... DISKS: You will need installation disks: a "bootkernel" disk and a "root/install ... DISK SETS Once you've made your boot and install disks, you'll need to make the disk ...
... These are root-install disks for Slackware 2.3.0. ... You will need one of these disks to install Linux. ... The disk is created by uncompressing the image with GZIP.EXE. ...
... The first 3 disks of Slackware Linux, the A disks, should all fit within 1.2M. To install them, you'll need a boot kernel, and ... Disk series other than A won't fit onto 1.2M disks. I sincerely hope this helps! ...
... sys on disk 1, add one line to it: SET SOURCEPATH=C:\OS2IMAGE Boot from disk 0, then insert disk 1 and disk 2 when prompted ... Windows disks, enter name "c:\os2image\win_1" and so on; alternatively you can rename WIN_x directories into DISK_Wx after ...
... UMSDS144 install disk: This is an version of the Slackware Linux distribution made ... on one of your DOS partitions, and will be bootable through the use of a boot disk ...
... The DCF/2, or Disk Compression Facility/2 allows users to increase their local physical disk storage without affecting ... disk compression using the DCF/2 results in 35% to 70% additional disk space, depending on the types of information on the disk ...
... AT&T) Always IN2000 Seagate ST-02 Pro Audio Spectrum 16 Future Domain TMC-8xx, 16xx QLogic Trantor T128/T128F/T228 Ultrastor 7000 FASST Note: The 'scsi' disk and the disks with non-SCSI CD-ROM drivers contain all the SCSI drivers from both lists 1 and 2 ...