. To remove a file use the command: rm [option] filename . To remove a directory use the command: rmdir directory_name . or rm -r directory_name . You cannot retrieve a file or directory that has been removed; it has been removed permanently. Removing files . Removing directories .

Еще в разделе: (Показать все результаты (>787) - comet.sai.msu.ru/ )

• **Caution**
• Examples of commands
• Examples of using multiple options

... Apache HTTP Server Version 2.4 . Apache > HTTP Server > Documentation > Version 2.4 > Programs . ... htcacheclean is used to keep the size of mod_cache_disk 's storage within a given size limit, or limit on inodes in use. ... If one or more URLs are specified, each URL will be deleted from the cache, if present. ... Specify limit as the total disk cache size limit. ... By passing the -a or -A options to htcacheclean , the URLs within the cache will be listed as they are found, one URL per line. ...

Еще в разделе: (Показать все результаты (>9375) - www.arcetri.astro.it/ )

• httpd - Apache Hypertext Transfer Protocol Server - Apache HTTP Server
• apxs - APache eXtenSion tool - Apache HTTP Server

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Еще в разделе: (Показать все результаты (>15138) - www.eso.org/ )

Next: MIDAS And the Up: Monitor and Command Previous: Monitor and Command . ... the MIDAS working directory for internal files and (optionally) private procedures: . ... On a Unix system use the option -m < mid_work > to change the default working directory, and -p or -P to run MIDAS in parallel mode   when you start MIDAS via the command inmidas (see below). ... In NOPARALLEL mode all intermediate MIDAS files in the MIDAS startup directory are deleted when starting MIDAS via inmidas. ...

Еще в разделе: (Показать все результаты (>3834) - www.sao.ru/ )

• htcacheclean - Clean up the disk cache - Apache HTTP Server
• apxs - APache eXtenSion tool - Apache HTTP Server
• Apache Tutorial: Dynamic Content with CGI - Apache HTTP Server

The File System . This section describes how you can create new files, copy existing files, and delete obsolete files. ... RENAME to change the name of a file. ... Files can be created in several ways: text can be entered from the keyboard via the CREATE command, an editor can create a file, as can a running program, and files can be copied from other directories. ... To delete obsolete files, use the DELETE command followed by a file name or file name template (wildcards). ...

Еще в разделе: (Показать все результаты (>16829) - www.stsci.edu/ )

• Archive for February
• New STIS spectral extraction box size options in ETC
• Directories

... Common options . All SAS tasks support the following command line options: . ... If the task uses the ODF Access Layer ( oal ) the following command line option is recognized as well: . ... odf odf . ... odf can be the name of an ODF summary file as created by the task odfingest or merely the name of a directory containing one. ... All tasks may have additional parameters in a parameter file, that can be set on the command line (more information can be found in package param ). param = value . ...

Еще в разделе: (Показать все результаты (>7077) - xmm.vilspa.esa.es/ )

• Analysis options

Next: C Standard Library Functions Up: Common C Compiler Options Previous: Common C Compiler Options . c Suppress linking with ld(1) and produce a .o file for each source file. A single object file can be named explicitly using the -o option. ... Sends the output to the standard output, or to a file named with the -o option. Includes the cpp line numbering information. ... When this option is given, the -O and -R options are suppressed. -help Display helpful information about compiler. ...

Еще в разделе: (Показать все результаты (>1374) - jet.sao.ru/ )

• Running Make

... With autofs, you do not get (or even have the option of getting) browsable icons for the mount point of each automount map. ... The more major problem is that after going to one of those mount points by hand (command-shift-g), you can see a nice list of mountable directories (yay!), but when you click on them they don't mount; instead you get an error message. ... If the user has a hard drive they'll know about it, and look for it in a directory full of mounted volumes. ...

Еще в разделе: (Показать все результаты (>3673) - hea-www.harvard.edu/ )

• Leopard: Trash broken in NFS home directories
• PC To VAX FTP Commands
• Multi-Rsh parallelized rsh program

... Classes . ... casa::TSMOption . ... This class can be used to define how the Tiled Storage Manager accesses its data. ... The constructor of the class can be used to define the options or to read options from the aipsrc file. TSMOption::Cache Use unbuffered file IO with internal TSM caching. ... TSMOption::Aipsrc Use the option as defined in the aipsrc file. ... Only on 32-bit systems it is different. tables.tsm.maxcachesizemb gives the maximum cache size in MB for option TSMOption::Cache . ...

Еще в разделе: (Показать все результаты (>20357) - www.atnf.csiro.au/ )

• casacore: casa::TableLock Class Reference
• difx:build [ATNF VLBI Wiki]
• casacore: tables/Tables/TSMOption.h Source File

... Before one can use a filesystem, it has to be mounted . ... Since all files in UNIX are in a single directory tree, the mount operation will make it look like the contents of the new filesystem are the contents of an existing subdirectory in some already mounted filesystem. ... mount /dev/hda3 /usr . ... When the system is booted, before the /usr   filesystem is mounted, a /var/tmp   directory residing on the root filesystem is used instead. ... The root filesystem is usually first mounted readonly....

Еще в разделе: (Показать все результаты (>2698) - star.arm.ac.uk/ )

• Restoring files with tar
• The /etc directory
• Simon's Software - howto 1-3

... Statistic files are managed using file generation sets and scripts in the ./scripts directory of this distribution. ... Each valid update appends a line of the following form to the current element of a file generation set named peerstats : . ... This keyword allows the (otherwise constant) filegen filename prefix to be modified for file generation sets, which is useful for handling statistics logs. filegen name [ file filename ] [ type typename ] [ flag flagval ] [ link | ...

Еще в разделе: (Показать все результаты (>2410) - www.sai.msu.su/ )

• Configuration Options
• Miscellaneous Options
• Access Control Options

The sections <Directory> , <Location> and <Files> can contain directives which only apply to specified directories, URLs or files respectively. Also htaccess files can be used inside a directory to apply directives to that directory. ... The order of merging is: . ... If multiple <Directory> sections apply to the same directory they are processed in the configuration file order. ... Using the options in question is only possible inside a <Directory> section (or a .htaccess file). ...

Еще в разделе: (Показать все результаты (>120) - neptun.sai.msu.ru/ )

• Apache HTTP Server: Security Tips
• Apache Tutorial: Dynamic Content with CGI
• Using Apache with Novell NetWare

... Bojan Nikolic web pages (r. 329) . ... Building CASA . ... Introduction to SCons . I have designed a prototype implementation of a build system for CASA based on the SCons tool. ... This system is experimental and not the official way of building CASA. ... The main version of the code for this build system is contained in a bzr branch, together with the remainder of the CASA system. ... Build: . ... To debug the SCons build process: . ... A prototype build system for CASA using SCons . ...

Еще в разделе: (Показать все результаты (>1142) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / File Permissions
• OptInt PmWiki : PmWiki / Initial Setup Tasks
• OptInt PmWiki : PmWiki / Wiki Farm Terminology

CIMA is more than just the observing tool - in fact, the observing tool is just a part of a bigger package called the CIMA software package. ... There is also a another package called the CIMA WAPP software which contains the WAPP software, the special Tcl/Tk interpreter used by CIMA and support libraries. ... All CIMA software components recognize the following general options that are part of the CIMA version selection system: . ... The select_cima script can be used to set up a default version. ...

Еще в разделе: (Показать все результаты (>3879) - www.naic.edu/ )

• datataking_software
• vxWorksPrograms
• software_downloads

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

Еще в разделе: (Показать все результаты (>9076) - crydee.sai.msu.ru/ )

• crydee.sai.msu.ru archive : search
• crydee.sai.msu.ru archive : new files
• Adding Variables to CONFIG.SYS

... 19  *</tt>: landscape textures and data files</li> . ... 73  If a file exists in the <em>User Data Directory</em>, it will be used in preference to a file with the same name existing in the <em>Installation Data Directory</em>. ... 79   <li>Users who modify files in the <em>Installation Data Directory</em> will likely have their work deleted or overwritten when they upgrade Stellarium. ... In this case , all the files would be in the <em> \<Installation Data Directory>/stars/default</em> directory. ...

Еще в разделе: (Показать все результаты (>571) - astro.uni-altai.ru/ )

• Stellarium: CLIProcessor Class Reference
• Stellarium: Scripting Engine
• Stellarium: File and Directory Structure

... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...

Еще в разделе: (Показать все результаты (>2476) - www.meade.com/ )

• Meade Instruments Corp. - Meade Customer Support

... The files in this directory are for installing the latest version 3.0.0 of AstroImageJ on Linux, Windows, and Mac operating systems. ... If you have Java already installed on your system (32-bit or 64-bit), download the following version of AstroImageJ that does not include Java embedded in installation. ... To install AstroImageJ on a 64-bit Windows machine, install the following file which includes the Java 7 64-bit runtime environment ( jre ). ... Run AIJ by double-clicking AstroImageJ.exe. ...

Еще в разделе: (Показать все результаты (>1619) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/xpa-2.1.14/INSTALL
• Options (ImageJ API)
• ij.plugin (ImageJ API)

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

Еще в разделе: (Показать все результаты (>139) - lnfm1.sai.msu.ru/ )

• Manpage of FITSHDR_EDIT
• Manpage of FITSHDR_EXPAND

Allows you to specify a drift scan: motion at a constant velocity along a great circle. ... The path starts at the new object position (though the telescope actually intersects the path later, see Subtleties ). ... Note that the units are always /sec for both axes. ... The velocity along the path is 0.01 /sec. ... The path is assumed to start when you hit the Slew button (more precisely, when the TCC parses the command). However, it takes the telescope awhile to slew to meet the specified path. ...

Еще в разделе: (Показать все результаты (>796) - www.apo.nmsu.edu/ )

• Agile PCI-SyncClock32 Timer Card
• TUI:Telescope:Slew Window:Options:Mag PM
• TUI:Telescope:Slew Window:Options:Calibrate