Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~astro/IDLCODE/bintotab.pro Дата изменения: Sat May 1 01:00:24 2004 Дата индексирования: Tue Oct 2 05:09:19 2012 Кодировка: Поисковые слова: http www.astronomy.com

pro bintotab,fname,intnum
;Program to take WAPP spectral line data and convert into a hacked regular
;fits table format.
;
;SYNTAX: bintotab,"Myfile.fits",intnum
;where intnum is the number of the integration output by WAPP into file
;"Myfile.fits"
;Data is returned as TAB_x_fname where x is the integration number, fname is
;the input filename.
;
;
;REMEMBER: ALFA FITS integrations are written in order as:
;1) Pixel 0, pol A
;2) Pixel 1, pol A
;3) Pixel 0, pol B
;4) Pixel 1, pol B
; and so on.
;
; Ignore the following errors reported by CHECK_FITS:
;% CHECK_FITS: NAXIS keywords in FITS header have been updated
;(Im still fiddling with CHECK_FITS to try and get it to accept these axes..)
;% CHECK_FITS: BITPIX value of -32 added to FITS header
;% Program caused arithmetic error: Floating divide by 0
;
; On further detail, I didn't get data with sensible RA and DEC (Probably
; because the tolerance was set to 'IGN', XS expects the data to be written
; IN DEGREES.


hdrtab=headfits(fname) ; get the header table from the file
fxbopen,poo,fname,1,hdrbin ; open binary file, extract header
fxbfind,poo,"TTYPE",cols,params,nf ; obtain all header words, and the number of them
fxbread,poo,spec,1,intnum ; get the actual spectrum out for this integration.

params=strcompress(params,/remove_all) ; get all the keyword names out of the binary header.


for i=1,nf-1 do begin ; read all the keyword values out of the binary header.
fxbread,poo,store,i+1,intnum
if size(store,/type) eq 1 then store=fix(store)
sxaddpar,hdrtab,params(i),store(0) ; and add them back into the regular fits table.
endfor


; Next: Add more numbers, or modify the existing ones, to make XS like this data.
sxaddpar,hdrtab,"NAXIS",3
sxaddpar,hdrtab,"NAXIS2",1,after="NAXIS"
sxaddpar,hdrtab,"NAXIS3",1,after="NAXIS2"
sxaddpar,hdrtab,"LINE","HI"
sxaddpar,hdrtab,"SCAN-NUM",intnum
sxaddpar,hdrtab,"COMMENT"," ",after="TELESCOP"
sxaddpar,hdrtab,"BSCALE",1.,after="COMMENT"
sxaddpar,hdrtab,"BZERO",0.0,after="BSCALE"
sxaddpar,hdrtab,"BUNIT","K",after="BZERO"
sxaddpar,hdrtab,"DATAMAX",max(spec)
sxaddpar,hdrtab,"DATAMIN",min(spec)
sxaddpar,hdrtab,"CTYPE1","FREQ"
sxaddpar,hdrtab,"VLSR",sxpar(hdrtab,"VELOCITY")*1000. & sxdelpar,hdrtab,"VELOCITY"
sxaddpar,hdrtab,"DELTAV",3.e+8*sxpar(hdrtab,"CDELT1")/sxpar(hdrtab,"CRVAL1")
sxaddpar,hdrtab,"OBSTIME",1,after="CRPIX3"
sxaddpar,hdrtab,"BZERO",0.
sxaddpar,hdrtab,"CRVAL1",0.0,after="CTYPE1"
sxaddpar,hdrtab,"CTYPE2","RA",after="CRPIX1"
sxaddpar,hdrtab,"CDELT2",0.0,after="CRVAL2"
sxaddpar,hdrtab,"CRPIX2",1,after="CDELT2"
sxaddpar,hdrtab,"CTYPE3","DEC",after="CRPIX2"
sxaddpar,hdrtab,"CDELT3",0.0,after="CRVAL3"
sxaddpar,hdrtab,"CRPIX3",1,after="CDELT3"
sxaddpar,hdrtab,"BITPIX",16
sxaddpar,hdrtab,"CENTFREQ",sxpar(hdrtab,"CRVAL1"),after="RESTFREQ"
sxaddpar,hdrtab,"IMAGFREQ",sxpar(hdrtab,"CRVAL1"),after="CENTFREQ"
sxaddpar,hdrtab,"DECOFF",0.0
;now remove some headers that xs does not need - (dont need to do this,
; but I did anyhow)
sxdelpar,hdrtab,"EXTEND"
sxdelpar,hdrtab,"BANDWID"
sxdelpar,hdrtab,"COMMENT"
sxdelpar,hdrtab,"REFERENC"
sxdelpar,hdrtab,"HISTORY"
sxaddpar,hdrtab,"RAOFF",0.0



writefits,"TAB_"+strcompress(string(intnum),/remove_all)+"_"+fname,$
spec,hdrtab ; finally... write out the data in fits format.
close,/all ; close anything left open
end