Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~astro/guide/node7.html
Дата изменения: Wed Feb 22 23:35:14 2012
Дата индексирования: Tue Oct 2 01:40:05 2012
Кодировка:
The ``Interim'' Correlator next up previous
Next: The ``WAPP'' Correlator Up: Back-End Signal Processors Previous: Back-End Signal Processors

The ``Interim'' Correlator

For spectral-line observing, the original post-upgrade ``interim'' correlation spectrometer provides four independent sub-correlators, each having eight chips with 1024 lags per chip. Each sub-correlator can be set up with its own independent bandwidth and configuration. Table 4 specifies the available configurations. The maximum bandwidth per sub-correlator is 50 MHz, with 8 other alternative bandwidths being available in decreasing octave steps. Popular configurations combine chips in groups of four to provide 9-level sampling (96% efficiency), interleaved operation (50-MHz bandwidth) or auto+cross correlation (i.e. all four Stokes parameters).


Table: ``Interim'' correlator configurations with all 4 digital filter boards

\begin{table}
\begin{center}
\begin{tabular}{\vert l\vert c\vert c\vert c\vert l...
...size of the output file will be proportional to the
number of lags.}
\end{table}% WIDTH=690 HEIGHT=592




Robert Minchin 2012-02-22