Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/6.1.0/doc/emchain/ChangeLog Дата изменения: Mon Oct 11 18:32:21 2004 Дата индексирования: Sat Dec 22 07:40:24 2007 Кодировка: Поисковые слова: http astrokuban.info astrokuban

ChangeLog for emchain
=====================

Open SPRs:
----------
None.

Version 11.4.7 - 2004-10-11 (JB)
--------------
- Fix test harness to accommodate change in number of CCF files.

Version 11.4.6 - 2004-07-08 (JB)
--------------
- Corrects logic hole when startfromodf=N.

Version 11.4.5 - 2004-04-14 (JB)
--------------
- Addresses SPR 3285 (emchain crashes with applyflaregti=Y, reissued).

Version 11.4.4 - 2004-04-02 (JB)
--------------
- Addresses SPR 3284 (emchain crashes with applyflaregti=Y).

Version 11.4.3 - 2004-03-17 (JB)
--------------
- Parameter lowenerbadpix was inoperant.

Version 11.4.2 - 2004-02-06 (JB)
--------------
- Add fromccf=N to intermediate call to ebadpixupdate to avoid failures
in Timing mode when SUBMODE is not set.
- Remove badpixfindalgo=NO from test harness call to test the above.

Version 11.4.1 - 2004-01-13 (JB)
--------------
- Change [] defining extensions in ftools to + (was not correctly
interpreted by some shells).

Version 11.4 - 2003-12-05 (JB)
------------
- Adapted test harness to new number of calibration files.

Version 11.3 - 2003-11-28 (JB)
------------
- Keep all columns for Timing mode when fulloutput=Y.

Version 11.2 - 2003-11-17 (JB)
------------
- Change rejectionflag default to weed out events ON_BADOFFSET.

Version 11.1 - 2003-11-03 (JB)
------------
- Adapted test harness to new number of calibration files.

Version 11.0 - 2003-10-14 (JB)
------------
- Propagate OFFSETS extension to merged events list.

Version 10.9 - 2003-08-26 (JB)
------------
- Accept lists in parameters transmitted to component tasks.
- Reinstate withemenergy (emenergy was always called).

Version 10.8 - 2003-06-27 (JB)
------------
- Upgrade to ebadpixupdate 1.4.

Version 10.7 - 2003-05-14 (JB)
------------
- Change getotherbadpix from N to Y in call to badpix when badpixfindalgo=em|ep

Version 10.6 - 2003-04-25 (JB)
------------
- Bug in flare GTI name introduced in 10.4.

Version 10.5 - 2003-04-22 (JB)
------------
- New lowenerbadpix parameter to look specifically for bright pixels < 500 eV.
- Calls ebadpixupdate to deal with very strong bright pixels.

Version 10.4 - 2003-04-15 (JB)
------------
- Fixed SPR 3096 (fkeyprint call).
- New FRACEXP column in flare screening timeseries.
- Added globalflare parameter (default) to build single flare screening
timeseries for all MOS exposures.
- Makes use of FLICKERING flag.
- Includes CCD 1 in flare background time series (except Timing).
- Accepts gzipped ODF files.
- Writes messages to STDOUT, following new SAS policy.
- Use supertabular for ChangeLog section in doc.

Version 10.3 - 2002-09-17 (JB)
------------
- Added test for slew data to avoid needless warning.
- Editorial improvements.

Version 10.2 - 2002-08-29 (JB)
------------
- Changed test harness to accommodate emevents 7.1.

Version 10.1 - 2002-08-02 (JB)
------------
- Changed DEPEND for new major version of emframes, emevents and emenergy.

Version 10.0 - 2002-07-26 (JB)
------------
- Use more specific intermediate file names containing 'mos' (SPR 2895).
- Add requirement on perl 5.005.
- Modify getMode to accommodate EDUMODE=3 in Timing mode.
- Make embadpixfind default (as in PPS), remove withbadpixfind parameter.
- Change keeprejected parameter into rejectbadevents (opposite meaning).
- Add rejectionflag and addvigweight parameters.

Version 9.2 - 2002-05-27 (JB)
-----------
- Clarify warnings in code and doc.

Version 9.1 - 2002-05-15 (JB)
-----------
- Upgrade parameter file to param 2.0.

Version 9.0 - 2002-05-03 (JB)
-----------
- Add filterhk, filteratt and atttol parameters for GTI definition.
- Remove HKGTI.FIT entry in ODF dir.
- Move BAD.FIT entry from ODF dir to current dir.
- Move HKGTI.FIT and BAD.FIT files from emsaplib/emodf to emchain/test.
- Add stopafterbadpixfind parameter for investigations.
- Remove 'errors' file on successful output.

Version 8.4.1 - 2002-04-08 (JB)
-------------
- Correct bug on testing flare screening GTI length introduced in 8.1.

Version 8.4 - 2002-03-01 (JB)
-----------
- Call badpix with windowfilter=Y.
- Make test harness less sensitive to precision on TIME.

Version 8.3 - 2002-01-29 (JB)
-----------
- Does not process low gain data unless processlowgain is set.

Version 8.2 - 2002-01-22 (JB)
-----------
- Doc corrected for flare screening.
- Accepts instrument specifications like mos1, emos1 (not only m1).

Version 8.1 - 2002-01-11 (JB)
-----------
- Add CONTENT keyword to flare background timeseries.
- Change background timeseries to /ks/arcmin2.

Version 8.0 - 2002-01-10 (JB)
-----------
- Generate flare background timeseries in RATE format.
- flaremaxcounts becomes flaremaxrate.
- Reject GTIs only one flaretimebin long.
- exposure, instrument become exposures, instruments.
- Make use of new EXPIDSTR keyword.
- Support propagation of parameters to constituent tasks.
- Gently inform of deprecated parameters.

Version 7.5 - 2001-11-26 (JB)
-----------
- Adapted to evselect 3.43 (updateexposure=N on single CCD events lists).
- Changed name of flare background timeseries to follow PPS.
- Write specific error message after each error in task.

Version 7.4 - 2001-11-22 (JBa)
------------
- (doc/emchain_description.tex): fixed documentation

Version 7.3.1 - 2001-10-29 (JB)
-------------
- Adapted test harness to cal 3.121 (test).

Version 7.3 - 2001-10-09 (JB)
-----------
- Set default for badpixfindalgo to EM (like in PPS products).
- Randomize TIME by default (like in PPS products) in Imaging modes.

Version 7.2.2 - 2001-07-19 (JB)
-------------
- Change test harness to accommodate cal 3.117.

Version 7.2.1 - 2001-07-19 (JB)
-------------
- Remove check on FILTER in test harness.

Version 7.2 - 2001-07-02 (JB)
-----------
- Avoid evselect error when XMMEA_22 does not exist.
- Check on too small flare GTI (< 10%).

Version 7.1 - 2001-05-29 (JB)
-----------
- Fixed SPR 2384 (emchain does not support -h).
- Also supports other standard options.
- Changed doc to avoid mixing parameters in HTML doc.

Version 7.0 - 2001-05-11 (JB)
-----------
- Move bad pixel search to after flare GTI filtering.
- Add badpixfindalgo, stoponerror, startfromodf, clobber,
withemevents, withemenergy parameters for better flexibility.
- Improved documentation.

Version 6.5 - 2001-04-24 (JB)
-----------
- Add useccfdark parameter for emenergy 6.1.
- Correct bug in doc (Parameters section).

Version 6.4 - 2001-03-22 (JB)
-----------
- Add srcra and srcdec parameters for emframes 4.5 (Timing mode).

Version 6.3 - 2001-03-08 (JB)
-----------
- set VISIBLE to no (config/emchain.info).
- change tests on FLAG to include EVATT_UNDERSHOOT (0x40000000).
- Adapt to emevents 6.0 and emenergy 6.0.
- Add emenergy to intermediate loop before badpixfind.

Version 6.2 - 2001-02-22 (JB)
-----------
- Call emevents with rejectrows=Y in Timing mode.
- Adapt test harness to cal 3.100 (bad pixels in Timing mode).

Version 6.1 - 2001-02-19 (JB)
-----------
- Adapt test harness to emevents 5.7.

Version 6.0.1 - 2001-02-08 (JB)
-------------
- Correct bug in Change History (doc/emchain_description.doc).

Version 6.0 - 2001-01-16 (JB)
-----------
- Replace ccd parameter by ccds (list).
- Add runccdloop, runevlistcomb, applyccdgti and makeflaregti parameters
(default is yes).
- Add keepintermediate and applyflaregti parameters (default is no).
- Change logic to accommodate 2-node event reconstruction and
improve modularity.

Version 5.2.2 - 2000-11-21 (JB)
-------------
- Keep as output files timeseries used for flare filtering (src/emchain).
- Recovered compatibility with Ftools 4.2 (src/emchain).
- Updated test harness to emsaplib 2.1.2

Version 5.2.1 - 2000-11-18 (UL)
-------------
- updated test reference data sets
test/struct.ref
test/merged.ref.gz
test/timstruct.ref
test/evtime.ref
after change of Xmm::missionReferenceTime (caloalutil-1.36.3/oal-3.58.8)

Version 5.2 - 2000-10-31 (JB)
-----------
- Call emevents with flagtruncatede1=Y in Timing mode (src/emchain).
- Write CONTENT keyword (src/emchain).

Version 5.1.2 - 2000-10-27 (JB)
-------------
- Fixed SPR 2009 (Wrong names for event list files) (src/emchain).

Version 5.1.1 - 2000-10-19 (JB)
-------------
- Use attcalc default for attitudelabel and refpointlabel (src/emchain).

Version 5.1 - 2000-10-09 (JB)
------------
- Modify default value of flaremaxcounts.
- Add cleandss=Y to final evselect call in test harness.

Version 5.0 - 2000-10-05 (JB)
------------
- Keep truncated events in output file (src/emchain).
- Build light curve for flare rejection from truncated events (src/emchain).
- Writes CALINDEX extension to output files (src/emchain).

Version 4.15 - 2000-10-02 (JB)
------------
- Allows automatic bad pixels detection using withbadpixfind (src/emchain).

Version 4.14 - 2000-09-29 (JB)
------------
- Updated test harness for new OAL (test/emchain_test).
- Updated to emevents 5.0 (src/emchain).
- Changed suffix of graphics file from ps to eps (doc/imaging0.ps).

Version 4.13 - 2000-07-05 (JB)
------------
- Always call badpix with getuplnkbadpix=Y even when a *BAD.FIT file
is present (src/emchain).
- Looks for emodf test directory under lib/testodf (test/emchain_test).

Version 4.12.2 - 2000-06-28 (JB)
--------------
- Fix SPR 1879 (Disagreement in parameters).
Modified config/emchain.par, config/emchain.lyt.
- No exposure computation on unmerged event files (src/emchain).

Version 4.12.1 - 2000-06-23 (JB)
--------------
- The events out of the FOV were being rejected anyway (src/emchain).

Version 4.12 - 2000-06-14 (JB)
------------
- Do not reject events out of the field of view.
- Build good time intervals for flare rejection.

Version 4.11.1 - 2000-05-31 (JB)
--------------
- Correct bug in Perl logic when withattcalc is set explicitly (src/emchain).
- Use dsslib with #XMMEA_EM (src/emchain).

Version 4.11 - 2000-05-29 (GV/SOC)
------------
- (test/struct.ref) updated, because the order of the extensions
in struct.lst had changed.

Version 4.10 - 2000-05-29 (JB)
------------
- Update DEPEND file.

Version 4.9 - 2000-05-28 (JB)
-----------
- Adapted to new default parameters of evselect.
- Uses outset parameter of badpix.
- Uses gtimerge instead of mgtime.
- Updated output file names to Data Products ICD 2.1.
- keeprejected=N is now default.

Version 4.8 - 2000-04-09 (JB)
-----------
- Adapt keeprejected option to new meaning of XMMEA_EM.

Version 4.7 - 2000-04-28 (JB)
-----------
- Correct bug in parameter input.
- Adapt test harness to new event attribute codes.

Version 4.6 - 2000-04-20 (JB)
-----------
- Fixed SPR 1629 (Test harness fails under FTOOLS v5.0).

Version 4.5 - 2000-04-06 (JB)
-----------
- Added writedss and updateexposure to final call to evselect.
- Do not analyse events when emframes ends in error.
- Added parameters fulloutput, keeprejected and randomize.

Version 4.4 - 2000-04-05 (JB)
-----------
- Added -w 10 option to all SAS calls.
- Changed test harness following CAL/CCF and emenergy evolution.

Version 4.3 - 2000-02-29 (JB)
-----------
- Improved -v answer and removed rogue output when verbosity is set to none.

Version 4.2 - 08-02-2000
-----------
- Improved -v answer when emchain is a local version.

Version 4.1 - 28-01-2000
-----------
- Add withatthkgen, withbadpix and withattcalc parameters.
- Correct bug preventing run for data obtained with node 1 only.
- Tests HK GTI file for MJDREF in mgtime.

Version 4.0 - 20-12-1999
-----------
- Changed output file names to conform to the SSC DP ICD.
- Aligns and merges the HK GTI with the CCD GTIs.
- Removed the logic for energy combination (now in calmosalgo).

Version 3.1 - 30-11-1999
-----------
- Modified test harness due to new behaviour of emframes and emenergy.

Version 3.0 - 15-11-1999
-----------
- Added instrument, exposure, ccd optional parameters.
- Uses new emsaplib library.
- Changed SAS_ODFDIR into SAS_ODF, odfdir into odf.

Version 2.9 - 03-11-1999
-----------
- Modified test harness due to new behaviour of emevents.

Version 2.8 - 19-10-1999
-----------
- Change test harness to adapt to new gain values.

Version 2.7 - 07-10-1999
-----------
- Upgraded for emevents 3.7, emenergy 3.5 and evlistcomb 4.0.
- Treats mono and bipixels differently from larger events in emenergy.
- Sends a list of files for offsets to emevents.
- Global error status.
- Supports '-v' argument.
- Doc updated to sas 1.155.

Version 2.6 - 03-09-1999
-----------
- Writes all messages to STDERR.
- Less sensitive test harness.

Version 2.5 - 01-09-1999
-----------
- Upgraded for attcalc 4.8, calling atthkgen.
- Upgraded for emframes 3.5 (calls directly the auxiliary file).
- Better error handling.
- Writes version of constituent tasks in verbose mode.

Version 2.4 - 13-08-1999
-----------
- Added refpointlabel parameter for attcalc.
- May use SAS_ODFDIR directly instead of odfdir parameter.
- Better error handling.

Version 2.3 - 05-08-1999
-----------
- Upgraded for evselect 3.0.

Version 2.2 - 28-07-1999
-----------
- Closed SPR 1122 (perl may complain: uninitialized variable SAS_VERBOSITY)

Version 2.1 - 11-06-1999
-----------
- Includes test harness for Reduced Imaging mode.
- Keeps silent if SAS_VERBOSITY is 0 or not set.
- Upgraded for evselect 2.0.

Version 2.0 - 31-05-1999
-----------
- Closed SPR 879 (Non-compliance with the DP ICD).
- Closed SPR 883 (Behaviour when no i/p files are available).
- Better coding practise.
- New parameter names.
- Uses the emevents/emodf directory for testing.
- Includes test harness for Timing mode.
- Includes a parameter layout file.

Version 1.9 - 11-05-1999
-----------
- Upgraded to be compatible with badpix 2.0, attcalc 4.0,
emframes 3.0, emevents 3.0, emenergy 3.0, evlistcomb 3.0.
- Uses the new presentation for columns, keywords, ... in the doc.
- Uses a more recent set of test data.

Version 1.8 - 09-04-1999
-----------
- Fixed SPR 980 (zcat in test harness).

Version 1.7 - 31-03-1999
-----------
- Removed unnecessaries dependencies in DEPEND.

Version 1.6 - 26-03-1999
-----------
- Does not reject bad events in final call to evselect any more.
- CCDID --> CCDNR in output.
- Closed SPR 878 (ODF non-compliance).
- Closed SPRs 880, 881, 882 after evolution of the constitutive tasks.
- ROWOFFST and COLOFFST exchanged in offset files after ODF ICD clarification.
- Uses \psfig instead of \includegraphics to include Postscript figures.
- Upgraded to be compatible with attcalc 3.1.

Version 1.5 - 08-12-1998
-----------
- Fixed SPR 877 (Documentation).
- Modified due to restriction on parameter case in attcalc 2.1

Version 1.4 - 27-11-1998
-----------
- Fixed SPR 815 (emchain wrong perl path; emchain_test regression test buggy).
- Modified to follow new attcalc 2.0 parameters.

Version 1.3
-----------
- Input files made coherent with badpix.

Version 1.2
-----------
- Test harness corrected.

Version 1.1
-----------
- Modified to follow new attcalc parameters.
- Several minor improvements.

Version 1.0
-----------
- Initial version for SAS v1 integration.