Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/6.5.0/doc/esplinemap/ChangeLog Дата изменения: Wed Aug 3 20:44:10 2005 Дата индексирования: Sat Dec 22 10:04:53 2007 Кодировка: Поисковые слова: http astrokuban.info astrokuban

ChangeLog for esplinemap
===============================

Version 4.2.1 - 2005-08-03 GL
-------------------------------

Reduce dynamic range of fitted data by
transformation f'(x,y)=(f(x,y))**0.1
Set weight of the excluded bins to 0.1, not to 0.0.
Close SSC-SPR-3498


Version 4.2 - 2004-10-07 (EO)
-----------
+ Copy of 4.0.5 that will enter into release track builds.

Version 4.1 - 2004-10-07 (EO)
-----------
+ Copy of 4.0.4 that will go into public release SAS 6.1.0

Version 4.0.5 - 2004-05-27 GL
-------------------------------

Remove extrapolation of background map
outside the detector mask. (Due to need to add
MOS1*2 maps for 2XMM)




Version 4.0.4 - 2004-05-14 VH
-------------------------------

- a new module cgenl.f90 implemnted for replacing
common blocks cgenl_f90.cmn and clslst_f90.cmn.


Version 4.0.3 - 2004-03-02 GL
-------------------------------

- Catch missing exposure extensions in OOT events file.
- Close SSC-SPR-3253


Version 4.0.2 - 2004-02-26 GL
-------------------------------

Updated task description.


Version 4.0.1 - 2003-12-19 GL
-------------------------------

Changed convergence criterion STOPCR from 1E-10 to 1E-7.
Apply sigma clipping only to positive excesses.

Version 4.0 - 2002-12-08 GL
-------------------------------

Write error message if exposure map is not given
with fitmethod=model
Change major version in order to reflect the changes
already made in v3.7


Version 3.7 - 2002-12-03 VVH,GL
-------------------------------


Implemented alternative background estimation by fitting scaled exposure
map and constant component to cheesed image.
New parameters: withexpimage2, expimageset2, fitmethod




Version 3.6 - 2002-11-27 GL
-----------------------------

Use weighting of bins for spline fits according to number
of valid pixels in bin.

Improved replacement of empty (eg cheesed) bins by interpolation.


Version 3.5 - 2002-06-29 GL
-----------------------------

Changed default values of parameters pimin,pimax
Closed SPRs: SSC-SPR-3075 (Parameters pimin & pimax not described)
SSC-SPR-3012 (task description)


Version 3.4 - 2002-11-01 GL
-----------------------------

Adapted to column name change in eboxdetect 4.11


Version 3.3 - 2002-05-24 GL
-----------------------------

Changed .par file to XML


Version 3.2.3 (2002-05-24) GL
-----------------------------

Prevent crashes due to access of RAWCOLS with chipix=0


Close SPR:
SSC-SPR-2841: Problems with new oot features

Version 3.2.2 (2002-04-16) GL
-----------------------------

Close SPR:
SSC-SPR-2841: Problems with new oot features


Version 3.2.1 (2002-04-16) GL
-----------------------------

Close SPR:
SSC-SPR-2832: Does not build statically

Version 3.2 (2002-04-16) GL
-----------------------------

Fixed bug in CAL calls.


Version 3.1 (2002-04-16) GL
-----------------------------

Updated ChangeLog.


Version 3.0 (2002-04-15) GL
-----------------------------

Included treatment of OOT events.
New parameters "withootset" and "ooteventset".


Version 2.8.2 (2002-03-01) HB
-----------------------------

identical to 2.8.1 which for some reason was not
ingested into the system properly

Version 2.8.1 (2002-02-27) HB
-----------------------------

Closed SPR:
-SSC-SPR-2718: INSR array out of range if input source table empty (on Linux)

Version 2.8 (2002-01-10) HB
---------------------------

test harness updated

Version 2.7 (2002-01-09) HB
---------------------------

default values of parameters withexpimage and withdetmask set to true

Closed SPR:
+SSC-SPR-2692 esplinemap writing massive output

Version 2.6 (2001-10-17)
------------------------

Closed SPR:
+ SSC-SPR-2374 Incomplete directory execution rights

Version 2.5 (2001-07-25)
------------------------

the dynamic range of the input data for the spline fit was
compressed to avoid oscillations of the spline map in the
presence of bright extended sources

Closed SPR
+ SSC-SPR-2477 (on emldetect) fixed by extending the backgrounnd
to areas outside the FOV (if withexpimage=true)

Version 2.4 (2001-03-30)
------------------------

DEPEND file updated

Version 2.3.1 (2001-03-16)
--------------------------

Task parameter idinst was removed. The instrument id is now read
from the INSTRUME keyword of the input image.
Closed SPR:
+ SSC-SPR-2113 can't specify cheese filename
+ SSC-SPR-2131 does not trap detmask from wrong camera
+ SSC-SPR-2251 float to string problem

Version 2.3 (2001-01-26)
------------------------

+ as suggested by JO, source cut-out radii are now source count dependent
(two new parameters, IDINST and IDBAND added. Parameter scut redefined)
+ SSC-SPR-2191 (was closed in v2.2): additional correction of number of
free parameters of spline fit: was (nx-4)(ny-4); corrected
to (nx-8)(ny-8) (= number of internal nodes of bicubic
spline fit; see, e.g., description of NAG routine E02DAF)
+ SSC-SPR-2056 on edetect_chain (already closed): additional measures
to reduce undesired oscillating behaviour of spline fit:
1. lower limit of background map forced to 20% value of
background histogram
2. removal of negative 4-sigma excesses from spline fit
input data (previously only positive 4 sigma excesses
were removed)

Version 2.2 (2001-01-15)
------------------------

Closed SPR:

+ SSC-SPR-2191 reduced chisqr quoted in output file keyword is incorrect.
The number of dof of the spline fit is now listedin
keyword NDOF.


Version 2.1 (2000-12-20)
------------------------

Closed SPRs:

+ SSC-SPR-2056 Background maps showing holes
+ SSC-SPR-2114 sets input or output?
+ SSC-SPR-2116 mmlmin not in input file
+ SSC-SPR-2122 Task crashed with FITSIO error

Version 2.0 (2000-09-25)
------------------------

- Reduced Chi**2 of spline fit is now copied to keyword CHISQR of
background map.

Closed SPRs:

+ SSC-SPR-1955 Input filename limited to 80 characters
+ SSC-SPR-0829 NO CHANGE when modifying the Spline_Node
+ SSC-SPR-0828 Radius of excluded regions
+ SSC-SPR-0826 Documentation Concern


Version 1.9 2000-07-28
-------------------------

Task now generates an error if WCS reference pixel is outside FOV
.lyt file added

Closed SPR:

+ SSC-SPR-1933 Task in infinite loop ?


Version 1.8.2 2000-07-02
-------------------------

+ test output removed


Version 1.8.1 2000-07-02
-------------------------

Closed SPRs:

+ SSC-SPR-1147 PSF center harcoded at 320,320
+ SSC-SPR-1604 Task fails if optional parameters are omitted
+ SSC-SPR-1791 missing info file

Version 1.8 (January, 25 2000)
--------------------------------

- input source list modified to conform to DCPs
(requires eboxdetect v3.0 or higher)
- task now reads i1, i2, i4, r4, and r8 input images
- task description adjusted to actual functionality of
present task version


Version 1.7.1 (Marco Beijersbergen, 1999-12-15)
-------------

- added DISTRIBUTION
- fixed obsolete DAL calls


Version 1.7 (July 20, 1999)
---------------------------

- this corrects an error which resulted in a program crash
if image sizes are not pultiples of 16 pixels

- open SPRs: see version 1.6

Version 1.6 (July 12, 1999)
---------------------------

- parameter names changed to conform to convention

Closed SPRs:

- 0827: box_size column filled in input source table
- 0984: taskmain included in DEPEND

Open SPRs:

- 0826: documentation
- 0828: size of excluded regions
- 0829: spline nodes


Version 1.5
----------------------

- Now operates on arbitrarily sized input images


Version 1.4
----------------------

- Routine cp_head exchanged with newer version. This was required
to make the output of esplinemap consistent with the other tasks
in the edetect_chain script.

- Minor corrections in task description.

Version 1.3
----------------------

Closed SPRs:

- 0363: Scientific functionality added.
- 0510: Test harness corrected.

Version 1.2
----------------------

Default values for file name parameters removed.

Closed SPRs:

- 0364: Test harness: changed: f90 program used to compare output
to reference background map.
- 0365: File test/Makefile edited.
- 0474: "draft" removed from task description.

Open SPRs:

- 0363: Full functionality will be added in version 1.3.


Version 1.1
----------------------

ChangeLog added

Closed SPRs:

- 0162: .par file provided instead of .prm
- 0165: test harness is more robust now
- 0166: "

Open SPRs: (will be treated in next task version)

- 0161: test_plan
- 0163: algorithmic section to be added in next task versionq
- 0164: cp_head to be replaced by generic mechanism

Version 1.0
----------------------------

- Original version submitted to the SOC

To do list:
===========

- implement source extent dependent cutout radius

- add out-of-time events contribution to background map

- add error handling and verbosity control

- add CAL call to function blur

- upgrade io routines

- change F77 code to F90

- upgrade task description