This document explains how Apache uses the URL of a request to determine the filesystem location from which to serve a file. ... User Directories . URL Redirection . ... the URL http://www.example.com/docs/dir/file.html will be served from /var/web/dir/file.html . ... The module mod_userdir extends this idea to the web by allowing files under each user's home directory to be accessed using URLs such as the following. http://www.example.com/~user/file.html . ...

Еще в разделе: (Показать все результаты (>134) - neptun.sai.msu.ru/ )

• Apache Tutorial: Dynamic Content with CGI
• Apache module mod_example
• Apache HTTP Server: Security Tips

Modules | ... Apache HTTP Server Version 2.4 . ... Some files in the modules/experimental directory under the Apache distribution directory tree are provided as an example to those that wish to write modules that use the Apache API. ... If you link it into your server, enable the "example-handler" handler for a location, and then browse to that location, you will see a display of some of the tracing the example module did as the various callbacks were made. ... Using the mod_example Module . ...

Еще в разделе: (Показать все результаты (>10221) - www.arcetri.astro.it/ )

• Apache Tutorial: Dynamic Content with CGI - Apache HTTP Server
• Per-user web directories - Apache HTTP Server
• mod_dir - Apache HTTP Server

Modules | ... Apache HTTP Server Version 2.2 . ... Some files in the modules/experimental directory under the Apache distribution directory tree are provided as an example to those that wish to write modules that use the Apache API. ... If you link it into your server, enable the "example-handler" handler for a location, and then browse to that location, you will see a display of some of the tracing the example module did as the various callbacks were made. ... Using the mod_example Module . ...

Еще в разделе: (Показать все результаты (>2858) - www.sao.ru/ )

• Apache Tutorial: Dynamic Content with CGI - Apache HTTP Server
• Mapping URLs to Filesystem Locations - Apache HTTP Server
• Per-user web directories - Apache HTTP Server

The XPA source code directory contains two test programs, stest.c , and ctest.c that can serve as examples for writing XPA servers and clients, respectively. ... The stest program can be executed with no arguments to start an XPA server that contains the access points: xpa, xpa1, c_xpa (containing sub-commands cmd1 and cmd2), and i_xpa. ... xpaset xpa # send to xpa cat xpa.c | xpaset "xpa*" # send to xpa and xpa1 xpaget xpa # receive from xpa xpaget xpa* # receive from xpa and xpa1 etc. ...

Еще в разделе: (Показать все результаты (>2051) - hea-www.harvard.edu/ )

• The Images Menu
• Multi-Rsh parallelized rsh program
• Adding New File Formats to SAOtng

Options can be grouped together: ls -FI . ... Directories are shown with a trailing '/'; files which have execute permission are shown with a trailing '*'. ... Some options need to be given separately: lpr -Plp2 -#4rm report.ps . This prints four copies of the file report.ps , removes the file and sends mail to the user on completion. The option -Plp2 which specifies the printer to be used is given separately from the other options. If the command were given as lpr -Plp2#4rm report.ps . ...

Еще в разделе: (Показать все результаты (>738) - comet.sai.msu.ru/ )

• Examples of setting vi options permanently
• Examples of commands
• List the files in a directory

OptInt PmWiki : Pm Wiki / File Permissions . ... uploads/ directory to save uploads. ... Thus, in a standard installation, the account holder manually creates the wiki.d/ and uploads/ directories, and sets the permissions on the directories to be world-writable in order for PmWiki (running as the webserver account) to be able to create files there. $ pwd /home/pmichaud/public_html/pmwiki $ mkdir uploads $ mkdir wiki.d $ chmod 777 uploads wiki.d $ ls -ld . ... Cookbook:Directory and file permissions . ...

Еще в разделе: (Показать все результаты (>1360) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / Path Variables
• OptInt PmWiki : File Permissions
• OptInt PmWiki : PmWiki / PmWiki Installation

... PmWiki . ... Go to new wiki . ... This page briefly describes PmWiki 's settings for file and directory permissions in a typical Unix environment. ... Thus, if the account holder creates the wiki.d/ and uploads/ directories, then they must also to set the directories to be world-writable (rwx) permissions in order for PmWiki (running as the webserver account) to create files there. $ pwd /home/pmichaud/public_html/pmwiki $ mkdir uploads $ mkdir wiki.d $ chmod 777 uploads wiki.d $ ls -ld . ...

Еще в разделе: (Показать все результаты (>26059) - www.atnf.csiro.au/ )

• mslist (Measurement summary and data inspection utility) CentralProcessor 0.11
• Pulsar Group PmWiki/File Permissions
• cmodel (Model Image Generator) CentralProcessor 0.11 documentation

Stellarium 0.12.3 . ... Classes . ... Scripting . ... Scripting Engine . ... Script Console . ... Since version 0.10.1, Stellarium includes a scripting feature based on the Qt Scripting Engine . ... Prior to version 0.10.0, Stellarium used a different scripting engine called StratoScript . ... Prior to version 0.10.0, Stellarium had a simple scripting engine, known as StratoScript . ... This script prints "Hello Universe" in the Script Console output window. core.debug( "Hello Universe" ); . ...

Еще в разделе: (Показать все результаты (>804) - astro.uni-altai.ru/ )

• Stellarium: /home/aw/devel/stellarium/trunk/doc/fileStructure.doxygen Source
• Stellarium: File and Directory Structure

... The files in this directory are for installing the latest version 3.0.0 of AstroImageJ on Linux, Windows, and Mac operating systems. ... If you have Java already installed on your system (32-bit or 64-bit), download the following version of AstroImageJ that does not include Java embedded in installation. ... To install AstroImageJ on a 64-bit Windows machine, install the following file which includes the Java 7 64-bit runtime environment ( jre ). ... Run AIJ by double-clicking AstroImageJ.exe. ...

Еще в разделе: (Показать все результаты (>1577) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio-3.310/README
• http://www.astro.louisville.edu/software/astroimagej/astroimagej_20130129/AA_README_AIJ
• http://www.astro.louisville.edu/software/astroimagej/installation_packages/AstroImageJ_installation_mac.html

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Еще в разделе: (Показать все результаты (>15342) - www.eso.org/ )

• DFOS: tune your browser
• ESO - Common Pipeline Library
• cleanupProducts

... psrfits2fil converts AO psrfits files from the pdev spectrometer to sigproc filterbank program. This standalone routine will probably one day be incorporated in the sigproc filterbank program. psrfits data taken with the mock pdev spectrometer is scan based. ... The routine will read all of the psrfits files from a scan and output a single sigprog.fil file. ... Output to a single file with same format as input: . ... The psrfits files for the test data are located in /share/pdata1/pdev/ . ...

Еще в разделе: (Показать все результаты (>4000) - www.naic.edu/ )

• software_downloads
• CIMA Software Components
• usrp software

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

Еще в разделе: (Показать все результаты (>217) - lnfm1.sai.msu.ru/ )

• Manpage of FITSHDR

Comedi Documentation . ... Right to the source: #include <stdio.h> /* for printf() */ #include <comedilib.h> int subdev = 0; /* change this to your input subdevice */ int chan = 0; /* change this to your channel */ int range = 0; /* more on this later */ int aref = AREF_GROUND; /* more on this later */ int main(int argc,char *argv[]) { comedi_t *it; lsampl_t data; it=comedi_open("/dev/comedi0"); comedi_data_read(it,subdev,chan,range,aref,&data); printf("%d\n",data); return 0; } . ...

Еще в разделе: (Показать все результаты (>1694) - jet.sao.ru/ )

• Contents
• Programming in C
• Running Make

... APT . Using APT to Write Big Phase II Programs . ... Astronomer's Proposal Tool . ... 1) Use APT to perfect a template visit (or subset of a visit). ... b) Use the Export Text Proposal feature to create the new text representation of your perfected 1 visit program. Then use a script or text editor to create duplicates and import the program back into APT. or . ... Use the Export Text Proposal feature to create the text representation of your program and use a text editor to search and replace. ...

Еще в разделе: (Показать все результаты (>19906) - www.stsci.edu/ )

• New STIS spectral extraction box size options in ETC
• Python T4:Using PyRAF: writing scripts and programs in Python: Demo Script
• Remote Windows

... Mp3Mixer Mode . LiveIce configuration can either be set using configuration files or by setting command line parameters at runtime. The LiveIce binary has a series of reasonable default options set in the binary - in particular liveice.h has a #define which can be used to set the default encoder. ... Server Options . ... Note that some encoders can't do less thatn 32kHz andsome will change your format to something else if the ideal format for a given bitrate is of a lower quality. ...

Еще в разделе: (Показать все результаты (>2620) - star.arm.ac.uk/ )

• Mounting and unmounting
• Compressed backups
• Creating a filesystem

Following are instructions to build and install the programs in this distribution. Make sure that you have all necessary tools for building executables. ... The automatic build process expects a configuration file called Config.local . ... The configuration file specifies the directory in which to install the binaries, as well as control over the generation of debugging code and reference clock support. ... Cleans out object files, programs and temporary files. make distclean . ...

Еще в разделе: (Показать все результаты (>1746) - www.sai.msu.su/ )

• Configuration Options
• Monitoring Options
• Miscellaneous Options

The idea of component-oriented programming is that in the course of implementation of various software projects a programmer (or a programmers team) accumulates a library of reused software fragments that are used in different projects. ... To solve such problems there are some special syntax means in Actor Prolog that support component-oriented programming. ... A package in Actor Prolog is a set of classes linked by implication. ... Actor Prolog supports visual component-oriented programming. ...

Еще в разделе: (Показать все результаты (>547) - www.cplire.ru/ )

• Getting Started in Actor Prolog. Analyzing Web Sites.
• Getting Started in Actor Prolog. Hello World.
• The INTERNET for SCIENTISTS and ENGINEERS

... In this example we will use /usr/local/data/catalogue for the location of all original catalogues, and /usr/local/scisim-x.y.z for the installation directory of SciSim . ... The installer has to specify their full path in the csim_config section of / usr / local / scisim-x.y.z /config/ scisim .cfg : gsc_regions / usr / local / scisim-x.y.z / data / catalogue /gsc.regions tic_ data / usr / local / scisim-x.y.z / data / catalogue /TICcat.dat wga_ data / usr / local / scisim-x.y.z / data / ...

Еще в разделе: (Показать все результаты (>8224) - xmm.vilspa.esa.es/ )

• Configuration of the browser
• Example Programs
• SAS Makefiles

... Up: Archives and Information Services . Previous: Search and Retrieval of the AXAF Data Archive on the Web using Java . ... Our Web interface to the HST archive (WDB) was substantially augmented during the past few months: A seamless integration of Java applets and CGI interfaces to the database now allows basic manipulation and visualization of data. ... These applets only require a common Web browser and offer very helpful features to facilitate archive data selection. ...

Еще в разделе: (Показать все результаты (>1802) - www.adass.org/ )

• Applying Public Access Programming Techniques To SAOimage
• DaRT: A Java Tool for Retrieving Archived Telescope Data
• New Developments in the FITSIO and Fv Software Packages

... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...

Еще в разделе: (Показать все результаты (>2496) - www.meade.com/ )

• Meade Instruments Corp. - Meade Customer Support