Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/pipermail/sas-uploads/2015-April.txt.gz Дата изменения: Tue Apr 14 06:27:09 2015 Дата индексирования: Sun Apr 10 02:02:52 2016 Кодировка: Поисковые слова: http astrokuban.info astrokuban

From Iris Traulsen Wed Apr 1 10:50:43 2015
From: Iris Traulsen (SAS Builder)
Date: Wed, 1 Apr 2015 10:50:43 GMT
Subject: [sas-uploads] eboxdetect-4.24.tgz
Message-ID: <201504011050.t31AohS4000690@sasbld01.net4.lan>

Package: eboxdetect-4.24.tgz - 674510 B
MD5: ac65f68bbb2e42d7cd77c93297a5953d
Uploaded by: Iris Traulsen
Accepted on: Wed Apr 1 10:50:43 2015 UTC
The most recent ChangeLog entry says:

Version 4.24 - 2015-03-31 (IT)
--------------
+ new parameter "obsmode" to distinguish between pointing and
slew-mode data (SCR 7279). Default: pointing.
+ eboxdetect_mod.f90: use a flat kernel
+ eboxdetect_mod.f90: Improved detection of faint extended sources.
subroutine msrbkg: Calculate preliminary equivalent likelihoods
of the candidate sources.
subroutine match: If irun (i.e.: ncom) > 1, check whether a
newly detected candidate has a counterpart in the previous
version of the source list AND (new:) whether the equivalent
likelihood of the counterpart is above the detection threshold
likemin. A previous detection with a likelihood below likemin
can be overwritten by a new one now. Otherwise, it might be
removed from the final source list because of its low
detection likelihood, and faint extended sources might be missed.
+ documentation updated



From Michael J. Freyberg" From: Michael J. Freyberg" Date: Wed, 1 Apr 2015 15:51:34 GMT
Subject: [sas-uploads] epchain-8.75.tgz
Message-ID: <201504011551.t31FpYg6029158@sasbld01.net4.lan>

Package: epchain-8.75.tgz - 63449 B
MD5: 6b8f6a288b4b7f41748dfc655b9c09c8
Uploaded by: Michael J. Freyberg
Accepted on: Wed Apr 1 15:51:34 2015 UTC
The most recent ChangeLog entry says:

Version 8.75 - 2015-04-01 (MJF)
-------------------------------
- (src/epchain): allow input list of offset maps (instead of the ones
identified by the OAL, or sometimes not identified ;-)
This is useful in the case when the offset maps were dumped before or after
the observation with different ObsID (e.g., early mission data, slews, ...)
Moreover, this new feature enables calibration work without changing contents
of ODF/SDF data or CCF files. The new interface is used in task "epreject".
This is controlled via new boolean parameter "withoffsetlist" (default "N")
that takes precendence over "withoffsetmap" if set to "Y": it opens the file
specified in new parameter "odilist" and reads the ODI name to be used
from there. The input list is an ASCII with 2-digit CCD number followed
by a blank and then the path to the offset map for that CCD (there can be
more than one offset map in that file so that the input file can be used
for the whole observation processing; only the first entry for a particular
CCD is used; the order does not matter). (SCR-7284)
- (config/epchain.*): as above
- (doc/epchain_description.tex): as above
- (DEPEND): needs `epreject-5.16'


From Michael J. Freyberg" From: Michael J. Freyberg" Date: Wed, 1 Apr 2015 15:51:44 GMT
Subject: [sas-uploads] epreject-5.16.tgz
Message-ID: <201504011551.t31FpibQ029297@sasbld01.net4.lan>

Package: epreject-5.16.tgz - 1509593 B
MD5: 0d305a1491baa0eb1d7c685903b9bc0e
Uploaded by: Michael J. Freyberg
Accepted on: Wed Apr 1 15:51:44 2015 UTC
The most recent ChangeLog entry says:

Version 5.16 - 2015-03-24 (MJF)
-------------------------------
- (src/epreject_mod.f90): allow input list of offset maps (instead of the ones
identified by the OAL, or sometimes not identified ;-)
This is useful in the case when the offset maps were dumped before or after
the observation with different ObsID (e.g., early mission data, slews, ...)
Moreover, this new feature enables calibration work without changing contents
of ODF/SDF data or CCF files.
This is controlled via new boolean parameter "withoffsetlist" (default "N")
that takes precedence over "withoffsetmap" if set to "Y": it opens the file
specified in new parameter "odilist" and reads the ODI name to be used
from there. The input list is an ASCII with 2-digit CCD number followed
by a blank and then the path to the offset map for that CCD (there can be
more than one offset map in that file so that the input file can be used
for the whole observation processing; only the first entry for a particular
CCD is used; the order does not matter). (SOC/SAS-SCR-7284)
- (config/epreject.*): as above
- (doc/epreject_description.tex): as above


From sasbuild@sasbld01.net4.lan Wed Apr 1 18:34:29 2015
From: sasbuild@sasbld01.net4.lan (SAS Builder)
Date: Wed, 1 Apr 2015 18:34:29 GMT
Subject: [sas-uploads] SAS manifest devtrack [xmmsas_20150401_1834_md5sums] uploaded
Message-ID: <201504011834.t31IYTxc004621@sasbld01.net4.lan>


From Aitor Ibarra Mon Apr 13 16:10:55 2015
From: Aitor Ibarra (SAS Builder)
Date: Mon, 13 Apr 2015 16:10:55 GMT
Subject: [sas-uploads] selectlib-4.73.tgz
Message-ID: <201504131610.t3DGAteU031131@sasbld01.net4.lan>

Package: selectlib-4.73.tgz - 205787 B
MD5: b825bf5ab0f15558f2f0951868829acb
Uploaded by: Aitor Ibarra
Accepted on: Mon Apr 13 16:10:55 2015 UTC
The most recent ChangeLog entry says:

Version 4.73 - 2015-13-03 (AI)
--------------
+ src/selcore/VectorFunctors.cc: The inner product of the median spacecraft attitude and the
current spacecraft attitude vectors can end up with a value greater than 1.0 (error propagation).
If this is the case, the ConeFilterLogic is wrong and the attitude is discared from the GTI returned by attfilter.
The result of the inner product is checked and if it is greater than one, the value is reseted to 1.0.


From sasbuild@sasbld01.net4.lan Mon Apr 13 18:32:48 2015
From: sasbuild@sasbld01.net4.lan (SAS Builder)
Date: Mon, 13 Apr 2015 18:32:48 GMT
Subject: [sas-uploads] SAS manifest devtrack [xmmsas_20150413_1832_md5sums] uploaded
Message-ID: <201504131832.t3DIWmoc029023@sasbld01.net4.lan>