Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/5.4.1/doc/epchain/ChangeLog Дата изменения: Mon Nov 18 19:57:28 2002 Дата индексирования: Sat Dec 22 07:39:40 2007 Кодировка: Поисковые слова: http astrokuban.info astrokuban

ChangeLog for epchain
===============================
open SPRs:
- none

Version 8.30.5 - 2002-11-18 (MJF)
---------------------------------
- (src/epchain): support for alternative Out-of-Time handling (as in 8.38)

Version 8.30.4 - 2002-11-11 (MJF)
---------------------------------
- (src/epchain): changed "badpixfind" values for "backgroundrate" (0.001
-> 0.0011) and "hienergythresh" (10.0 -> 12.0)
- (src/epchain): simplified "screenlowthresh" expression as there are no
negative PI values anymore since "epevents-6.30.3" (as in 8.31)

Version 8.30.3 - 2002-10-09 (MJF)
---------------------------------
- (config/epchain.par): fixed typo

Version 8.30.2 - 2002-10-03 (MJF)
---------------------------------
- (config/epchain.par): changed default of "keepintermediate": "cal" -> "none"
- (doc/epchain_description.tex): as above
- (doc/epchain_description.tex): changed \subsection{} to \taskparametersnote{}
in the parameters section, however, the new sub-parts now do not have an
automatic number anymore due to infrastructure definition
closed SPR:
- SSC-SPR-2962: HTML parameter documentation broken

Version 8.30.1 - 2002-08-07 (MJF)
---------------------------------
- (src/epchain): added "DLIMAP" to the extensions to be kept by `evlistcomb'
- (DEPEND): added "sas" as required by new infrastructure (sas-1.302)
- (DEPEND): added 'dscalc-2.2' and 'tabgtigen-2.8' and 'daltools-1.0'

Version 8.30 - 2002-04-12 (MJF)
-------------------------------
- (src/epchain): updated `epevents' long-term CTI handling
- (DEPEND): needs `epevents-6.31'

Version 8.29.8 - 2002-03-25 (MJF)
---------------------------------
- (src/epchain): stop with error if non-existing exposure should be processed,
the check for this was not active for setting "odfaccess=oal" [SSC-SPR-2818]
- (doc/epchain_description.tex): added three more examples
closed SPR:
- SSC-SPR-2818: Warning "Use of uninitialized value" should give error

Version 8.29.7 - 2002-03-19 (MJF)
---------------------------------
- (doc/epchain_description.tex): corrected a few typos

Version 8.29.6 - 2002-03-15 (MJF)
---------------------------------
- (doc/epchain_description.tex): corrected error labels

Version 8.29.5 - 2002-03-05 (MJF)
---------------------------------
- (src/epchain): activated a few engineering parameters for `epframes' to
prepare for ODFs from the Commissioning Phase
- (src/epchain): re-adjusted default "timebinsize";
- withhardmask=Y (7-15 keV):
100 [s] for FF + eFF modes, 200 for LW, 350 for SW, 100 for TI + BU modes
- withhardmask=N (0.2-10 keV):
10 [s] for FF + eFF modes, 20 for LW, 350 for SW, 10 for TI + BU modes
- (doc/epchain_description.tex): see above

Version 8.29.4 - 2002-03-01 (MJF)
---------------------------------
- (src/epchain): added some high verbosity level messages
- (src/epchain): addition to parameter "propagatecolumns" [SSC-SPR-2734]:
if "all" then all `epevents' output columns are propagated to IMAGING and
TIMING mode event lists [default: "auto"]
- (src/epchain): if "timebinsize=0" [default: 0] then the task choses default
values for lightcurve according to the instrument mode and energy range:
- withhardmask=Y (7-15 keV):
100 [s] for FF eFF LW modes, 200 [s] for SW TI BU modes
- withhardmask=N (0.2-10 keV):
20 [s] for FF eFF LW modes, 100 [s] for SW TI BU modes
- (doc/epchain_description.tex): see above

Version 8.29.3 - 2002-02-21 (MJF)
---------------------------------
- (src/epchain): make changes introduced by SSC-SPR-2734 (`epchain-8.29.1')
user-friendly backwards compatible via new parameter "propagatecolumns":
the setting "imaging" enables the old setting where the TI and BU mode files
had the same columns as for imaging modes. Default is "auto" which sets the
propagated columns according to the datamode (as of version 8.29.1)
- (doc/epchain_description.tex): see above

Version 8.29.2 - 2002-02-18 (MJF)
---------------------------------
- (src/epchain): fully enabled `usecanonicalnames=Y' setting [SSC-SPR-2106]
- (doc/epchain_description.tex): explain `usecanonicalnames=Y' output filenames

Version 8.29.1 - 2002-02-05 (MJF)
---------------------------------
- (src/epchain): reduce number of columns for TI and BU mode event files
- (doc/epchain_description.tex): adapt "Output files" section accordingly
closed SPR:
- SSC-SPR-2734: too many default columns for TI and BU modes

Version 8.29 - 2002-01-23 (MJF)
-------------------------------
- (src/epchain): update calling sequence for `epframes'
- (DEPEND): needs `epframes-8.46' and `eptestdata-0.4'

Version 8.28 - 2002-01-16 (MJF)
-------------------------------
- (src/epchain): update calling sequence for `epevents'
- (DEPEND): needs `epevents-6.30'

Version 8.27 - 2002-01-15 (MJF)
-------------------------------
- (src/epchain): enable background mask for SW mode
- (doc/epchain_description.tex): modified `badpixfind' calls in flow chart
- (doc/epchain_description.tex): added optional files to output files section
- (test/*): use in-orbit ODF (eptestdata/epodf_BU_TI/0029_*) for BU and TI modes

Version 8.26 - 2002-01-10 (MJF)
-------------------------------
- (src/epchain): renamed `eppatplot' to `epatplot'
- (doc/epchain_description.tex): as above
- (DEPEND): needs `epatplot-1.0'

Version 8.25 - 2002-01-09 (MJF)
-------------------------------
- (src/epchain): update calling sequence for `epframes'
- (src/epchain): optional call to `eppatplot' with final event list as input,
default "withpatplot=N" (no call)
- (DEPEND): needs `eppatplot-1.7'

Version 8.24 - 2001-12-19 (MJF)
-------------------------------
- (test/epchain_test_IM): change input ODF to Rev.146 in-orbit data
- (test/checkoutput_IM.f90): adapt checks accordingly
- (DEPEND): needs `eptestdata-0.3'

Version 8.23 - 2001-12-14 (MJF)
-------------------------------
- (src/epchain): for "withhardmask=Y" use explicit high-energy pattern/energy
default expression when creating background lightcurve
- (src/epchain): merge offset column extensions OFFSETS into one extension
- (DEPEND): needs `evlistcomb-4.17' (made all other entries at least SAS-5.2.1)

Version 8.22 - 2001-12-13 (MJF)
-------------------------------
- (src/epchain): ensure that PATH read from SUM.SAS file ends with a slash
- (src/epchain): renamed offset column extension to be merged
- (DEPEND): needs `epframes-8.37' (renamed OFFSETCO -> OFFSETS)
closed SPR:
- SSC-SPR-2578: Wrong parse of SAS_ODF [PATH from SUM.SAS file]

Version 8.21 - 2001-09-15 (MJF)
-------------------------------
- (src/epchain): call `badpix' and `dscopyblock' in low memory mode which makes
the chain faster for large event files

Version 8.20 - 2001-09-01 (MJF)
-------------------------------
- (src/epchain): add line "use 5.005;" to match SAS installation requirements
- (src/epchain): add creation of background GTI file (via `tabgtigen')
- (src/epchain): new parameter "flaremaxrate" for background GTI creation
- (src/epchain): new parameter "usecanonicalname" to autocreate output names,
not fully implemented yet
- (src/epchain): update calling sequences for `epframes' and `epevents'
- (DEPEND): needs `epframes-8.35' and `epevents-6.22'

Version 8.19 - 2001-06-18 (MJF)
-------------------------------
- (src/epchain): give certain messages also for SAS_VERBOSITY=0 (-v, -p)
- (src/epchain): if SAS_ODF is ASCII file then try to extract PATH from
this file, if not found then keep the current behaviour (i.e. assume that
summary file is in ODF directory)
closed SPRs:
- SSC-SPR-2432: epchain --h or --p (and -v) does not work
- SSC-SPR-2431: epchain does not read PATH from SUM.SAS file

Version 8.18.4 - 2001-06-01 (MJF)
---------------------------------
- (src/epchain): corrected execution rights
- (doc/epchain_description.tex): new section "incomplete ODFs", corrected typos

Version 8.18.3 - 2001-05-25 (MJF)
---------------------------------
- (src/epchain): drop selection RAWY>10

Version 8.18.2 - 2001-05-07 (MJF)
---------------------------------
- (src/epchain): avoid follow-up error messages in case of missing files
- (src/epchain): use "SAS::message" etc. instead of "print" [SSC-SPR-2375]
closed SPR:
- SSC-SPR-2375: use "SAS::message" etc. instead of "print"

Version 8.18.1 - 2001-05-03 (MJF)
---------------------------------
- (src/epchain): for TI and BU mode use ``emptyextension=Y'' [SSC-SPR-2244]

Version 8.18 - 2001-04-23 (MJF)
-------------------------------
- (src/epchain): remove now obsolete evselect parameter `calculatebackscale=N'

Version 8.17 - 2001-04-10 (MJF)
-------------------------------
- (src/epchain): renamed parameter `crmap' to `witheventmap' [SSC-SPR-1723]
- (src/epchain): new optional parameter `withphotonmap'
- (config/epchain.*): new optional parameters
- (doc/epchain_description.tex): new optional parameters
- (badpixfinddata): removed obsolete directory
- (test/epchain_test_*): link to files in `eptestdata'
- (DEPEND): depend on epevents-6.14 + epframes-8.27 + eptestdata-0.2

Version 8.16.2 - 2001-03-15 (MJF)
---------------------------------
- (src/epchain): for TI and BU mode use ``getuplnkbadpix=N'' [SSC-SPR-2244]
- (src/epchain): new optional parameter ``withtempcorrection'' (default NO) to
enable test and verification of additional gain and CTI corrections,
considered as ``temporary'' and ``experimental'' [epevents-6.12.2]
- (src/epchain): new optional parameter ``withhardmask'' (default NO) to
use energy band 7-15 keV instead of 0.16-10 keV to create background mask
- (src/epchain): updated parameter values for background mask determination
- (config/epchain.*): add new optional parameters
- (doc/epchain_description.tex): new optional parameters
- (DEPEND): updated
closed SPR:
- SSC-SPR-2244: Uplinked bad pixel problem for pn TIMING and BURST mode

Version 8.16.1 - 2001-02-14 (MJF)
---------------------------------
- (src/epchain): corrected execution rights
- (src/epchain): do not try to use masks for background lightcurve if no
unmasked pixel is left for some reason (avoid null selection)
[this was already checked for but at a too late place in the chain]

Version 8.16 - 2001-01-22 (MJF)
-------------------------------
- (src/epchain): new parameter ``withoutoftime'' to enable analysis of
out-of-time events, considered as ``experimental'' [SOC-SCR-25]
- (config/epchain.*): add new parameter ``withoutoftime''
- (doc/epchain_description.tex): add subsection about out-of-time events,
restructured parameter section
- (DEPEND): depend on epevents-6.11

Version 8.15.8 - 2000-12-12 (MJF)
---------------------------------
- (src/epchain): updated parameter values for badpixfind calls
closed SPR:
- SSC-SPR-2147: New recommended parameter values for task badpixfind

Version 8.15.7 - 2000-11-23 (MJF)
---------------------------------
- (doc/epchain_description.tex): updated output file section (background
lightcurve and masks) and added examples subsection
closed SPR:
- SSC-SPR-2106: rate_bkg.fits undescribed

Version 8.15.6 - 2000-11-15 (MJF)
---------------------------------
- (src/epchain): background rate to account for masked area and time bin
- (src/epchain): activate "odfaccess=name"
- (doc/epchain_description.tex): updated flow chart
closed SPR:
- SSC-SPR-2075: background lightcurve does not use size of masked area
- SSC-SPR-2078: Parameter "odfaccess=name" not active

Version 8.15.5 - 2000-11-11 (GV/SOC)
--------------
+ (src/epchain) write CONTENT to primary header instead of
EVENTS extension.

Version 8.15.4 - 2000-11-06 (MJF)
---------------------------------
- (src/epchain): write CONTENT keyword (not done by `evlistcomb' anymore)
(SSC-SPR-2010)

Version 8.15.3 - 2000-10-28 (MJF)
---------------------------------
- (src/epchain): changed filename field from IMEVLI to PIEVLI
- (test/checkoutput_IM.f90): updated filename and CONTENT
closed SPR:
- SSC-SPR-2010: Wrong file names for event files

Version 8.15.2 - 2000-10-25 (MJF)
---------------------------------
- (doc/epchain_description.tex): extended subsection about flare screening
- (src/epchain): updated `epframes' call
closed SPR:
- SSC-SPR-1999: call of constituent tasks not updated

Version 8.15.1 - 2000-10-19 (MJF)
---------------------------------
- (src/epchain): adapted `attcalc' call (SSC-SPR-1990)

Version 8.15 - 2000-10-10 (MJF)
---------------------------------
- resubmitted version 8.14.1

Version 8.14.1 - 2000-10-10 (MJF)
---------------------------------
- (src/epchain): do not use results of `badpixfind' for TI and BU mode
- (src/epchain): do not use masks for SW TI BU mode background lightcurve
- (doc/epchain_description.tex): updated parameters and background section
closed SPRs:
- SSC-SPR-1976: should not use badpixfind results for TI and BU modes

Version 8.14 - 2000-10-09 (MJF)
---------------------------------
- (src/epchain): create background lightcurve for later flare screening

Version 8.13 - 2000-10-06 (MJF)
---------------------------------
- (src/epchain): write pn-related CCF entries (EPN XMM XRT3) as extension
- (test/epchain_test_*): change parameters in call of `epchain'

Version 8.12 - 2000-10-05 (MJF)
---------------------------------
- (src/epchain): use results of `badpixfind' (new parameter values) by default
- (config/epchain.par): default value changed: getnewbadpix=N -> Y

Version 8.11 - 2000-09-29 (MJF)
---------------------------------
- (test/check_output_*.f90): altered FILTER check from "NONE" to "UNKNOWN"

Version 8.10 - 2000-09-25 (MJF)
---------------------------------
- (src/epchain): re-install correct privileges (go+x)

Version 8.9 - 2000-09-22 (MJF)
---------------------------------
- (DEPEND): updated version numbers (e.g. epframes, evselect etc)
- (src/epchain): allow input of summary file itself as ODF
- (test/checkoutput_*.f90): update TIMEDEL existence check

Version 8.8 - 2000-08-25 (MJF)
---------------------------------
- (DEPEND): updated dependencies (e.g. "epevents-6.9")
- (src/epchain): changed default "imagesize" (0.34 -> 0.36) [SSC-SPR-1950]
- (src/epchain): call evselect with "updateexposure=Y" [SSC-SPR-1920]
- (src/epchain): reduce size of EXPOSUnn extensions at end of chain
- (src/epchain): adapted parameter interface (e.g. "randomizeenergy")
- (config/epchain.*): corrected info file, adapted to changed parameters

closed SPRs:
- SSC-SPR-1950: Default for imagesize
- SSC-SPR-1920: Does not fill the ONTIMEnn and LIVETInn keywords

Version 8.7.7 - 2000-06-30 (MJF)
---------------------------------
- (doc/epchain_description.tex): describe all parameters separately

closed SPR:
- SSC-SPR-1900: Split parameter description

Version 8.7.6 - 2000-06-26 (MJF)
---------------------------------
- (doc/epchain_description.tex): \param{} -> \tt{} for outdated parameters etc.
- (src/epchain): special care of list parameters (e.g. epnimgcolnames)

Version 8.7.5 - 2000-06-24 (MJF)
---------------------------------
- (test/epchain_test_IM): fix Linux test harness failure with original ODF
- (test/epchain_test_*): remove `printenv` in test harness
- (src/epchain): add "odfexpand" to constituents for option "-v"
- (src/epchain): insert switch to remove intermediate files

Version 8.7.4 - 2000-06-21 (MJF)
---------------------------------
- (src/epchain): change screening to |PI| > 150

Version 8.7.3 - 2000-06-16 (MJF)
---------------------------------
- (DEPEND): updated dependencies, added `tools-1.34' (odfexpand)
- (src/epchain): screen eventlist (PI > 150 eV), new warning(notInODF)
- (doc/epchain_description.tex): updated error/warning section

closed SPRs:
- SSC-SPR-1710: Problems handling window mode data (OAL is updated)

Version 8.7.2 - 2000-06-15 (MJF)
---------------------------------
- (src/epchain): fixed failure of test harness with low verbosity
- (src/epchain): added `-v' and `-p' to recognized options
- (doc/epchain_description.tex): updated comments section

closed SPR:
- SSC-SPR-1820: epchain -v does not return a version number

Version 8.7.1 - 2000-06-14 (MJF)
---------------------------------
- minor changes in verbosity of output, replace empty lines by string "++"
- remove (large) recombined intermediate file at the end of the chain
- updated documentation, updated test harness for TI and BU mode
- prepare fix of SSC-SPR-1710 (requires updated OAL)

closed SPRs:
- SSC-SPR-1677: Operation from GUI and AHF usage:
avoid problem in gui-1.24 (SOC-SPR-1381) by removing empty output lines
- SSC-SPR-1734: Minimum X value below TLMIN6:
fixed with attcalc-4.22.1

Version 8.7 - 2000-05-29 (MJF)
-------------------------------
- output file now has GTI extensions, updated test harness + DEPEND
- run badpixfind but do not use results by default

Version 8.6 - 2000-05-08 (MJF)
-------------------------------
- adopt new ChangeLog header line style
- added `epframes.info' to config subdirectory and Makefile
- added `-w 10' to task constituent calls
- added task `evselect' to constituents
- output filenames now conform with XMM-SOC-ICD-0006-SSC
- added test harness for TIMING and BURST mode
- added ONBOARD mip rejection method
- updated DEPEND

closed SPRs:
- SSC-SPR-1198: Harness files do not contain data for TIMING and BURST mode
- SSC-SPR-1329: Warning messages (mostly CAL-related)
- SSC-SPR-1571: no exposure keyword in PN images

Version 8.5 (07.03.00)
----------------------------
- new parameter "mipdist" (epframes-8.6)

Version 8.4 (23.02.00)
----------------------------
- changed parameters according to epframes (epframes 8.5)
- fixed config files (Makefile, par, lyt)

Version 8.3 (21.02.00)
----------------------------
- changed parameters according to epevents (epevents 8.2)

Version 8.2 (17.02.00)
----------------------------
- fixed DEPEND (epframes 8.2)

Version 8.1 (15.02.00)
----------------------------
- new optional parameter "memorymodel" for task "evlistcomb"
- more parameters for task "evlistcomb"

Version 8.0 (21.01.00)
----------------------------
- changed implementation from C-shell to Perl script
- extended parameter interface
- added basic GUI interface
- removed obsolete task epreject
- changes according to new versions of tasks epframes, badpixfind,
badpix, epevents
- extended documentation about OAL exposure numbers

closed SPRs:
- SSC-SPR-1447: bad exposure number

Version 7.2 (26.01.00)
----------------------------
- added optional run of task "badpixfind"

Version 7.1 (18.01.00)
----------------------------
- fixed error output

Version 7.0 (17.01.00)
----------------------------
- new command line parameters to modify randomization_on
and to toggle use of badpixfind results
- updated for new epframes version

closed SPRs:
- SSC-SPR-1392: epchain should use randomisation by default
- SSC-SPR-1400: randomization_on parameter should be set to true
- SSC-SPR-1386: epchain should work with no special bad pixels files

Version 6.8 (04.12.99)
----------------------------
- removed test on existence and setting of DETNAM attribute

Version 6.7 (30.11.99)
----------------------------
- test harness does no longer test setting of the EXP_ID attribute
(too fragile as it now contains also info on OBS_ID)
- changed SAS_ODFDIR to SAS_ODF in epchain script and test harness

Version 6.6 (11.10.99)
----------------------------
- updated for evlistcomb-4.0

closed SPR:
- SSC-SPR-1251: test harness fails on linux

Version 6.5 (29.09.99)
----------------------------
- removed test on the setting of OBS_ID (too fragile)

Version 6.4 (24.09.99)
----------------------------
- fixed test harness exit status

Version 6.3 (18.09.99)
----------------------------
- doc updated for new LaTeX macros
- test harness reference file has been removed

closed SPRs:
- SSC-SPR-1242: test harness fails
- SSC-SPR-1143: Negative PI values in merged_events.dat

Version 6.2 (03.09.99)
----------------------------
- removed tests on the settings of DATE-OBS and DATE-END (too fragile)
- new reference file in the test harness: scisimmultimode changed

open SPRs:
- SSC-SPR-1143: Negative PI values in merged_events.dat
- SSC-SPR-1198: Harness files do not contain data for TIMING and BURST mode

Version 6.1 (02.09.99)
----------------------------
- new reference file in the test harness: scisimmultimode changed

Version 6.0 (01.09.99)
----------------------------
- includes atthkgen task
- new command line parameters to specify exposure number and name of
output merged data set
- uses testodf/scisimmultimode for the test harness

closed SPR:
- SSC-SPR-1201: EPCHAIN sends warnings when not all CCD are selected

Version 5.0 (03.08.99)
----------------------------
- introduced new command line parameter to specify directory where
badpixfind data files are kept

Closed SPR:
- SSC-SPR-1148: hard wired calibration etc interfaces

Version 4.0 (02.08.99)
----------------------------
- introduced new command line parameter to epchain to choose between IMAGING,
TIMING and BURST mode input data
- epevents has new parameter "randomization_on"
- another update of the test harness

Version 3.1 (28.06.99)
----------------------------
- update of the test harness (to account for cal changes)

Version 3.0 (16.06.99)
----------------------------
- updated for changes in ep* tasks
- new merged_events.ref reference file in test

Version 2.3 (31.05.99)
----------------------------
- new merged_events.ref reference file in test

Version 2.2 (28.05.99)
----------------------------
- epchain documentation fixed for \newcommand{\column}

Version 2.1 (27.05.99)
----------------------------
- updated for new task parameter names

Version 2.0 (21.04.99)
----------------------------
- updated for new task parameter names
- include offset file for epframes: epchain/offset/OFFSET_EPN.fits
- changed order of events in epodf/ODF files: FRAME, RAWY, RAWX

Version 1.4 (10.12.98)
----------------------------
- removed checks for differences between test output and reference file
in respect to X, Y, detX and detY columns (while the CCF is not settled)

Version 1.3 (08.12.98)
----------------------------
- updated documentation and test harness
- new odf example input data

Version 1.2 (23.11.98)
----------------------------
- changed place where attcalc is called to have a common MOS/PN approch
in both mini-pipelines epchain and emchain.
- updated for renamed BADPIX extension column BADPIXTYPE -> TYPE
!!! evlistcomb_2.1 has not yet been updated - I am using
!!! a predelivery version of evlistcomb_2.2

closed SPRs:
- SSC-SPR-0830: fails on Odf::Odf - Odf summary file has been updated

Version 1.1 (03.11.98)
----------------------------
- minor updates as tasks have been updated after SAS V2 I&T procedure
- SASVERBOSITY will not be changed by epchain
- new ODF example file with RAWX, RAWY coordinates and overall CCD
numbering in agreement with SciSim and CAL standards

Version 1.0
----------------------------
- updated version for new pn task deliveries
- new epodf_short ODF example file which can be processed with
epframes v1.8 (and oal2.2)

Version 0.1
----------------------------
- First version submitted to SOC