Next: Allocating disk space Up: Using Disks and Other Previous: Other tools for the . Not all disks or partitions are used as filesystems. ... Many floppies are used in a tape-drive emulating fashion, so that a tar љ or other file is written directly on the raw disk, without a filesystem. ... It also makes the disks more easily compatible with other systems: for example, the tar љ file format is the same on all systems, while filesystems are different on most systems. ... 2880+0 records in . ...

Next Previous Contents . ... There are filesystems on disk partitions and other devices, and there is the filesystem as it is presented to you by a running Linux system. In Linux, you ``mount'' a disk filesystem onto the system's filesystem. ... A filesystem imposes some structure on this, and makes it look like files within directories within directories.. ... If the power cuts out at this point, the filesystem will be broken. ... Usually, the kernel mounts its root file system read-only. ...

. To make a command alias a permanent part of your working environment: . 1. Edit the shell start up file .kshrc and add the line which defines and exports the command alias. For example: alias a3print='lp -d any -fa3';export a3print . 2. Save the changes and leave the editor. 3. Source the shell startup file to have the changes take immediate effect. For example: .kshrc .

... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Modules . ... Caches a static list of files in memory . ... file_cache_module . ... mod_file_cache caches a list of statically configured files via MMapFile or CacheFile directives in the main server configuration. ... The CacheFile directive of mod_file_cache opens an active handle or file descriptor to the file (or files) listed in the configuration directive and places these open file handles in the cache. ...

CONTENTS: base devs idenet scsi sysvinit base : Basic Linux filesystem package. base : base : Sets up the basic directory structure and adds a few important base : binaries such as GNU mtools 2.0.7, zip201, and unzip512. base : base : base : base : base : base : base : devs : Device files. devs : devs : This package creates special files in the /dev directory that You MUST idenet: install a kernel image in order for your system to boot. ...

... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Modules . ... Caches a static list of files in memory . ... file_cache_module . ... mod_file_cache caches a list of statically configured files via MMapFile or CacheFile directives in the main server configuration. ... The CacheFile directive of mod_file_cache opens an active handle or file descriptor to the file (or files) listed in the configuration directive and places these open file handles in the cache. ...

Additional colormaps can be added to SAOtng by specifying a directory of colormap files with the -cmaps {dir} switch. Each colormap file contains an ASCII list of normalized Red/Green/Blue triplets. ... The colormap name will be the file name (without the .lut extension) and will added to the Color menu. For example, a section of the A colormap file is shown below. The 3 columns correspond to Red, Green, and Blue intensities, respectively. ...

... Tools . ... Version history . ... BusyFit is a stand-alone software for fitting the so-called Busy Function (Westmeier et al. ... GNU less (optional; required for help system) . ... This will unpack all files into a new sub-directory called BusyFit . ... BusyFit is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. ...

Next: Conclusion Up: Image Restoration with Denoising Previous: The Wavelet Transform . As an example of typical results, Fig. 1 shows a simulated HST Wide Field and Planetary Camera (WF/PC I) image of a distant cluster of galaxies. Its construction was described in Freudling and Caulet (1993). ... Further details are to be found in Starck and Murtagh (1993). Another area where the strategy described in this paper works well is when the image background varies. ...

The following pages contain some examples of what you can do with my merge-anim script.. I tried to minimize the size of the images on these pages (all animations are smaller than 50 Kb), but you will probably have to be patient anyway. ... Adding a background to an animation . ... It merges a background (or top) layer with all other layers in an animation. ... I will probably add some options for applying a layer mask to an animation or applying an animated mask to a static layer. ...

OptInt PmWiki : Pm Wiki / Edit Variables . ... When set to '1', turns on the graphical buttons in the "Edit Page" form. # turn on graphical edit buttons . ... When set to '1', enables the "Save draft" button and built-in handling of "draft" versions of pages, where: . ... The suffix to use for draft versions of pages (default "-Draft"). ... The pattern used to determine if a page should be deleted. ... Name of the page (or an array of names) to be used as the default text for any newly created pages. ...

Color separation notes ====================== As an example I took the raw Nikon image file DSC_0100.NEF and processed it with Cinepaint to read all 16 bits in each color. I stored the resultant image as DSC_0100.TIF which is a 16-bit format that ImageJ can read. ... When read in with ImageJ, the color tif file will display as a stack. ... Consequently the usm images are not color shifted from the original, have a less contrast than the hc images, but noticably enhance rays and crater edge detail. ...

... If You Have Neither OS/2 Dual Boot Nor OS/2 Boot Manager -------------------------------------------------------- If you want to remove OS/2 from your computer but want to save the data on your hard disk first, carry out the following procedure: To remove OS/2 and save the data on your computer: 1. ... Back up the data files you want to keep onto floppy disks by using the COPY command. ... Reinsert Setup Disk 1 in drive A (the startup drive). ... Restart your computer by pressing CTRL+ALT+DEL. ...

This document explains how Apache uses the URL of a request to determine the filesystem location from which to serve a file. ... User Directories . URL Redirection . ... the URL http://www.example.com/docs/dir/file.html will be served from /var/web/dir/file.html . ... The module mod_userdir extends this idea to the web by allowing files under each user's home directory to be accessed using URLs such as the following. http://www.example.com/~user/file.html . ...

asncombine -- Process and combine images in one or two NICMOS associations asncombine association . ... set to yes to include error planes in co-added images error. background . ... This is useful to use different background subtractions for different images. fheader . set to yes in order to multiply the background by the value of keyword "factor" in the image header. ... Set to yes to use quadrants statistics save in the image header from previous runs of asncombine. regquad1 . ...

... CoordConv is written in C++ and Python, using SWIG as the C++ wrapper. ... In Python the following will convert an FK5 J2000 position to apparent topocentric coordinates at a specified TAI date: import coordConv taiDate = 4916391905 # TAI date in MJD, seconds site = coordConv . Site (-105.822616, 32.780988, 2788) # Apache Point Observatory 3.5m telescope # For better accuracy you may also specify UT1- TAI and pole wander in site ; # these may be obtained from IERS Bulletin B fk5Sys = ...

XMM-Newton Science Analysis System . ... A parameter Time_Unit could be added to the parameter file. ... Avg, count/s in light-curve FREXP_1 = .. Avg. Frac exposure in light-curve VAROB_1 = ............. / observed variance VAREX_1 = ............. / expected variance THRDM_1 = ............. / third moment MININ_1 = .. ... Chi squared CHI2PR_1= .. ... Error Avg count/s VAROB_E1= .. Error observed variance VAREX_E1= .. Error expected variance CHI2_E1 = .. Error Chi2 RMS_E1 = .. ...

... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...

... To accomplish this, the data model will use a layered design. ... Figure: Layered Design of the ASC Data Model. ... The decision to adopt the ETOOLS package as the generic layer of the implementation of the ASC data model was made because it meets the implementation requirements. ... Standard API Independent of Data Format : Because of the ETOOLS kernel approach, tools and applications designed and implemented on top of the ETOOLS package can access different disk file formats through the same API. ...

Stellarium 0.12.3 . ... StelGeometryBuilder Class Reference . ... buildCircle ( StelVertexBuffer < VertexP2 > *vertexBuffer, const float x, const float y, const float radius, const int segments=128) . ... buildCylinder ( StelVertexBuffer < VertexP3T2 > *const vertexBuffer, const float radius, const float height, const int slices, const bool orientInside=false) . ... Build a fisheye-textured sphere. ... Build a flat texture mapped ring with 3D coordinates (for example for planet's rings) More.. ...