... to the parent you should issue a command such as: kill -TERM `cat /usr/local/apache/logs/httpd.pid` You can read about its progress by issuing: tail -f /usr/local/apache/logs/error_log Modify those examples to match your ServerRoot and PidFile settings ...
... In this plot however it's possible to fit the tails obtaining 2 slopes: 10 s and 1 s. A zoom of the neutron candidate is shown in the picture below: the rough energy in nhits is about 600 which is consistent with the energy observed for the observed ...
[
Текст
]
Ссылки http://rtm-cs.sinp.msu.ru/docs/borexino/laben_neutron_report.pdf -- 163.4 Кб -- 24.01.2008 Похожие документы
... Your LINUX server is now set. do a "tail -f /var/adm/messages" and a "tail -f /var/adm/syslog" simultaneously and attempt to connect using NETSCAPE from your CLIENT machines. ...
... Before you reboot, you might want to type the following command: tail -f /var/log/messages . ... Control-C exits the tail -f command. If you have not set up DHCP, configuration is still fairly easy. ...
... 0-500 ns, used to determine an event's energy; the charge in the "tail" of the pulse (48-548 ns) which is used for pulse shape ... We take into account such a suppression of high energy tails in decays of 12 B and 11 Be using the probability (E ) for ...
... People wishing to pay go stand in line at the 'tail end' of the queue. ... The normal behaviour of router queues on the Internet is called tail-drop. ... Tail-drop works by queueing up to a certain amount, then dropping all traffic that ...
... If the bootup messages scroll by too quickly to read, you should be able to retrieve them using dmesg or tail /var/log/messages ... dmesg . or . % tail /var/log/messages . If your drive was not found then something is wrong. ...