... Depending on the set parameters a beep is heard, the green light LED flashes once and the vibrator stirs to confirm that the alarm has been sent. 3. ...
[
Текст
]
Ссылки http://www.atnf.csiro.au/observers/SOC/Marsfield-SOC-ManDownAlarmUnit19Aug2013.pdf -- 686.5 Кб -- 11.09.2013 Похожие документы
... this will mean that you will get colour flashing when you move from one window the ... Two images 1 , then you will see the model set in red and the data set in green ... Both are red and green, the difference being that the colours are swapped with ...
... use the RAID Tools GUI or hold the power button down at the back of the chassis for about 10 seconds (until it starts flashing ... Power on takes a few minutes. Check a green light comes on on each disk. A red or orange light means disk failure. ...
... use the RAID Tools GUI or hold the power button down at the back of the chassis for about 10 seconds (until it starts flashing ... Power on takes a few minutes. Check a green light comes on on each disk. A red or orange light means disk failure. ...
... A flashing insertion-cursor also appears within entry boxes. ... Green means that the system is functioning normally. ... Antenna status, green, orange, red. ...
... green, orange, red. 10.1.4 [attenuator] Attenuator system status, green, orange, red ... 10.17.7 [Flash on read (pink)] Flash widgets (entry boxes or buttons) when they are ...