Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.stsci.edu/~mperrin/kermit/quickstart.html
Дата изменения: Thu Mar 25 17:17:16 2004
Дата индексирования: Sat Mar 1 06:58:18 2014
Кодировка:
Kermit Quick Start
Start Kermit:
run starttraffic
run soundserver &
run ds9 &
run kermitui &
Use Kermit:
Set motors. Pick the desired settings from the drop-down lists,
then press Move. Generally you
will want M2=Goldmirror and Pupil=Large. The focus travel is from
-8800 to 0 and corresponds to about two centimeters of motion.
Select subarray. Use the subarray size, coadder, and offset
controls to the right of the main kermitui window to pick which portion
of the array to use. Coadders 0 and 1 are the good quadrant, in the
lower left. The blue portion of the array image will show the selected
portion of the array.
Set exposure time and number of exposures, then press Set.
Use the Exposure Palette window to easily switch between settings.
At the end of the night:
In the Exposure Palette window, select Take Darks from the File
menu. Adjust the suggested dark settings as desired, then press Go.
After the darks have completed, exit kermitui (be sure to save
settings when prompted).
Run movedata.pl to move
the night's data to an archival subdirectory.