Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/5.4.1/doc/epframes/ChangeLog Дата изменения: Fri Jan 10 17:58:36 2003 Дата индексирования: Sat Dec 22 08:14:37 2007 Кодировка: Поисковые слова: http astrokuban.info astrokuban

ChangeLog for epframes
===============================
open SPRs:
- SSC-SPR-2981: Subscript 1 of ARREXPTIME is out of range [0482_0111290601_PNS003 Q2]
- SSC-SPR-3000: Subscript 1 of ARREXPTIME is out of range [0103 0111020201_PNS003 Q1]

Version 8.46.12 - 2003-01-10 (MJF)
----------------------------------
- (src/epframes_mod.f90): access F1828,1829,F1830 and F1628,1629,1630 columns
instead of F1528,1529,1530 to identify the uploaded BadPixelTable code,
this automatically enables the identification of masked mode flavours
closed SPRs:
- SSC-SPR-2417: Inconsistent time related keywords
- SSC-SPR-3064: BadPixelTable coding accesses wrong HK columns

Version 8.46.11 - 2002-10-09 (MJF)
----------------------------------
- (src/epframes_mod.f90): added 0045_0120300101_PNS005 to black-list

Version 8.46.10 - 2002-10-03 (MJF)
----------------------------------
- (src/epframes_mod.f90): removed CATEGORY keyword from event list
- (doc/epchain_description.tex): changed \subsection{} to \taskparametersnote{}
in the parameters section, however, the new sub-parts now do not have an
automatic number anymore due to infrastructure definition
closed SPRs:
- SSC-SPR-2989: please remove CATEGORY keyword
- SSC-SPR-2962: HTML parameter documentation broken

Version 8.46.9 - 2002-08-22 (MJF)
---------------------------------
- (src/epframes_mod.f90): extract DLI rate also from PMH file as this quantity
is not affected by counting mode (unlike the AUX2 derived values)

Version 8.46.8 - 2002-08-07 (MJF)
---------------------------------
- (src/epframes_mod.f90): initialize variables at run time instead of during
variable declaration so that metatask usage does not fail [SSC-SPR-2819]
- (src/epframes_mod.f90): enable analysis of DLI files (preliminary version)
- (src/epframes_mod.f90): add warning in case of "MIP CORREC.1"
- (doc/epframes_description.tex): as above
closed SPR:
- SSC-SPR-2819: Implicitly saved variables cause epproc to fail

Version 8.46.7 - 2002-07-26 (MJF)
---------------------------------
- (src/epframes_mod.f90): increased "late-time-reset" parameter from 16 to 100
for TI and BU modes to solve a problem with 0411_0153750301_PNS001 (CCD 4).
Was accidentally not included in previous version.
closed SPRs:
- SSC-SPR-2776: ARRFRACEXP out of range [0044_0119710201_PNS001]
- SSC-SPR-2816: Too many warnings in uncritical cases

Version 8.46.6 - 2002-06-03 (MJF)
---------------------------------
- (src/epframes_mod.f90): adjusted the internal "late-time-reset" parameter
from 1 to 2 for FF and eFF modes [SSC-SPR-2815], this fixes also problems
that occured for 0032_0117500201_PNS011 (CCD 10) and 0042_0119100201_PNU003
(CCDs 4-9), increased this parameter from 16 to 100 for TI and BU modes to
solve a similar problem with 0411_0153750301_PNS001 (CCD 4). No changes
for SW and LW modes (no problems known).
closed SPR:
- SSC-SPR-2815: Event time computation fails for 2 ODFs [0193_9019300003_PNS003, 0224_0093620801_PNU003]

Version 8.46.5 - 2002-04-05 (MJF)
---------------------------------
- (doc/epframes_description.tex): minor reorganization, added another example

Version 8.46.4 - 2002-03-08 (MJF+UL)
------------------------------------
- (src/epframes_mod.f90): resolved exposure confusion case (e.g. S003 and U003
in ODF like 0238_0029340101, SSC-SPR-2628)
- (src/epframes_mod.f90): write warning "tooLongExposure" if the observation
duration (DATE_END - DATE_OBS) is shorter than the elapsed time of this
exposure (derived via TSTOP - TSTART)
- (doc/epframes_description.tex): added warning "tooLongExposure"
- (doc/epframes_description.tex): completed sections "OAL usage" and "CAL usage"
- (test/*_SW.*): added check for RA/DEC to RAWX/RAWY conversion

Version 8.46.3 - 2002-02-21 (MJF)
---------------------------------
- (test/*_SW*): added basic run for SW mode
- (src/epframes_mod.f90): made MIP rejection even more robust [SSC-SPR-2779]
- (src/epframes_mod.f90): added 0044_0119710201 (all 4 exposures) to black-list
of incorrectly produced data sets (wrong energy scale) [SSC-SPR-2776]
closed SPR:
- SSC-SPR-2779: MIP rejection not robust against meaningless HK parameters

Version 8.46.2 - 2002-02-20 (MJF)
---------------------------------
- (src/epframes_mod.f90): slight modifications for messages in high verbosity
levels to ease debugging of memory problems
- (src/epframes_mod.f90): made MIP rejection robust against meaningless HK
values by using then default FF mode values [SSC-SPR-2779]
- (src/epframes_mod.f90): implemented call "OAL_addCommonAttributes()" [SCR-84]
- (DEPEND): needs `oal-3.87'

Version 8.46.1 - 2002-02-06 (MJF+UL)
------------------------------------
- (src/epframes_mod.f90): minor changes related to "OBT=-1" values [SOC-SPR-2231]
- (doc/epframes_description.tex): added error "NoGoodObtValues"

Version 8.46 - 2002-01-23 (MJF)
-------------------------------
- (src/epframes_mod.f90): minor changes related to messages
- (doc/epframes_description.tex): added a warning about the use of the default
parameter setting "withsrcrawy=N withsrccoords=N" in the case of non-default
pointings (source put intentionally off-axis); the occurence of this case
cannot be determined by the software, so it is in the user's responsiblity.
For TIMING and BURST modes offset pointings (or boresight changes) will lead
to incorrect absolute timing and wrong energy corrections if the proper
source coordinates are not supplied. This is irrelevant for all other modes.

Version 8.45 - 2002-01-22 (MJF)
-------------------------------
- (src/epframes_mod.f90): allow input of source position (decimal RA,DEC) and
output of corresponding RAWX,RAWY for all modes (if "withsrccoords=Y"), used
for time and energy corrections only for TIMING and BURST modes (as before)
- (src/epframes_mod.f90): new parameter `withsrcrawy' to enable switch-on of
TIMING and BURST source position parameter `srcposition' in cases when there
is no reliable attitude available but one knows where the source should be.
The default setting is "withsrccoords=N" and "withsrcrawy=N" which means
that the source pixel position shall be derived from RA_OBJ DEC_OBJ values
- (config/epframes.*): added new parameter "withsrcrawy"
- (doc/epframes_description.tex): extended and re-ordered parameter section,
details about the various HK-related messages and keywords

Version 8.44 - 2002-01-18 (MJF)
-------------------------------
- (src/epframes_mod.f90): reorganized a few messages and warnings, write several
additional keywords to exposure extension, obtain offset map parameters in a
more robust way

Version 8.43 - 2002-01-14 (MJF)
-------------------------------
- (src/epframes_mod.f90): warning 'singleBoresightBurst' if unusual RAWY range
occurs for BURST mode, warning 'doubleWindowTiming' if unusual RAWX range
occurs for TIMING mode. The window parameters may then be incorrect in ODF
and/or CCF, and consequently associated event flags. This is added to be
prepared for a change in the window sizes during the next SAS period
- (doc/epframes_description.tex): see above

Version 8.42 - 2002-01-11 (MJF)
-------------------------------
- (src/epframes_mod.f90): a few minor changes to make the MPE optimizer happy
- (src/epframes_mod.f90): initialize EXPOSURE extension columns (e.g. FRAMELIM)
before filling them to avoid memory corruption
closed SPRs:
- SSC-SPR-2566: FRAMELIM value incorrect [0140_0112230101_PNU014, low-gain mode, CCD 3]
- SSC-SPR-2577: FRAMELIM value incorrect [0219_0087940101_PNU002, short 26s, CCD 7]

Version 8.41 - 2001-12-21 (MJF)
-------------------------------
- (src/epframes_mod.f90): new parameter `showve' to show valid events in the
loops where the optimizer has problems to ease the debugging on the various
platforms, will be removed once it is obsolete (hopefully soon)
- (doc/epframes_description.tex): see above
- (config/epframes.*): see above

Version 8.40 - 2001-12-19 (MJF)
-------------------------------
- (src/epframes_mod.f90): write keyword EXPIDSTR to primary FITS header
- (src/epframes_mod.f90): write keywords REVOLUT and BPT_CODE to EVENTS header
- (src/epframes_mod.f90): moved CCD temperature parameter from task `epevents'
to epframes, only active when no HK file (PMH) found
- (doc/epframes_description.tex): added new parameter `hcettmpfpf' (well, that
IS the housekeeping parameter name) that is only active if PMH file is absent
- (config/epframes.*): see above

Version 8.39 - 2001-12-14 (MJF)
-------------------------------
- (src/epframes_mod.f90): implemented BadPixelTable coding, compare BPT code
from PAH file with ADUCONV.CCF for revolutions 293 and later (first implem.)
and if different issue new warning (BPTcode)
- (doc/epframes_description.tex): added new warning (BPTcode)
- (test/epframes_test_IM): use in-orbit data of Rev.146 for FF mode
- (DEPEND): needs `cal-3.129' and `eptestdata-0.3'

Version 8.38 - 2001-11-21 (MJF)
-------------------------------
- (src/epframes_mod.f90): adapt to new OAL state interface
- (DEPEND): needs `oal-3.81' (probably some older version were sufficient)

Version 8.37 - 2001-11-21 (MJF)
-------------------------------
- (src/epframes_mod.f90): if "automode=Y" then try to determine the nominal
frametime, the frame time parameter (F1294), and the chopper value (An_CHOP)
from the data itself which may be useful if no PMH or PAH file is available
(PMSFITS), default "N"
- (src/epframes_mod.f90): write bad-pixel-table related HK values as keyword
BPT_CODE into the events file (prepare for comparison with CCF)
- (src/epframes_mod.f90): rename OFFSETCO extension and its PHA column to
OFFSETS and OFFSETX (prepare for `evlistcomb-4.17')
- (doc/epframes_description.tex): rename offset column extension

Version 8.36 - 2001-09-14 (MJF)
-------------------------------
- (src/epframes_mod.f90): new warning (invalidODF) if (DATE-OBS == DATE-END)
or (DATE-END > last HK entry) as an attempt to avoid ODF SPRs on pn tasks
that are due to false ODFs, but e.g. the CAL may nevertheless crash later
- (doc/epframes_description.tex): added new warning "invalidODF" and a
subsection how to deal with those ODFs that should not have been delivered
in this form
closed SPR:
- SSC-SPR-2554: Problems with ODF in Rev 185 (ODS 10.2.3)

Version 8.35 - 2001-09-01 (MJF)
-------------------------------
- (src/epframes_mod.f90): write correct FRMTIME value (as integer), this avoids
repeated CAL warnings in subsequent tasks
- (src/epframes_mod.f90): stop with error if FRAME_TIME_PARAMETER is outside
valid range [0..15] instead of just giving a warning (see epframes-8.31)
- (doc/epframes_description.tex): added new error message "illegalIPPVvalue"
- (config/epframes.par): add parameter "automode" (not active yet)

Version 8.34 - 2001-08-17 (MJF)
-------------------------------
- (src/epframes_mod.f90): issue (new) warning "CCDlowGain" if a CCD has a
GAINCAME value of "LOW" instead of "HIGH"
- (src/epframes_mod.f90): check eFF/FF modes for consistency (if not issue
new warning "changedMode" and continue with correct value)
- (doc/epframes_description.tex): added new warnings

Version 8.33 - 2001-08-08 (MJF)
-------------------------------
- (src/epframes_mod.f90): removed obsolete section related to "maxwrong"
- (src/epframes_mod.f90): added 0026_0116160601_PNU002 to black-list
closed SPR:
- SSC-SPR-2504: error (maxwrong), More wrong events than maxwrong allows

Version 8.32 - 2001-07-17 (MJF)
-------------------------------
- (src/epframes_mod.f90): identify position of Low Gain Mode HK entries
- (src/epframes_mod.f90): if time reset at start of AUX1 file do not reject
the following entries anymore (only relevant for `releasetrack')
- (test/check_output_*.f90): issue better error messages for OPTIMIZATION=yes

Version 8.31 - 2001-06-14 (MJF)
-------------------------------
- (src/epframes_mod.f90): give warning if the IPPV "FRAME_TIME_PARAMETER"
has illegal values (the task may still crash as a consequence later)
- (src/epframes_mod.f90): give number of computed counting mode cycles as
real value instead of integer to better indicate incorrect cycle times
closed SPR:
- SSC-SPR-2423: Frame time mismatch

Version 8.30 - 2001-06-11 (MJF)
-------------------------------
- (src/epframes_mod.f90): make sure that too short PNAUX2 files cannot cause
out-of-range indices

Version 8.29 - 2001-06-08 (MJF)
-------------------------------
- (src/epframes_mod.f90): synchronize PNAUX2 NDISCLIN column with event file
EXPOSURE extension

Version 8.28 - 2001-06-08 (MJF)
-------------------------------
- (src/epframes_mod.f90): extract offset map HK parameters for later reference
- (src/epframes_mod.f90): correct TIMEDEL keyword for imaging modes:
FRMTIME_SECONDS*fc0 -> PSFTIME*1.E-3 [SSC-SPR-2417]

Version 8.27.2 - 2001-05-28 (MJF)
---------------------------------
- (src/epframes_mod.f90): do not release non-existing HK columns (PMS data)
- (test/epframes_test_*): call with setting "hkok=Y"

Version 8.27.1 - 2001-05-14 (MJF)
---------------------------------
- (src/epframes_mod.f90): write map description into output event map files
- (src/epframes_mod.f90): write offset columns to extension OFFSETCO
- (src/epframes_mod.f90): write specific warnings and error messages if
AUX file contains garbage values [SSC-SPR-2379]
- (doc/epframes_description.tex): updated warnings
closed SPR:
- SSC-SPR-2379: frame not found

Version 8.27 - 2001-04-10 (MJF)
-------------------------------
- (src/epframes_mod.f90): corrected column offset for CCD5/Col10 for "ccfok=N"
- (src/epframes_mod.f90): removed obsolete debug statement
- (test/*): split the test harness for the various instrument modes
- (epodf/*): files moved to new package `eptestdata'
- (DEPEND): depend on `eptestdata-0.2'

Version 8.26 - 2001-03-30 (MJF)
-------------------------------
- (src/epframes_mod.f90): explicit "default" in all "select case" clauses
- (src/epframes_mod.f90): new optional parameters `eventmapset' `witheventmap'
that will supersede the old optional `crmap' parameter [SSC-SPR-1723]
- (doc/epframes_description.tex): updated examples and parameters

Version 8.25.13 - 2001-03-15 (MJF)
----------------------------------
- (src/epframes_mod.f90): write number of time resets if more than one
- (doc/epframes_description.tex): added examples section

Version 8.25.12 - 2001-03-12 (MJF)
----------------------------------
- (src/epframes_mod.f90): write keyword FROFFMAP (number of frames used in
calculation of offset map, might be useful later in CTI correction)
- (doc/epframes_description.tex): completed warnings section
closed SPR:
- SSC-SPR-2278: Subscript of ARREXPTIME wrong [SPR already fixed in 8.25.9]

Version 8.25.11 - 2001-03-09 (MJF)
----------------------------------
- (src/epframes_mod.f90): write keyword GAINCAME (gain mode LOW or HIGH)
- (src/epframes_mod.f90): check whether last PNAUX2 entry has valid PNAUX1 time,
remove error PNAUX2cycleException as this case is not exceptional in pn data
closed SPR:
- SSC-SPR-2197: PNAUX2cycleException error

Version 8.25.10 - 2001-03-02 (MJF)
----------------------------------
- (src/epframes_mod.f90): new optional (temporary) parameter `ecntempqb1' to
mimick the HK parameter E_Cn_TEMPQB1 (ignored if "real" HK file found),
interface needed to prepare gain-temperature-corrections in `epevents',
default behaviour unchanged
- (src/epframes_mod.f90): corrected units in a few header keywords
- (doc/epframes_description.tex): added parameter `ecntempqb1'
- (config/epframes.*): added parameter `ecntempqb1'
- (test/epframes_test): one call with `ecntempqb1=19.115'

Version 8.25.9 - 2001-02-27 (MJF)
---------------------------------
- (src/epframes_mod.f90): activate ON_OFFSET_COLUMN and NEXT_TO_OFFSET_COLUMN
event attributes for default task calling sequence
- (src/epframes_mod.f90): made estimation of number of empty frames more robust
to prevent out-of-range failures [SSC-SPR-2230]
- (doc/epframes_description.tex): added a few missing CAL and OAL calls
- (doc/epframes_description.tex): moved event attributes to output section
closed SPRs:
- SSC-SPR-2104: out of memory problem
- SSC-SPR-2230: error within epchain [ARREXPTIME subscript out of range]
- SSC-SPR-2222: Subscript out of range for one CCD

Version 8.25.8 - 2000-12-13 (MJF)
---------------------------------
- (src/epframes_mod.f90): update keyword LIVETIME as required by task badpixfind
in epchain (do not subtract counting mode twice),
also update of call to CAL_offsetCorrect() to have
correct amplitudes for bright column search in
epchain [SSC-SPR-2147]
- (src/epframes_mod.f90): decrease use of memory (deallocate arrays earlier,
release columns earlier) [not sufficient to solve
SSC-SPR-2104 but works now for other problematic
cases]
closed SPR:
- SSC-SPR-2147: [epchain] New recommended parameter values for task badpixfind

Version 8.25.7 - 2000-11-23 (MJF)
---------------------------------
- (src/epframes_mod.f90): add call OAL_setState(), call OAL_selectFile()
before computing event times to reset OAL
closed SPR:
- SSC-SPR-2117: Event times shifted for long exposures

Version 8.25.6 - 2000-11-22 (MJF)
---------------------------------
- (src/epframes_mod.f90): improve time system related attribute comments
closed SPR:
- SSC-SPR-2102: better MJDREF attribute comment

Version 8.25.5 - 2000-11-17 (MJF)
---------------------------------
- (src/epframes_mod.f90): fix shift of GTIs and EXPOSUnn times [SSC-SPR-2044]

Version 8.25.4 - 2000-11-11 (MJF)
---------------------------------
- (src/epframes_mod.f90): handle exception if PNAUX2 extension is too small
closed SPR:
- SSC-SPR-2044: Strange behaviour of PN rate curve

Version 8.25.3 - 2000-11-09 (MJF)
---------------------------------
- (src/epframes_mod.f90): changed warning `wrongEvents' to plain message
- (src/epframes_mod.f90): fill `empty frames' into EXPOSURE extension
- (src/epframes_mod.f90): handle GTIs with help of AUX files
closed SPRs:
- SSC-SPR-1998: `wrongEvents' should not be a warning but just a message
- SSC-SPR-2000: Handling of `empty frames'
- SSC-SPR-2002: empty gti if no events

Version 8.25.2 - 2000-10-13 (MJF)
---------------------------------
- (src/epframes_mod.f90): removed "illegal character"
closed SPR:
- SSC-SPR-1984: compiler error due to "illegal character"

Version 8.25.1 - 2000-10-12 (MJF)
---------------------------------
- (src/epframes_mod.f90): check LOWER_THRESHOLD_Q*_CCD* consistency
closed SPR:
- SSC-SPR-1983: wrong IPPV for lower threshold

Version 8.25 - 2000-10-11 (MJF)
-------------------------------
- (src/epframes_mod.f90): change order of CAL_setstate() and output file access

Version 8.24 - 2000-10-10 (MJF)
-------------------------------
- (src/epframes_mod.f90): read correct FILTER IPPV

Version 8.23 - 2000-10-02 (MJF)
-------------------------------
- (src/epframes_mod.f90): adapt to new `caloaldefs.f90'

Version 8.22 - 2000-09-30 (MJF)
-------------------------------
- (src/epframes_mod.f90): adapt to new `caloaldefs.f90' [caloalutils-1.34]

Version 8.21 - 2000-09-29 (MJF)
-------------------------------
- (src/epframes_mod.f90): add warning if IPPV not found
- (doc/epframes_description.tex): added new warning "missingIPPV"

Version 8.20 - 2000-09-26 (MJF)
-------------------------------
- (src/epframes_mod.f90): read IPPVs from ODF summary file

Version 8.19 - 2000-09-12 (MJF)
-------------------------------
- (src/epframes_mod.f90): change TIMEDEL from column to keyword in EXPOSUnn
- (test/checkoutput.f90): update TIMEDEL existence check

Version 8.18 - 2000-09-10 (MJF)
-------------------------------
- (src/epframes_mod.f90): updated "setupbpx=nom3"

Version 8.17 - 2000-07-25 (MJF)
-------------------------------
- (src/epframes_mod.f90): change access of housekeeping files
- (epodf/): remove PEH files, update SUM file

Version 8.16 - 2000-07-21 (MJF)
-------------------------------
- (src/epframes_mod.f90): initialize FRACEXP, update TIMING fine-time correction

Version 8.15.8 - 2000-07-11 (GV/SOC)
--------------
+ (src/epframes_mod.f90) modified the way the summary file name is
inquired, as otherwise the state of the OAL is undefined.

Version 8.15.7 - 2000-07-05 (MJF)
---------------------------------
- (src/epframes_mod.f90): ensure initialization of "alloc"-variables

Version 8.15.6 - 2000-06-30 (MJF)
---------------------------------
- (doc/epframes_description.tex): corrected typo in \block{}

closed SPR:
- SSC-SPR-1897: wrong \block in doc

Version 8.15.5 - 2000-06-26 (MJF)
---------------------------------
- (doc/epframes_description.tex): \param{} -> \tt{} for outdated parameters etc.

Version 8.15.4 - 2000-06-19 (MJF)
---------------------------------
- (src/epframes_mod.f90): change determination of lengths of file names

Version 8.15.3 - 2000-06-10 (MJF)
---------------------------------
- clarified time related attributes in code, now compliant with ICDs,
added more user friendly keywords EXPSTART,EXPSTOP,OBSSTART,OBSSTOP,
added TIMEREF, TASSIGN, CLOCKAPP to primary header
- added `SSC-SPR-' to all SPR numbers in `ChangeLog'

closed SPR:
- SSC-SPR-1718: Output has DATE_OBS, DATE_END, DATE-OBS, DATE-END keyword
(and the values differ)

Version 8.15.2 - 2000-06-08 (MJF)
---------------------------------
- check whether the required extensions are in the relevant file if this file
exists (cf. SPR-1716)
- corrected a couple of typos in the documentation
- make all time attributes the same in all extensions (required by SPR-1718),
corresponding names still under discussion

closed SPR:
- SSC-SPR-1722: showpah parameter not found in task description:
was included but contained typo (`showpmh', therefore not `grep'ped)

Version 8.15.1 - 2000-06-02 (MJF)
---------------------------------
- check existence of CCX, AUX, PMH, and PAH files via new OAL function
`OAL_hasAssociatedSet()' before trying to access the files

closed SPR:
- SSC-SPR-1716: task fails if CCX file belongs to different exposure:
use new function `OAL_hasAssociatedSet()' to check existence of file

Version 8.15 - 2000-05-27 (MJF)
-------------------------------
- warning if no PNAUX2 extension in AUX file
- separate handling of PNAUX1 and PNAUX2 completely
- change initializations of several variables
- write keyword TRESET (reset time to be added to PN times)
- reduce Change History in LaTeX file

Version 8.14 - 2000-05-25 (MJF)
-------------------------------
- updated documentation: section input/output files
- updated list of ODFs with erroneous PHA values
- extended check for backjump vs. time reset
- changed default for parameter `F1294' from 3 to 0, use for `eFF' processing
- introduce again temporary EXPOSURE keyword (cf version 8.12)
- extended handling for parameter `crmap=1' or `crmap=2'
- new optional parameters to control verbosity of AUX, CCX, HK file handling

Version 8.13 - 2000-05-09 (MJF)
-------------------------------
- check for small backjumps in FTCOARSE/FTFINE and FRAME/CYCLE
- deallocate array AUX2CYCLE
- updated `epframes.info'

Version 8.12 - 2000-05-08 (MJF)
-------------------------------
- write keyword `ONTIME', remove temporary EXPOSURE keyword (cf version 8.7)
- subtract sum of `Counting Mode intervals' and write keyword LIVETIME
- change event attribute `REJECTED_BY_GATTI' to `MIP_ASSOCIATED'
- take care of erroneous PHA values in some ODFs
- updated DEPEND file

Version 8.11.2 - 2000-04-25 (GV/SOC)
--------------
+ change column names (ftcoarse/ftfine) in the testodf (PMH).
+ (epframes_test): change ODF(...) to OAL(...)
+ (DEPEND) updated

Version 8.11.1 - 2000-04-17 (GV/SOC)
--------------
+ change column names (ftcoarse/ftfine) in the testodf (PEH).

Version 8.10.1 - 2000-04-14 (UL)
--------------------------------
- brought in line with oal-3.50 (also updated DEPEND)
- in epof/*PEH*|*PMH*: replaced FTCOARSE/FTFINE with real column names
F1030/FU036
- in test/epframes_test: changed all 'odf(...)' to 'oal(...)'

Version 8.11 - 2000-04-13 (MJF)
-------------------------------
- changed default for parameter `mipmethod' (com -> onboard)
- changed default for parameter `aneamipsel' (1 -> 2)
- extend `mipmethod=onboard' for `aneamipsel>32'
- extended `epframes.lyt', updated documentation about MIP rejection

Version 8.10 - 2000-04-13 (MJF)
-------------------------------
- added `epframes.info' to `config' subdirectory and Makefile
- moved offset correction vector after frame processing
- several new temporary HK parameters/switches (not for general use)
- improved/reduced use of message/warning/error
- added `ONBOARD' mip rejection mode

closed SPRs:
- SSC-SPR-1415: Timing mode behaviour:
- SSC-SPR-1416: srcposition parameter:
implemented TIMING formula according to EPIC-EST-OP-002 Sect.8.3.1 (Sep.'99)
implemented BURST formula according to EPIC-EST-OP-002 Sect.8.3.2 (Sep.'99)
- SSC-SPR-1632: 'Subscript out of range' with SAS_VERBOSITY = 10:
corrected loop index

Version 8.9.1 - 2000-03-31 (MJF)
--------------------------------
- included check for FTCOARSE = FFFF and simultaneous error in FRAME number

Version 8.9 - 2000-03-31 (MJF)
-------------------------------
- prepare task to deal with HK data
- new optional parameters f1294, f1052, anchop (fake missing HK information)
- discarded frames with FTCOARSE = FFFF in PNAUX1 extension of auxiliary file
- change order of subroutine calls, e.g. create output file after frame loop
- warning if event times are unreasonable
- included event fine time correction for TIMING and BURST modi
according to EPIC-EST-OP-002 Sects.8.3.1 and 8.3.2 instead of CAL call

Version 8.8 - 2000-03-22 (MJF)
-------------------------------
closed SPRs:
- SSC-SPR-1594: Inappropriate CONTENT keyword:
added words `INTERMEDIATE' and `SINGLE CCD' to previous CONTENT values
- SSC-SPR-1595: Missing rejection flag (XMMEA_EP):
XMMEA_EP is now set via `call setEpnRejectionMask(outccd)'

Version 8.7 - 2000-03-10 (MJF)
-------------------------------
- write preliminary EXPOSURE keyword (will be removed again in later version)
- write also DATE_OBS (DATE-OBS is sometimes not liked by non-SAS utils)
- adopt new ChangeLog header line style

Version 8.6 (07.03.00)
-----------------------
- new optional parameter "mipdist" for cosmic ray analysis
- write several attributes also in case of empty extensions

Version 8.5 (23.02.00)
-----------------------
- replace explicit use of EPN mode numbers by `caloaldefs'
- new parameter "crmap" for cosmic ray CCD map
- fixed config-Makefile

Version 8.4 (18.02.00)
-----------------------
- added CCD-submode attribute (CCDSMODE) to exposure extension
- corrected burst mode window nominal value for NYDIM (200 -> 199 -> 179)
- empty EXPOSURE extension: check for any events

Version 8.3 (17.02.00)
-----------------------
- added window size check against nominal values

Version 8.2 (16.02.00)
-----------------------
- fixed "no events case" for EXPOSURE extension

Version 8.1 (15.02.00)
-----------------------
- new parameter "mipthreshold", updated EXPOSURE extension

Version 8.0 (02.02.00)
-----------------------
- reduced allocation of memory to handle large data sets
- changed WINDOWX0/Y0/DX/DY keywords to account for different modes
(and e.g. bottom left corner at (1,2) for full frame IMAGING)
- created a new attribute 'SRCPOS' to propagate srcposition parameter
on to e.g. epevents
- creates additional exposure extension columns NDSCLIN# (#1..4)
to store per frame info on columns containing MIPs

closed SPRs:
- SSC-SPR-1444: Keywords not written:
set TLMIN=0 and TLMAX=4095 for PHA column

Version 7.0 (17.01.00)
-----------------------
- updated epodf test ODF for unsigned columns
- removed setting of attribute DETNAM as this is not applicable for EPN
- changed 'bad' to 'wrong' in documentation and code to avoid confusion
with bad pixels
- therefore also renaming of parameter 'badpixlimit' to 'wrongpixlimit'
- removed EXPOSURE and added TELAPSE = TSTOP - TSTART attributes (following
proposal by JOB, 17.12.99)
- added reference to paper by M. Kuster which describes the conversion
from FRAME to event times

closed SPRs:
- SSC-SPR-1403: Bit code for flags
has been removed from the documentation
- SSC-SPR-1404: Test ODF directory:
now has different CCD/exposure numbers for imaging, timing and burst mode data
- SSC-SPR-1405: badpixlimit is mandatory:
changed to optional in the epframes.par file
- SSC-SPR-1406: Timing keywords in GTI file:
added TIMESYS, TIMEUNIT and MJDREF to STDGTI extension and event list
extension
- SSC-SPR-1407: RAWX is not read as unsigned:
RAWX is now read as unsigned
- SSC-SPR-1408: TSTART and TSTOP:
computation has been changed to pick up start time of first frame
and stop time of last frame
- SSC-SPR-1409: epframes takes too long:
placed vector assignments outside of the 'per frame' loop
- SSC-SPR-1413: Warnings depend on verbosity level:
this has been fixed
- SSC-SPR-1414: FRMTIME has no unit:
changed description of FRMTIME attributes in epodf example ODF
- SSC-SPR-1417: srcposition in Burst mode:
a warning is given if srcposition < 181 for BURST mode data

Version 6.1 (20.12.99) - UL
----------------------
- in `epodf/0001_0000000000_PNS00101IME.FIT' changed values of attributes
QUADRANT/CCDID to 0/0 to make it consistent with CCDID in set name

Version 6.0 (30.11.99)
-----------------------
- new parameter srcposition to specify source position for TIMING/BURST mode
- included CAL_correctTime for mode dependent fine time correction
- updated creation of exposure extension
- changed setting of EXP_ID attribute from 3 to 13 digits (including OBS_ID)
to be in agreement with ODF-ICD
- introduced new attribute DATASUBMODE to describe different readout submodes
- changed SAS_ODFDIR to SAS_ODF in test harness

Version 5.9 (12.10.99)
-----------------------
closed SPRs:
- SSC-SPR-1276: noEvents warning should be message
- SSC-SPR-1252: test harness fails on linux

Version 5.8 (24.09.99)
-----------------------
- minor changes in test/checkoutput.f90
- fixed test harness exit status

Version 5.7 (18.09.99)
-----------------------
- doc updated for new LaTeX macros

Version 5.6 (06.09.99)
-----------------------
- creates TSTART, TSTOP, TIMEUNIT and TIMESYS attributes
(adopting the convention proposed by Dean Hinshaw, namely that TSTART and
TSTOP are the smallest and largest times of the TIME column of the event
list, respectively)
- writes TLMIN, TLMAX attributes for RAWX/Y columns

Version 5.5 (01.09.99)
-----------------------
- uses the OAL to inquire the number of exposures for a particular mode

closed SPR:
- SSC-SPR-1195: Problem with ODF_DIR unset

Version 5.4 (23.08.99)
-----------------------
- new epodf test directory:
now contains TIMING and BURST mode data with bad events
all ODF constituents have been removed which are not needed for PN tests
- now fills in TIME, TIMEDEL and FRACEXP columns in exposure extension
- changed the fine time calculation in case of TIMING and BURST mode data

closed SPR:
- SSC-SPR-1194: BadPixLim: the task does not do a usefull job

Version 5.3 (10.08.99)
-----------------------
- new test harness includes event file with no events
- event attributes stored as keywords

closed SPRs:
- SSC-SPR-1173: cannot handle event file with no event
- SSC-SPR-1174: wrong use of fatal

Version 5.2 (03.08.99)
-----------------------
- now adds RA_NOM and DEC_NOM attributes

closed SPR:
- SSC-SPR-1151: Does not populate (RA/DEC)_NOM from ODF

Version 5.1 (02.08.99)
-----------------------
- changed warning messages, added statistics about bad events

closed SPR:
- SSC-SPR-1138: Epchain gives repeated warnings...

Version 5.0 (08.06.99)
-----------------------
- makes use of event attributes (GV/XMM/1999-01)
- brought in line with cal v3.0
- removed offsetfile parameter and offset FITS file

closed SPR:
- SSC-SPR-0990: ad hoc calibration file

Version 4.6 (31.05.99)
-----------------------
- fixed a bug related to SAS_VERBOSITY setting

Version 4.5 (28.05.99)
-----------------------
- fixed OBS_ID attribute in primary and extension header

Version 4.4 (25.05.99)
-----------------------
closed SPRs:
- SSC-SPR-0995: cannot handle event file in other directory

open SPRs:
- SSC-SPR-0990: ad hoc calibration file

Version 4.3 (06.05.99)
-----------------------
- changed place of 'use oal' command to fix segmentation fault under solaris
- use sas provided latex commands

Version 4.2 (03.05.99)
-----------------------
- updated for processing of TIMING and BURST mode ODF data sets
- comes with a new (epodf4) ODF example file which includes
IMAGING and TIMING mode data

Version 4.1 (28.04.99)
-----------------------
- increased loop index to allow for processing of testodf/scisimlong

Version 4.0 (20.04.99)
-----------------------
- changed parameter names according to GV/XMM/1992-02
- changed subroutine 'offset' to 'corr_offset' to avoid redeclaration error

Version 3.3 (23.03.99)
-----------------------
- fixes a bug in the testing and writing of the RAWY column

Version 3.2 (22.03.99)
-----------------------
- fixes a bug in the writing of the OBS_ID keyword
- fatal error if input events list is empty

Version 3.1 (19.03.99)
-----------------------
- updated creation of mandatory keywords for PPS products
- now deallocates ixx d_rawYCol iyy for epproc

Version 3.0 (5.03.99)
-----------------------
- removed odfdir parameter (covered by taskmain functionality)
- new odf example data set in epodf subdirectory
- introduced string parameter 'offsetfile'
It points towards a data set listing onboard PHA offsets per CCD
and column. Offsets are needed to reconstruct the original raw energie
values and should become part of the CCF
- Changed CCDID column to CCDNR column (see DCP for SSC Data Products ICD)
- FLAG column changed from Int16 to Int32
- new check if events are ordered by FRAME, RAWY, RAWX (TBC)
- changed GTI extension name to STDGTIxx where xx is the overall CCD number
(01 - 12)
- CCD modes extension created - as part of the EXPOSURE extension (TBC)
- GUI layout file config/epframes.lyt created

Version 2.0 (23.11.98)
-----------------------
removed redundant parameters datamode, expnr, ccdnr

closed SPRs:
- SSC-SPR-0875: Task requires CCD & exposure number as parameter
- SSC-SPR-0866: should not write messages with (*,*)
- SSC-SPR-0714: Reaction to wrong input files - see SPR 477 on oal v2.2
- SSC-SPR-0700: The parameter datamode seems redundant

Version 1.9 (30.10.98)
----------------------
- epframes now adds 1 to the X and Y raw coordinates from the ODF
to create RAWX and RAWY for the PPS in the range 1-64 and 1-200
- overall CCD numbering is now in agreement with CAL/SciSim standard
- the ODF summary file has been updated to be in agreement with oal-2.3
- new use of datamode parameter: 1=Imaging, 2=Timing, 3=Burst
- new input parameter 'badlimit' to trigger warning if too many
events are bad

closed SPRs:

- SSC-SPR-0698: documentation error for RAWX and RAWY
- SSC-SPR-0699: Error "too many bad events" - handled by 'badlimit' parameter
- SSC-SPR-0701: fault on parameters missing
- SSC-SPR-0704: Problem with the interval between frames

open SPRs:

- SSC-SPR-0700: The parameter datamode seems redundant
- SSC-SPR-0714: Reaction to wrong input files

Version 1.8
----------------------
- Code updated to be in agreement with F90 coding standards
- odf example now includes AUX and PMH Files in correct format
- copyAttribute replaced by setAttributes
- in agreement with new error interface v1.9
- uses new OAL_proposalInfo to add more standard primary header keywords

closed SPRs:

- SSC-SPR-0574: CAL/OAL error messages - epframes now in agreement with oal v2.2

Version 1.7
----------------------
- parameter file fixes

Version 1.6
----------------------
- new version to account for OAL v2.0 routine/type name changes
- prlev parameter replaced by global VERBOSITY variable

Version 1.5
----------------------
closed SPRs:

- SSC-SPR-0506: mssllib is missing from DEPEND

Version 1.4
----------------------
added new parameters:
'datamode', 'expnr' - to allow for selection of different readout modes (up
to now only Imaging mode is supported) and exposures
'prlev' - to switch between different levels of task verbosity
'infile' - to make use of the new oal/cal v1.2 functionality to get a valid
ODF file name

Change in GTI calculation: startTime is outtimeCol(i) - halfdt
stopTime is outtimeCol(j) + halfdt
where halfdt = 0.5 * FRMTIME

Closed SPRs:

- SSC-SPR-0353: use type f for file names
- SSC-SPR-0354: remove memdal from USEDLIBS
- SSC-SPR-0355: do not use goto and labels
- SSC-SPR-0142: Test harnesses are base tests
- SSC-SPR-0012: GTI output
- SSC-SPR-0011: Behaviour for wrong CCD number


Version 1.3
----------------------

ChangeLog added
DEPEND edited

Closed SPRs:

- SSC-SPR-0140: file permissions fixed
- SSC-SPR-0141: config/epframes.msg and reference in config/Makefile removed
- SSC-SPR-0143: call error now used instead of 'stop'
- SSC-SPR-0144: source code improved (to implement nested loops)
- SSC-SPR-0145: epframes.par file fixed
- SSC-SPR-0146: make test passed on SSC system (ermintrude)

Version 1.2
----------------------------

- Original version submitted to the SOC