... Apache HTTP Server Version 2.4 . Apache > HTTP Server > Documentation > Version 2.4 > Virtual Hosts . ... IP-based virtual hosting is a method to apply different directives based on the IP address and port a request is received on. ... As the term IP-based indicates, the server must have a different IP address/port combination for each IP-based virtual host . ... In the terminology of Apache HTTP Server, using a single IP address but multiple TCP ports, is also IP-based virtual hosting. ...

When Apache starts, it connects to some port and address on the local machine and waits for incoming requests. By default, it listens to all addresses on the machine, and to the port as specified by the Port directive in the server configuration. ... There are two directives used to restrict or specify which addresses and ports Apache listens to. ... Listen can be used to make a single Apache server listen to more than one address and/or port. ... Syntax: Listen [ port | IP-address:port ] . ...

... Directives | ... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Virtual Hosts . ... Setting up a single daemon with virtual hosts . Name-based Virtual Hosts Support . As the term IP-based indicates, the server must have a different IP address for each IP-based virtual host . ... For each installation, use the Listen directive in the configuration file to select which IP address (or virtual host) that daemon services. e.g. Listen www.smallco.com:80 . ...

Atmospheric influence on the different radio-engineering system functioning . ESTIMATION OF ATMOSPHERIC OPTICAL CHARACTERISTICS AND REMOTELY SANSED IMAGE CORRECTION . ... Direct transmittance estimation results for 12 channels of the spectrometer CHRIS. ... We have managed to develop a direct method of estimating the discrete Normalized Atmospheric Point Spread Function (NAPSF) from available images alone, not using any external sources of information about the atmosphere. ... IRE RAS 1996-20 11 ...

... What is the configuration of the device driver software? ... If the software you use doesn't adequately tell you what's wrong (or automatically configure it correctly) then you need to investigate how your hardware devices and their drivers are configured. ... Another problem is that when you view configuration messages on the screen, it's sometimes not clear whether the reported configuration is that of the device driver, the device hardware, or both. ...

It is important to set this directive to one of the configuration used for this data set. The fit results will be associated with this configuration. Different configurations have different calibrations, and this is why this selection has been introduced for the NPOI 6-station array reduction. The configuration selection acts just like a scan/point selection.

... The timecode of these receivers is sampled via a STREAMS module in the kernel (The STREAMS module has been designed for use with SUN Systems under SunOS 4.1.x. It can be linked directly into the kernel or loaded via the loadable driver mechanism). ... The reference clock support in xntp contains the necessary configuration tables for those receivers. In addition to supporting up to 32 different clock types and 4 devices, the generation a a PPS signal is also provided as an configuration option. ...

Drawing and Part Configuration Management and Release Procedures: . ... Context: This procedure is intended for use by APO Telescope Drafting and Engineering personnel for the development, release and maintenance of telescope related models, drawings, and other controlled documents to facilitate the sharing of information between the various institutions and personnel that have need of technical information and engineering files regarding APO telescope design and development. ... Release Procedure: . ...