Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~astro/spectral_line/handbook/node6.html
Дата изменения: Wed Mar 20 17:44:08 2002
Дата индексирования: Sat Dec 22 17:14:14 2007
Кодировка:
Поисковые слова: universe

Run Correlator

This procedure is similar to the `Standard On' routine except that it completely ignores your source list and acquires data wherever the telescope is pointing. This means that no Doppler corrections are applied, and the correlator begins taking data as soon as the ``Observe!" button is pushed. The only adjustable parameters are the record dump time, scan duration, number of scans, frequency, and correlator board set-up. The downstairs power levels should be adjusted for this routine.

The ``Run Correlator" procedure is typically only used for telescope and RFI diagnostics.