for alignment control
The parts needed to control the motorized mirrors on the beam expander assembly are listed in Table 8. There are four motorized mirrors and hence 4 controllers are specified so as to obtain independent control.
Table 8 Hand controllers for motorized mirrors

Part Item No. Manufacturer Part Number 3.3 4 Hand controllers 4 Newport AG-UC2

3 Parts outside the inner beam combining area
The parts required that are situated outside the inner BCA or connect to parts mounted on the metrology optical table are set out in Table 9.
Table 9 Parts situated outside the inner BCA, including cable connections to metrology parts

7 8 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8

Laser head power supply 1 Remote receiver 1 1-10 VME system VME card frame 1 1 1-5 1 1 1 1 1

Agilent Agilent

10884B E1709A

VME CPU plus disc drive Measurement board 3 IP carrier board 8-channel D-A IP pack Digital IO IP pack Low latency board Timing and frequency processor 10 Shear System 10.1 Shear camera computer1 10.2 Keyboard 10.3 Monitor 10.4 KVM switch

(12 slot min, with power supply and fan cooling) VP325/022-23U Concurrent Agilent 10898A TEWS TVME200-10 Acromag IP-220A-16 Acromag IP470A Drawing set Symmetricom TTM635VME-VCXO Eurotech APOLLO-ICE-G-P1.8FL-512MAC-NO_O/S Unspecified Unspecified Unspecified

1 1 1


Parts list for MROI Metrology System v1.4.doc Page 8 of 11 11 Cables 11.1 Receiver to measurement board 11.2 Fiber optic 1 11.3 Laser head to power supply and ref 11.4 Firewire cable10m1 11.5 Firewire repeater cable 4.5m1 Notes:1 2 3

1

1-10 1-10 1

Agilent Agilent Agilent

N1250A E1705F opt 400 (remote sensor to receiver) 10881C Lindy 30865 Lindy 32908

One needed for every delay line. Number depends on no of unused laser beams up to max of 4. One needed for every 2 delay lines.


Parts list for MROI Metrology System v1.4.doc Page 9 of 11

4 Example 1: to equip for Delay Line 5
The set of parts required to equip the first delay line (which is currently designated DL05) are set out in
Table 10 Parts required on metrology bench for channel DL05

Part 1 1.1 1.2 1.2.1 1.2.2 2 2.1 2.1.1 2.2 2.2.1 3 3.1 3.2 3.3 3.3.1 3.4 3.4.1 3.4.2 3.5 3.5.1 3.5.2 3.6 3.7 3.7.1 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 5.5 6

Item Laser Head Assembly Laser Head Beam compressor assembly Lens Achromat 25 x 150 VIS 0 TS Lens Achromat 25 x -100 VIS 0 TS Laser beam splitter assembly Adjustable mount for part 2.1.1 50% beamsplitter Mirror mount Mirror 25mm Beam Expander Assembly1 Expander lens (25.4mm d -50mm f) Expander lens (50.8mm d 200mm f) Remotely steerable mirror mounts Mirror (25mm) Mount, shear camera beam sampler Actuators for item 3.4 Beam sampler (25mm 10-90) Adjustable mount for part 3.5.1 Linear interferometer Retro-reflector Remote sensor Adjustable mounts for part 3.7.1 33% beamsplitter Shear camera assembly Shear camera Shear camera beam compressor Laser filter Shear camera beam bender Mirror (12.5 mm) Mirror mount Clamping fork Pedestal post holder Stainless steel post (75 mm) Beam blocker Beam block Post holder Clamping Fork 3.3 4 Hand controllers

N o. 1 1 1 1 1 1 3 3 4 4 1 2 2 4 4 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4

Manufacturer Part Number Drawing set Agilent 5517GL option 009 Drawing set Edmund NT47-643 Edmund NT62-494 Drawing set Agilent 10710A Agilent 10701A Newport P100-AI38 Thorlabs PF10-03-P01 Drawing set Thorlabs ACN254-050-A1 Thorlabs AC 508-200-A1 Newport AG-M100N Thorlabs PF10-03-P01 Newport U100-ACG Newport AJS100-0.5H Thorlabs BSF10-A1 Agilent 10711A Agilent 10702A Agilent 10703A Agilent E1706C Agilent 10710A Agilent 10700A Drawing set Unibrain Fire-i BBW 1.3. Opticron 40940 2.5UTA Thorlabs FL632.8-10 Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs Newport PF05-03-P01 KS05 CF125 PH1E TR75M LB1/M PH1.5E CF125 AG-UC2


Parts list for MROI Metrology System v1.4.doc Page 10 of 11
Table 11 Parts required outside the inner BCA to equip for operating one delay line

Part 7 8 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8

Item N o. Laser head power supply 1 Remote receiver 1 VME system VME card frame 1 1 1 1 1 1 1 1 1 1 1

Manufacturer Agilent Agilent

Part Number 10884B E1709A

VME CPU plus disc drive Measurement board IP carrier board 8-channel D-A IP pack Digital IO IP pack Low latency board Timing and frequency processor 10 Cables 10.1 Receiver to measurement board 10.2 Fiber optic 10.3 Laser head to power supply and ref

(12 slot min, with power supply and fan cooling) VP325/022-23U Agilent 10898A TEWS TVME200-10 Acromag IP-220A-16 Acromag IP470A Drawing set Symmetricom TTM635VME-VCXO Agilent Agilent Agilent N1250A E1705F opt 400 (remote sensor to receiver) 10881C


Parts list for MROI Metrology System v1.4.doc Page 11 of 11

5 Example 2: Additional items for delay line 6
Table 12 Additional items on metrology bench to provide for DL06

Part 3 3.1 3.2 3.3 3.3.1 3.4 3.4.1 3.4.2 3.5 3.5.1 3.5.2 3.6 3.7 3.7.1 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 5.5

Item Beam Expander Assembly1 Expander lens (25.4mm d -50mm f) Expander lens (50.8mm d 200mm f) Remotely steerable mirror mounts Mirror (25mm) Mount, shear camera beam sampler Actuators for item 3.4 Beam sampler (25mm 10-90) Adjustable mount for part 3.5.1 Linear interferometer Retro-reflector Remote sensor Adjustable mount for part 3.7.1 50% beamsplitter Shear camera assembly Shear camera Shear camera beam compressor Laser filter Shear camera beam bender Mirror (12.5 mm) Mirror mount Clamping fork Pedestal post holder Stainless steel post (75 mm)

N o. 1 2 2 4 4 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Manufacturer Part Number Drawing set Thorlabs ACN254-050-A1 Thorlabs AC 508-200-A1 Newport AG-M100N Thorlabs PF10-03-P01 Newport U100-ACG Newport AJS100-0.5H Thorlabs BSF10-A1 Agilent 10711A Agilent 10702A Agilent 10703A Agilent E1706C Agilent 10710A Agilent 10701A Drawing set Unibrain Fire-i BBW 1.3. Opticron 40940 2.5UTA Thorlabs FL632.8-10 Thorlabs Thorlabs Thorlabs Thorlabs Thorlabs PF05-03-P01 KS05 CF125 PH1E TR75M

Table 13 Additional items outside of inner BCA to provide for DL06

Part Item 8 Remote receiver 10 Cables 10.1 Receiver to measurement board 10.2 Fiber optic

N o. 1 1 1

Manufacturer Agilent Agilent Agilent

Part Number E1709A N1250A E1705F opt 400 (remote sensor to receiver)

Note that an additional Agilent measurement board is not required because each board handles two channels.