Kermit Quick Start

Äîêóìåíò âçÿò èç êýøà ïîèñêîâîé ìàøèíû. Àäðåñ îðèãèíàëüíîãî äîêóìåíòà : http://www.stsci.edu/~mperrin/kermit/quickstart.html
Äàòà èçìåíåíèÿ: Thu Mar 25 17:17:16 2004
Äàòà èíäåêñèðîâàíèÿ: Sat Mar 1 06:58:18 2014
Êîäèðîâêà:
Ïîèñêîâûå ñëîâà: http astrokuban.info astrokuban

Kermit Quick Start

Start Kermit:

run starttraffic
run soundserver &
run ds9 &
run kermitui &

Use Kermit:

Set motors. Pick the desired settings from the drop-down lists, then press Move. Generally you will want M2=Goldmirror and Pupil=Large. The focus travel is from -8800 to 0 and corresponds to about two centimeters of motion.
Select subarray. Use the subarray size, coadder, and offset controls to the right of the main kermitui window to pick which portion of the array to use. Coadders 0 and 1 are the good quadrant, in the lower left. The blue portion of the array image will show the selected portion of the array.
Set exposure time and number of exposures, then press Set.
Use the Exposure Palette window to easily switch between settings.

At the end of the night:

In the Exposure Palette window, select Take Darks from the File menu. Adjust the suggested dark settings as desired, then press Go.
After the darks have completed, exit kermitui (be sure to save settings when prompted).
Run movedata.pl to move the night's data to an archival subdirectory.
Analyze data, then publish paper.