Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/5.4.1/doc/omfchain/node10.html
Дата изменения: Fri Jan 10 23:33:22 2003
Дата индексирования: Sat Dec 22 10:29:21 2007
Кодировка:

XMM-Newton Science Analysis System


omfchain (omfchain-1.22.13) [xmmsas_20030110_1802-5.4.1]

Meta Index / Home Page

Input Files

Before attempting to use the omfchain, first run the odfingest SAS task. This will create a *SUM.SAS file from *SUM.ASC file that comes with the ODF. It is better to keep this in the same directory as the ODF. With this, and the other files listed below, which should already be in the ODF, it should be possible to process the OM Fast mode event list files.

1. rrrr_iiiiiiiiii_SCX00000NPH.FIT - OM Non-periodic Housekeeping file
2. rrrr_iiiiiiiiii_SCX00000PEH.FIT - OM Periodic Housekeeping file
3. rrrr_iiiiiiiiii_SCX00000FFX.FIT - PPS OSW Flatfield Image
4. rrrr_iiiiiiiiii_SCX00000TCS.FIT - Spacecraft time correlation file
5. rrrr_iiiiiiiiii_SCX00000ATS.FIT - Spacecraft attitude history file

For each exposure to be processed there are also files:

1. rrrr_iiiiiiiiii_OMSeeewwTHX.FIT - OM Tracking History Data Auxiliary file
2. rrrr_iiiiiiiiii_OMSeeewwFAE.FIT - OM Fast Mode Event List file
3. rrrr_iiiiiiiiii_OMSeeewwWDX.FIT - OM Priority Window Data Auxiliary file

where rrrr is the 4 digit XMM rev. number, iiiiiiiiii is the 10 digit observation id, eee is the exposure number (e.g. 006 etc.), and ww is the window identifier (00 or 01).

If THX-file are not present, no tracking corrections can be applied but this is often not critical since XMM's tracking appears to be good to around 1 arc-second. If THX files are absent, a dummy file is created by omprep.

Often a raw image FIT-file corresponding to the OM Fast mode window is also present in the input data set, as well as a larger image corresponding to the OM imaging window for the same exposure (rrrr_iiiiiiiiii_OMSeeewwIMI.FIT), but these files are not used for the Fast mode chain.