... GPI Data Pipeline 1.0 documentation . ... Frequently Asked Questions . ... When trying to start the pipeline, I get the error ?xterm: Can?t execvp idl: No such file or directory? ... Credits for the GPI Pipeline Software Development . ... You can either (1) change your $PATH to include the directory with idl, (2) put a symlink pointing to idl in some directory already in your path, or (3) edit your local copy of the gpi-pipeline script to explicitly set the full path to the idl executable. ...

Еще в разделе: (Показать все результаты (>23883) - www.stsci.edu/ )

• A.1 Initiating IRAF

README for XFree86 on OS/2 : Adding Variables to CONFIG.SYS . ... ETC . Set to an ETC directory. Normally, this is already set to the ETC directory of the TCP/IP code, such as SET ETC=C:\TCPIP\ETC For Warp 4 and later, this may point to the \MPTN\ directory. ... Normally you will set this variable to the same value as the HOSTNAME variable and simply add a :0.0 after it, such as SET DISPLAY=myhost:0.0 Read the X11 man page on the exact meaning of these postfixes and other options. ...

Еще в разделе: (Показать все результаты (>7157) - crydee.sai.msu.ru/ )

• Checking Compatibility of Video Hardware

Next: MIDAS And the Up: Monitor and Command Previous: Monitor and Command . ... the MIDAS working directory for internal files and (optionally) private procedures: . ... On a Unix system use the option -m < mid_work > to change the default working directory, and -p or -P to run MIDAS in parallel mode љ when you start MIDAS via the command inmidas (see below). ... In NOPARALLEL mode all intermediate MIDAS files in the MIDAS startup directory are deleted when starting MIDAS via inmidas. ...

Еще в разделе: (Показать все результаты (>3515) - www.sao.ru/ )

• mod_setenvif - Apache HTTP Server
• Values, Variables, and Literals
• mod_cgi - Apache HTTP Server

No command line options or environment variables needed. -control . Name of host running control.pl (default is $RTFC_CONTROL) . ... Default 1. ... Name of host running fringe checker interface (default localhost then $RTFC_CORRELATOR)) . ... Name of host running control.pl (defaults to $RTFC_CONTROL) . ... Name of optional config file to pre-set variables (defaults to $RTFC_CONFIG then ~/.config if it exists) . ... To see the current value of a variable, just type the variable name with no value. ...

Еще в разделе: (Показать все результаты (>28511) - www.atnf.csiro.au/ )

• Directories and Paths
• User Parameters - Data Location & Beam Selection CentralProcessor 0.11
• Pulsar Group PmWiki/Initial Setup Tasks

... Meta Index / Home Page / User information The behavior of the tasks is modified by the following environment variables: . ... This has the same meaning as the command line option --ccf (see above). A command line override supersedes any assignment made to SAS_CCF , i.e., the CIF pointed at via SAS_CCF is ignored in this case. ... A command line override supersedes any assignment made to SAS_CCFFILES , i.e., the list of CCF replacement constituents is ignored in this case. ...

Еще в разделе: (Показать все результаты (>9730) - xmm.vilspa.esa.es/ )

• Examples

dfos = Data Flow Operations System, the common tool set for DFO . That initialization file sets up a standard set of global variables which must exist for dfos to run. ... The .dfosrc file contains one part of the instrument specific (or better: account specific) information needed by dfos. ... The set of links under 'Installation' collect a set-by-step installation scenario which makes sense only if the configuration files are filled reasonably. ...

Еще в разделе: (Показать все результаты (>48762) - www.eso.org/ )

• OT V.1.4.1 installation instructions
• .dfosrc
• Plot variables and their indices

OptInt PmWiki : Pm Wiki / Initial Setup Tasks . ... Most PmWiki configuration is performed in files called local/config.php and pub/css/local.css . ... When you first install PmWiki, the local/config.php file does not exist. Copy the sample-config.php file (in the docs/ directory) to local/config.php and use it as a starting point. ... When changing the configuration of your site, always change the local/config.php file or add files to the cookbook/ or pub directories. ... Just make an text-file. ...

Еще в разделе: (Показать все результаты (>2809) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / Path Variables
• OptInt PmWiki : Initial Setup Tasks
• OptInt PmWiki : PmWiki / Upload Variables

... Apache HTTP Server Version 2.2 . ... Allows the setting of environment variables based on characteristics of the request . ... setenvif_module . ... The mod_setenvif module allows you to set internal environment variables according to whether different aspects of the request match regular expressions you specify. ... Environment Variables in Apache . ... The BrowserMatch is a special cases of the SetEnvIf directive that sets environment variables conditional on the User-Agent HTTP request header. ...

Еще в разделе: (Показать все результаты (>8972) - www.arcetri.astro.it/ )

• Useless form
• Custom Error Responses - Apache HTTP Server
• mod_cgi - Apache HTTP Server

Describes the environment variables which can be used to tailor the overall Funtools environment. ... The FITS_EXTNAME environment variable specifies the default FITS extension name when FunOpen() is called on a file lacking a primary image. ... ARRAY . The ARRAY environment variable specifies the default definition of an array file for Funtools. ... The EVENTS environment variable specifies the default definition of an raw event file for Funtools. ... You also can use the CC environment variable. ...

Еще в разделе: (Показать все результаты (>2929) - hea-www.harvard.edu/ )

• common tcsh completions
• A Few Words About ROSAT Directories at SAO
• Changes for release 1.8

... EDITOR Sets the editor that will be used by other programs such as the mail program. PAGER Sets the pager that will be used by programs such as man to display man pages. PATH Specifies the directories that the shell is to look through to find a command. ... PRINTER Sets the printer to which all output is sent by the lpr command SHELL Sets your default shell. TERM Sets your terminal type for programs such as the editor and pager. TZ Sets the time zone you are in. ...

Еще в разделе: (Показать все результаты (>842) - comet.sai.msu.ru/ )

• Useful mail variables
• Examples of environment variable names
• Command line editing with the Korn shell

This document explains how to install, configure and run Apache 1.3 under Novell NetWare 5.x and above. ... Apache 1.3 is designed to run on NetWare 5.x and above and is installed by default on all NetWare 6 servers. ... You will need to compile apache and copy the files over to the server manually. ... Follow these steps to install Apache on NetWare from the binary download (assuming you will install to sys:/apache): . ... Copy the MIME.TYPES and magic files to SYS:/APACHE/CONF directory . ...

Еще в разделе: (Показать все результаты (>122) - neptun.sai.msu.ru/ )

• Apache module mod_setenvif
• Apache module mod_cgi
• Environment Variables in Apache

... xntpd is an operating system daemon which sets and maintains the system time-of-day in synchronism with Internet standard time servers. xntpd is a complete implementation of the Network Time Protocol (NTP) version 3, as defined by RFC-1305, but also retains compatibility with version 1 and 2 servers as defined by RFC- 1059 and RFC-1119, respectively. xntpd does all computations in 64-bit fixed point arithmetic and requires no floating point support. ... Specify the name and path of the log file. ...

Еще в разделе: (Показать все результаты (>2639) - www.sai.msu.su/ )

• Miscellaneous Options
• Building and Installing the Distribution
• tickadj - set time-related kernel variables

lsst.tcc љ 1.2.2-3-g89ecb63 . ... Namespaces . ... NamespaceљList . NamespaceљMembers . ... tcc.base.getStdDirs Namespace Reference . defљ . ... Get path to data directory (value of environment variable TCC_DATA_DIR)) More... љ . ... Get path to instrument data directory. ... Get path to batch job directory. ... def tcc.base.getStdDirs.getDataDir . Get path to data directory (value of environment variable TCC_DATA_DIR)) . Definition at line 8 of file getStdDirs.py . ...

Еще в разделе: (Показать все результаты (>1451) - www.apo.nmsu.edu/ )

• Student Research at Manastash Ridge Observatory
• lsst.tcc: tcc.parse.getPVTPxPMRadVel Namespace Reference
• lsst.tcc: python/tcc/axis Directory Reference

Posting Observations . ... You will need to subscribe to vsnet-acc (to allow you access to post your observations). ... VSNet has several different e-mail sigs, and sub sigs. ... These list are controlled by a software package called " Majordomo ", which allows you to subscribe and unsubscribe yourself from these list with an e-mail message (automated). ... Once you have subscribed to vsnet-acc (which will only send you a welcome message back and nothing else) you can post to the other list. ...

Еще в разделе: (Показать все результаты (>891) - www.rochesterastronomy.org/ )

... C Total number of scans in a cycle:4 Scan 930900005, UTC=2000-01-05T12:06:42, AST=2000-01-05T08:06:42 Object: U3489 nter Command (UPPER CASE) or Object Name: (cr will keep U3489 QUIT to stop converting, DRIVE to finish entire file with same object name, UNTIL to continue for num or until reaching scan, NEWCYCLE to change the number of scans in a cycle to num, SKIP [num | ... Offset 5400.000000 (5400.165333) Scan 930900011: U3489-3. Offset 5400.000000 (5399.659220) Scan 930900012: U3489-4. ...

Еще в разделе: (Показать все результаты (>6990) - www.naic.edu/ )

• software_downloads
• CIMA Frequently Asked Questions
• datataking_software

... Team . ... GRB mini-workshop 2006 . ... On April 8, 2005, an optical afterglow of the GRB 050408 was discovered with the SAO's telescopes (the 1-meter telescope Zeiss and 6-meter telescope BTA) within the framework of a joint BTA request (SAO RAS + IAA CSIC, Granada, Spain) on optical identification of gamma-ray bursts. We first detected a variable object only by our own data in the localization error-box reported by the space observatory HETE and then it was confirmed by our observations in SAO. ...

Еще в разделе: (Показать все результаты (>1849) - jet.sao.ru/ )

• From Power Up To Bash Prompt: Bash
• The command line interface (TEXT CEILIDH ONLY)
• Question/answer exercises

Peremennye Zvezdy ( Variable Stars ) 35 , No. ... We present the results of our new observations of QS Draconis, a recently discovered double-mode high-amplitude Scuti variable, HADS(B) type. ... Our CCD observations in the Johnson bands were performed at the Tien Shan Astronomical Observatory of the V.G. Fesenkov Astrophysical Institute, at the altitude of 2750 m above the sea level. ... The finding chart (Fig. 1) identifies the variable star, comparison star, and check star. ... Fig. ...

Еще в разделе: (Показать все результаты (>58408) - www.astronet.ru/ )

• Startling Star V838 Mon

This document provides a brief summary on how to use the bits and pieces for the BRUCE codes as specifically implemented in Armagh. ... The utils subdirectory contains the source code for the program SPECTRUM2TGK, which is used to convert an intensity spectrum produced by SPECTRUM into the format required for the grids which KYLIE uses. ... IN_FILE . ... SPECTRUM2TGK is used to convert intensity spectra, produced by SPECTRUM , into the format required for one element of a spectral grid used by KYLIE. ...

Еще в разделе: (Показать все результаты (>3312) - star.arm.ac.uk/ )

• Armagh Observatory
• Simon's Software - howto 1-3
• The /etc directory

... CEPHEID VARIABLE STARS: A Cepheid variable or Cepheid is a member of a particular class of very luminous, massive variable stars with pulsation periods of 1-70 days. ... The relationship is calibrated using data collected from Cepheids whose distances are determined by other means. ... Browse through the 68 CCD fits images he sent you, using ds9 and locate the Cepheid variable. ... Image credits: ESA - "http://sci.esa.int/science-e-media/img/20/cepheid-variables.jpg" . ...

Еще в разделе: (Показать все результаты (>737) - www.mso.anu.edu.au/ )

• ANU - RSAA - 5th Stromlo Symposium Registration
• Siding Spring Survey Follow-up Obs
• Marc White - Astrophysicist - The Australian National University

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

Еще в разделе: (Показать все результаты (>524) - lnfm1.sai.msu.ru/ )

• Shugarov's Home Page
• Отдел Изучения Галактики и переменных звезд
• Division of the Galaxy and Variable Stars