... Release Notes . ... File Formats . ... After downloading the installer file, run it and follow the installation instructions. ... If you expect to use the line identification tool extensively, it is recommended that you download the file below and drop it into the same directory where the other Specview files are. ... If you expect to use the standards library extensively, it is recommended that you download the file below and drop it into the same directory where the other Specview files are. ...

Еще в разделе: (Показать все результаты (>16532) - www.stsci.edu/ )

• Installing from the Source Code Repository GPI Data Pipeline 1.0 documentation
• Libraries
• Directory of Astronomy Librarians and Libraries on the World Wide Web

... autoconf processes configure.in to produce a configure script. configure is a portable shell script which examines the build environment to determine which libraries are available, which features the platform has, where libraries and headers are located, and so on. Based on this information, it modifies compiler flags, generates makefiles, and/or outputs the file config.h with appropriate preprocessor symbols defined. ... Here is a sample configure.in , from a Gnome version of "Hello, World": . ...

Еще в разделе: (Показать все результаты (>3318) - www.sao.ru/ )

• Installing Support Files
• Creating Your Source Tree
• Makefile.am

CIMA is more than just the observing tool - in fact, the observing tool is just a part of a bigger package called the CIMA software package. ... There is also a another package called the CIMA WAPP software which contains the WAPP software, the special Tcl/Tk interpreter used by CIMA and support libraries. ... All CIMA software components recognize the following general options that are part of the CIMA version selection system: . ... The select_cima script can be used to set up a default version. ...

Еще в разделе: (Показать все результаты (>4154) - www.naic.edu/ )

• Chapter 5. Listing of Installed Components
• datataking_software

... Bojan Nikolic web pages (r. 329) . ... The order in which libraries to link to are passed to the linker is important . ... Many libraries use the GNU Autoconf/Automake build toolchain. ... Run the ./configure script, which looks for the various programs and libraries that the package needs . ... The simplest way is to run ./configure and make note of any complaints about missing programs or libraries that it reports. ... Some notes on the GNU toolchain . ... Passing options to configure . ...

Еще в разделе: (Показать все результаты (>3185) - www.mrao.cam.ac.uk/ )

• Building the casa-core libraries Bojan Nikolic web pages (r. 329)
• Download building of the radiospec package Bojan Nikolic web pages (r. 329)
• Building CASA Bojan Nikolic web pages (r. 329)

... The other two libraries, cftisio and wcslib, are essential. Basic Compilation and Installation ---------------------------------- Duchamp can be built and installed on Unix systems by typing ( note that the terminal prompt here is represented by -- don't type this character!): ./ configure make make clean (optional -- to remove the object files from the src directory ) make install This default setup will search in standard locations for the necessary libraries , and ...

Еще в разделе: (Показать все результаты (>21371) - www.atnf.csiro.au/ )

• difx:nativemk5 [ATNF VLBI Wiki]
• Australia Telescope National Facility
• All general documents

... Obtaining the software . ... a. Decide on the root directory where your software is going to go.... /home/friday , for example. b. In your .cshrc file, define . ... home/friday/]lib . ... after make ) an object code library ../pack/qub/libqub.a . ... Then a common section of code, found in ../pack/make_library supplies all the necessary targets: . ... remove The conservative way to build this library is to cd /home/friday/pack/qub; make; make install; make clean . ... cd /home/friday/pack; make . ...

Еще в разделе: (Показать все результаты (>3504) - star.arm.ac.uk/ )

• Software Store - Installing STERNE
• Software Store - Installing SPECTRUM
• Simon's Software - howto 1-3

... Public . Science . ... Science Users Information Libraries jump to navigation jump to content . Science Users Information . ... Observing with ESO Telescopes . ... Publications with ESO Data . ... Science Data Products Forum . ... Use the search interface below to find contact information of astronomy librarians and other astrolibrary-related addresses. The following directory is intended to foster cooperation among astronomy librarians and is not to be used for any commercial purpose. ...

Еще в разделе: (Показать все результаты (>66712) - www.eso.org/ )

• ESO - Common Pipeline Library
• Programmer's reference
• ESO - LISA Conferences

... Retrieve zhtools source and pre- build external library tar files from Web page http://hea-www.harvard.edu/saord/ zhtools cd /pool # where the build files reside wget http://hea-www.harvard.edu/saord/download/ zhtools / zhtools -3.0. tar .gz wget http://hea-www.harvard.edu/saord/download/ zhtools /zhext. tar .gz The zhtools package is available as a source file tar file named zhtools -3.0 Where possible, you probably should retrieve and use this tar file. ...

Еще в разделе: (Показать все результаты (>1973) - hea-www.harvard.edu/ )

• http://hea-www.harvard.edu/PINTofALE/doc/installation.txt
• http://hea-www.harvard.edu/RD/funtools/INSTALL
• High Energy Astrophysics

... In this example we will use /usr/local/data/catalogue for the location of all original catalogues, and /usr/local/scisim-x.y.z for the installation directory of SciSim . ... The installer has to specify their full path in the csim_config section of / usr / local / scisim-x.y.z /config/ scisim .cfg : gsc_regions / usr / local / scisim-x.y.z / data / catalogue /gsc.regions tic_ data / usr / local / scisim-x.y.z / data / catalogue /TICcat.dat wga_ data / usr / local / scisim-x.y.z / data / ...

Еще в разделе: (Показать все результаты (>8638) - xmm.vilspa.esa.es/ )

• XMM-Newton SAS: Software requirements
• XMM-Newton SAS on Mac OS X
• XMM-Newton SAS: Watchout Page

XmCCD ----- The programs provided here offer a Linux graphical user interface to astronomical and scientific CCD cameras. ... SBIG has provided the library used here. It is essentially the same library used by commercial software for control of their cameras under Windows. ... This distribution includes source code to utilize the Santa Barbara Instrument Group (SBIG) shared library libsbigudrv.so with a Motif-based graphical user interface program to control SBIG astronomical CCD cameras. ...

Еще в разделе: (Показать все результаты (>1596) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.2.1/xmccd-4.2.1/libcfitsio/README
• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/README
• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio-3.310/README

... Next: FITS Checksum Verification Up: Data Models and Previous: A Proposed Convention . ... The FITSIO Subroutine Library has been available for 3 years, and has matured into a stable, full-featured interface for reading and writing FITS format files. ... The FITSIO subroutine library for reading and writing FITS files is now three years old and is used by many projects as the standard programming interface for accessing FITS format data files. ...

Еще в разделе: (Показать все результаты (>1992) - www.adass.org/ )

• New Developments in the FITSIO and Fv Software Packages
• GUIDARES: Reading the Guide Star Catalog in Very Many Ways
• ASC Coordinate Transformation -- The Pixlib Library, II

... FileљStructure . ... After downloading all the catalogues, the paths to the various files should look like this: Installation Data Directory / stars / default / stars _0_0v0_1.cat Installation Data Directory / stars / default / stars _1_0v0_1.cat Installation Data Directory / stars / default / stars _2_0v0_1.cat Installation Data Directory / stars / ... In this case, all the files would be in the <Installation Data Directory>/stars/default directory. ...

Еще в разделе: (Показать все результаты (>1275) - astro.uni-altai.ru/ )

• Stellarium: /home/aw/devel/stellarium/trunk/doc/fileStructure.doxygen Source

As of 1.3, the Apache source directories have been re-organised. This re-organisation is designed to simplify the directory structure, make it easier to add additional modules, and to give module authors a way of specifying compile time options or distribute binary modules. ... The non-module source files have moved from src into src/main . ... Configure . ... For example, say it is called mod_demo.c. The archive for this module should consist of two files, in a suitable directory name. ...

Еще в разделе: (Показать все результаты (>117) - neptun.sai.msu.ru/ )

• Apache suEXEC Support
• Compiling Apache for Microsoft Windows
• Compiling and Installing Apache

... There are a lot of computer codes simulating this scattering and freely available in the Internet (see e.g. links on our JPDOC page ). ... The code and input file are available in the directory . ... A slightly modified code of Barber Hill with a C-shell and input files is available in the directory . ... The code, input and test output files are available in the directory . ... See also readme file. file. ... The code, input file and their description (a TeX file) are available in the directory . ...

Еще в разделе: (Показать все результаты (>215) - www.astro.spbu.ru/ )

• Installation of MIDAS

Электронная библиотека астронома-любителя. Книги по астрономии, телескопостроению, оптике. главная . библиотека . ... Общая литература по астрономии . ... Название: Астрономический Календарь - Постоянная часть. Изд. ... Год: 1981. ... сайт служит астрономическому сообществу с 2005 года . ...

Еще в разделе: (Показать все результаты (>298) - www.astrolib.ru/ )

• Электронная библиотека астронома-любителя. Астрономическая литература, книги по
• Электронная библиотека астронома-любителя. Даффет-Смит П. - Практическая
• Электронная библиотека астронома-любителя. Марафон Мессье, 1997.

... Installing on Windows . ... If you prefer, you may install TUI from source and even build your own double-clickable version. ... If you have a fairly uniform set of unix machines to support (i.e. most users running the same flavor of unix), I recommend installing everything (tcl/tk, python, etc.) on a network mountable disk and have people run tui from there. This saves you the trouble of individually installing extra packages to each machine's existing installation of tcl/tk and python. ...

Еще в разделе: (Показать все результаты (>621) - www.apo.nmsu.edu/ )

• Facility.html

README for XFree86 on OS/2 : Installing the System . ... The binary distribution is composed of a number of zip archives which are the executables, servers, fonts, libraries, include files, man pages, and config files. ... the X server for IBM 8514/A and compatible boards . ... the X server for AGX boards . ... the X server for P9000 based boards . ... the X server for S3 based boards (excluding S3 ViRGE) . ... the X server for S3 ViRGE based boards . ... the X server for et4000w32 based boards . ...

Еще в разделе: (Показать все результаты (>6590) - crydee.sai.msu.ru/ )

• XFree86/OS2 Available Ported Software - Libraries
• Adding Variables to CONFIG.SYS
• Index of /ftproot/pub/comp/os/os2/sai/programming/libraries

... To use system calls and library functions in a C program we simply call the appropriate C function (Appendix ). We have already met some system calls when dealing with low level I O - open(), creat(), read(), write() and close() are examples. ... All math functions such as sin(), cos(), sqrt() and random number generators - random(), seed(), lrand48(), drand48() etc. are standard math library functions. NOTE: most standard library functions will use system calls within them. ...

Еще в разделе: (Показать все результаты (>1576) - jet.sao.ru/ )

• C Standard Library Functions
• File and Directory Manipulation
• Directory Manipulation

... Apache HTTP Server Version 2.2 . ... For compiling and installation on Windows, see Using Apache HTTPd with Microsoft Windows . ... make . ... Each section of the compilation and installation process is described in more detail below, beginning with the requirements for compiling and installing Apache HTTP Server. ... The most important option is the location --prefix where the Apache HTTP Server is to be installed later, because Apache HTTPd has to be configured for this location to work correctly....

Еще в разделе: (Показать все результаты (>8762) - www.arcetri.astro.it/ )

• configure - Configure the source tree - Apache HTTP Server
• Index of /science/irlab/doc/library/usb
• Index of /irlab/doc/library/usb

... Set this to where you want bp installed. Choices include: # 1) your standard perl library path, usually /usr/lib/perl. # 2) your site-specific perl library path, often /usr/lib/perl/site_perl # 3) a completely new place, such as /usr/local/lib/bp # 4) leave them here in the source directory # options 3 and 4 will require that the environment variable BPHOME be set # to run any bp programs, but I prefer them. ... BINDEST = /usr/local/bin # This is the prefix that will be used for the perl scripts. ...

Еще в разделе: (Показать все результаты (>282) - hea.iki.rssi.ru/ )

• Other WWW services