Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/hardware/dds/doc/DDSCTRL.pdf Дата изменения: Tue Feb 15 22:00:31 2011 Дата индексирования: Tue Feb 5 04:02:22 2013 Кодировка: Поисковые слова: п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п п

Subject: DDS Parallel Controller Software Requirements File : DDSCTRL.WRI Date : February 6, 1998 Revision 5 I. IOSelA Write Table 1 : Data Word Description Bits Description 15 Set to 1 to identify Data Word 14,13 Device Selection 0 : 32-bit IPP Counter, IPP=(N+1)*40ns 1 : DDS1 (PlanetaryDownConverter LO/Xmitter Freq.) 48-bit STEL-1273 DDS, f=50MHz*N/(2e48) 2 : DDS2(SincFilter Clock/Xmit PN Code Generator) 48-bit STEL-1273 DDS, f=50MHz*N/(2e48) 3 : Transfer Relay Control Set to 1 on last DDS data word.(+) Unassigned Address : IPP registers : Address 0-3 DDS delta-phase register : Address 0-5 Transfer Relay Control : (don't care) Data Byte for IPP Counter, DDS1, and DDS2

12 11 10..8

7..0

Data Bit for Transfer Relay Control 0 : DDS's to Receiver, Fixed 20MHz to Transmitter 1 : DDS's to Transmitter, Fixed 20MHz to Receiver ___________________________ (+) Use Bit 12 in conjuction with the Data Ready Flag and Data Error Flag. Bit 12 sets Data Ready HI. The frequency update sets Data Ready LO. If the frequency update occurs before Data Ready is set HI, Data Error is set HI. The Data Error Flag is cleared by the Command Word. The Command Word also clears the Data Ready Flag.


Table 2 : Command Word Bit Assignments Bits Description 15 Set to 0 to identify Command Word 14,13,12 0 : Exit IPP Mode and Clear Flags 1 : Clear DDS's 2 : Update Immediate 3 : Update on tick 4 : Update on tick and then on every IPP 5.. 7 : Unassigned Unassigned

11-0

II. IOSelA Read Table 3 : Read Status Bits Description 15 Data Error Flag (+) 14 Data Ready Flag (+) 13 Updates on IPP enabled. 12 50 MHz Clock not present 11 1s Tick not present 10 Chassis Power / Cable not present III. IPACK Interrupts IntReq0 : Frequency Update Vector = 0xFF IntReq1 : 1s Tick Vector = 0xFE DDS lev Freq. 19MHz 20 21 els without filter Level Freq.(Image) -3.7dBm 31MHz -4.1 30 -4.4 29 Level(Image) -8.4dBm -7.7 -7.4