Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/spst/UnixTransition/doc/plot_obads_by_calendar.py Дата изменения: Fri Apr 8 12:46:12 2016 Дата индексирования: Mon Apr 11 06:28:36 2016 Кодировка: Поисковые слова: http www.badastronomy.com phpbb index.php

#
#MODULE plot_obads_by_calendar.py
#
#*****************************************************************************
"""
**PURPOSE** --
Check for issues with the FHST FOV of any of the OBADs scheduled on the
calendar.

**DEVELOPER** --
Merle Reinhart

**MODIFICATION HISTORY** --

o initial implimentation 4/13/15
o add get_obad_caldata - mdr 5/8/15
o add -after and -only switches - mdr 5/11/15
o abort if the *obad_problems.rpt alread exists - mdr 5/12/15
o allow list of times for -only - mdr 5/19/15
o allow non-default fov_control.nml namelist - mdr 6/24/15
o allow a non-ops PASS release to be specified - mdr 10/13/15
o code formatting updates - mdr 2/10/16
o Add the -v3pa override switch - mdr 3/28/16
o Cleanup doc string and no traceback if no input parameters - mdr 3/31/16
"""
#*****************************************************************************

__version__ = "16.03.31"

import os.path
import string
import spss_sys_util
import spst_getopt
import time_util
import ccl_util
import fhst_fov_check
import get_obad_caldata
import plot_all_obads

def run(*args):
"""Check for OBAD FOV issues.

do plot_obads_by_calendar [-after=|-only=[,]]
[-v3pa=]
[-namelist=]
[-release=new|ops|old]
[-uniquetag=]

Inputs:
calendar - The calendar to check the scheduled OBADs on
-after - Only check the OBADs after the provided time
-only - Only check the OBAD that occurs at the provided time(s)
Each time in the list must be unique.
Note: -after and -only are mutually exclusive
-v3pa - V3PA override angle(s) to use with the provided
-only time(s)
Note: only legal when provided in addition to -only
-namelist - Specifies the FHST_FOV control namelist to use.
Defaults to the fov_control.nml in the software nml
directory
-release - PASS Release to use - new|ops|old
Defaults to ops
-uniquetag - string to ensure the output file names are unique.
Defaults to an empty string
Probably most useful in combination with -v3pa

Outputs:
_.pdf - Plots of the FHSTs used
in the OBADs
_obad_problems.rpt - Summary file of the
problem OBADs
"""

# Setup a string translation table that will replace characters we don't
# want in some situations with underscores
bad_chars = string.punctuation.replace("_","").replace("-","") + string.whitespace
rep_chars = len(bad_chars) * "_"
trans = string.maketrans(bad_chars, rep_chars)

# Deal with the input parmeters and switches
legal_options = ['after=', 'only=', 'namelist=',' release=', 'v3pa=', 'uniquetag=']
options, parms = spst_getopt.spst_getopt(args, legal_options)

if (not parms):
print run.__doc__
#raise ValueError("No parameters were input")
return
else:
cclist = parms[0]
# end if

unique_string = ""
unique_switch = ""
if ('-uniquetag' in options):
# Replace any 'bad' characters with an underscore
unique_string = options['-uniquetag'].strip().translate(trans)
unique_switch = "-uniquetag=%s" % unique_string
# end if

switches = ""
use_after = False
if ('-after' in options):
use_after = True
after_time = str(time_util.spss_time(options['-after']))
switches = "-after=%s" % after_time
# end if

use_only = False
only_time = []
only_switch = ""
if ('-only' in options):
use_only = True
ttime = options['-only'].split(",")
for t in ttime:
only_time.append(str(time_util.spss_time(t)))
# end for t
switches = "-only=%s" % ",".join(only_time)
only_switch = switches
# end if

if (use_after and use_only):
raise ValueError("-after and -only are mutually exclusive")
# end if

use_v3pa = False
v3pa_ovr = []
v3pa_switch = ""
if ('-v3pa' in options):
use_v3pa = True
tv3pa = options['-v3pa'].split(",")
for v in tv3pa:
v3pa_ovr.append(float(v))
# end for v
v3pa_switch = "-v3pa=%s" % ",".join(tv3pa)
# end if

if (use_v3pa and not use_only):
raise ValueError("-only must be specified when -v3pa is specified")
# end if

if (use_v3pa):
if (len(only_time) != len(v3pa_ovr)):
raise ValueError("Number of -v3pa values must equal the number of -only values")
# end if
# end if

# Correlate the only_time and v3pa_ov4 lists
v3pa_override = {}
for o in range(0,len(only_time)):
v3pa_override[only_time[o]] = v3pa_ovr[o]
# end for o

release_switch = ""
if ('-release' in options):
release_name = options['-release'].lower()
else:
release_name = 'ops'
# end if
release_switch = "-release=%s" % release_name

namelist_switch = ""
use_namelist = False
if ('-namelist' in options):
use_namelist = True
namelist = options['-namelist']
namelist_switch = "-namelist=%s" % namelist
if (not os.path.exists(namelist)):
raise ValueError("Specified namelist %s does not exist" % namelist)
# end if
else:
# None requested so use namelist plot_obads_control.nml
pass_software_disk = spss_sys_util.resolver("PASS_SOFTWARE_DISK")
sw_dir = 'op_%s' % release_name
namelist_directory = os.path.join(pass_software_disk, '%s/nml/' % sw_dir)
namelist_file = 'plot_obads_control.nml'
namelist = os.path.join(namelist_directory, namelist_file)
namelist_switch = "-namelist=%s" % namelist
# end if

# Check to see if the input cclist exists
ccl = ccl_util.ccl(cclist)
if (not ccl.exists()):
raise IOError("Calendar %s doesn't exist." % cclist)
# end if

# Check to see if the *_obad_problems.rpt file already exists
problem_file = "%s%s_obad_problems.rpt" % (cclist.lower(), unique_string)
if (os.path.exists(problem_file)):
raise IOError("File %s already exists" % problem_file)
# end if

# Run the PASS FHST_FOV tool
status = fhst_fov_check.run(cclist, '%s' % namelist_switch, '%s' % release_switch, \
'%s' % v3pa_switch, '%s' % only_switch, '%s' % unique_switch)
if (status != spss_sys_util.SUCCESS):
print "An error occurred running the fhst_fov_check.py tool"
print "STATUS = %s" % status
print "Aborting..."
return
# end if

caldata_file = "%s%s_obad_caldata.pickle" % (cclist.lower(), unique_string)
status = get_obad_caldata.run(cclist, caldata_file, v3pa_override)

debug_file = "%s%s_slew.dbg" % (cclist.lower(), unique_string)
sum_file = "%s%s_slew.sum" % (cclist.lower(), unique_string)

# Run the plot_all_obads tool
if (use_after or use_only):
status = plot_all_obads.run(debug_file, sum_file, caldata_file,'%s' % switches)
else:
status = plot_all_obads.run(debug_file, sum_file, caldata_file)
# end if

print "OBAD Problem Summary can be found in the file:"
print "%s" % problem_file

return
# end def run







if __name__ == '__main__':
import sys
if len(sys.argv) > 1:
print sys.argv
run(*tuple(sys.argv[1:]))
else:
run()