Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~astro/spectral_line/handbook_old/node15.html
Дата изменения: Thu May 31 22:51:38 2001
Дата индексирования: Sat Dec 22 22:15:54 2007
Кодировка:

INTEGRATION TIME (per Data Record)

This is the indivisible time after which your data is regularly dumped to the disk. On the gui it is the

The smaller you make this number (albeit you aren't allowed to go below 1ms) the larger your data file will be. So, if you are in a RFI-free frequency range, you may want to set your integration time to as much as 60s. However, if you are in a zone often affected by RFI, you may want to set this to be much smaller, say, 1s.