... Installation of recent versions has been tested on systems running Solaris, Linux, and OSF/1. ... Create a directory (e.g. tempo11) and cd to it. Download the following files from ATNF (Australia) or Princeton (USA): . tempo.tar.gz: ATNF Princeton . ... gunzip tempo.tar.gz . ... For example, using csh in the directory `/disk1': setenv TEMPO /disk1/tempo11 . ... File output can be very slow, which can cause Tempo to appear to hang near the end of a run, when it is writing the resid2.tmp file. ...

Еще в разделе: (Показать все результаты (>23601) - www.atnf.csiro.au/ )

• Tempo 11 Installation
• VLBI Wiki | PmWiki / PmWiki Installation
• Tools - Software - BusyFit

... Bojan Nikolic web pages (r. 329) . ... Note however that the radiospec is built in the ?build? sub-directory of the directory you installed it to and is not installed ? ... Build radiospec wget http://www.mrao.cam.ac.uk/~bn204/soft/radiospec-1.0.tar.gz tar --strip-components = 1 -xzvf radiospec-1.0.tar.gz PATH = $INSTALLDIR/bin:$PATH scons PKG_CONFIG_PATH = $INSTALLDIR/lib/pkgconfig/ . ... You will at least also need the numpy package for Python . ... Download & building of the radiospec package . ...

Еще в разделе: (Показать все результаты (>1316) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / Backup and Restore
• OptInt PmWiki : PmWiki / PmWiki Installation
• OptInt PmWiki : PmWiki / Initial Setup Tasks

home . ... The information on this page applies to the following DFO operational machines: . ... Home directories for the operational instrument accounts (as well as other important home directories such as quality, flowmgr etc) are served to the DFO Blade nodes and the QC cluster nodes via NFS from hrs01 . ... Since 2008-10-07 , the entire /ots directory structure (i.e. including these two vital home directory systems) is backed up to the Backup Server bu2 using the ONANU.backup script . ...

Еще в разделе: (Показать все результаты (>11087) - www.eso.org/ )

• Homepages of Christian A. Hummel
• OYSTER
• dfosInstall

... As an initial overview, here are the important steps in creating a skeletal Gnome source tree. ... Create a toplevel directory to hold all the components of your application, including build files, documentation, and translations. ... The po directory holds the translation files; gettextize will also create a file called po/Makefile.in.in , used to build the translations. Create a file called po/POTFILES.in listing source files which should be scanned for strings to translate. ... configure.in ...

Еще в разделе: (Показать все результаты (>3274) - www.sao.ru/ )

• Starting the MIDAS Monitor
• Other Programs - Apache HTTP Server
• mod_vhost_alias - Apache HTTP Server

This package contains two libraries of SAS utilities: saslib and sasdal . ... setEmosRejectionMask(TableT table) . ... Directory d("."); . ... class Directory : public list { public: Directory ( const string name = . , const string pattern = * , const bool recurse = false); Directory ( const DirEntry * d, const string pattern = * , const bool recurse = false); void filter( const string pattern); string filter() const ; void recurse( const bool dorecurse); ...

Еще в разделе: (Показать все результаты (>7135) - xmm.vilspa.esa.es/ )

• SciSim 4.0 Installation
• SAS package check list
• XSPEC session thread

... GPI Data Pipeline 1.0 documentation . ... Frequently Asked Questions . ... When trying to start the pipeline, I get the error ?xterm: Can?t execvp idl: No such file or directory? ... Credits for the GPI Pipeline Software Development . ... You can either (1) change your $PATH to include the directory with idl, (2) put a symlink pointing to idl in some directory already in your path, or (3) edit your local copy of the gpi-pipeline script to explicitly set the full path to the idl executable. ...

Еще в разделе: (Показать все результаты (>16642) - www.stsci.edu/ )

• Directories
• Solaris: How to Download, Install, and Start APT
• JWST Workshop VM Installation Guide

... Obtaining the software . ... a. Decide on the root directory where your software is going to go.... /home/friday , for example. b. In your .cshrc file, define . ... home/friday/]lib . ... after make ) an object code library ../pack/qub/libqub.a . ... Then a common section of code, found in ../pack/make_library supplies all the necessary targets: . ... remove The conservative way to build this library is to cd /home/friday/pack/qub; make; make install; make clean . ... cd /home/friday/pack; make . ...

Еще в разделе: (Показать все результаты (>2595) - star.arm.ac.uk/ )

• Simon's Software - howto 1-3
• The /etc directory
• BRUCE: How to...

... Make a new empty directory; you'll need about 6 megabytes; . ... Send some mail to me ( bill@nineplanets.org ) with the URL of your new copy and its physical location so I can update the mirror list; also let me know if you would like to receive email notifications of future updates. ... add some text to describe your site; . ... Several of the mirror sites are using the "mirror" package to keep their copies of TNP up to date automatically instead of waiting for me to send these notices. ...

Еще в разделе: (Показать все результаты (>1468) - www.sai.msu.su/ )

• Adding new plug-ins to The Gimp
• Building and Installing the Distribution
• Line Disciplines and Streams Modules

... Make a new empty directory; you'll need about 6 megabytes; . ... Customize "host.html" as described below (optional); . ... Send some mail to me ( billa@znet.com ) with the URL of your new copy so I can update the mirror list; also let me know if you would like to receive email notifications of future updates. ... Several of the mirror sites are using the "mirror" package to keep their copies of TNP up to date automatically instead of waiting for me to send these notices. ... Mirrors .. ...

Еще в разделе: (Показать все результаты (>391) - www.iki.rssi.ru/ )

... Home About Meade Product Information Dealer Locator Customer Support Investor Relations Dealer Support Employment Opportunities Site Map . Meade Instruments Corp. ... Meade Autostar Supplementary Software Downloads . ... To upgrade your Autostar first click on the link below to download the Autostar Update (ASU) Client Application for Windows. ... The most recent versions of AutoStar Update automatically check for the newest versions of the AutoStar Updater and download it if necessary. ...

Еще в разделе: (Показать все результаты (>2482) - www.meade.com/ )

... phil's idl routines to analyz AO data. The following files can be downloaded via your browser. They are normally tar files with a zipped and unzipped files: . cordmp.tar Uncompressed version (larger) cordmp.tar.gz compressed version (smaller). ... If no file is supplied then the default file hard coded in the cordmp macro is used. compiled with gcc version 2.95.3 20010315 (release). ... Store the file aoIdl.tar in the directory you want to keep the idl routines. ... tar -xf - . ...

Еще в разделе: (Показать все результаты (>3502) - www.naic.edu/ )

• CIMA Software Components
• Chapter 3. Selecting and Downloading the NVIDIA Packages for Your System

... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Programs . Available Languages: en | ... The following programs are simple support programs included with the Apache HTTP Server which do not have their own manual pages. ... You can find them after the configuration process in the support/ directory. log_server_status . ... This perl script will take a combined Web server access log file and break its contents into separate files. ...

Еще в разделе: (Показать все результаты (>8794) - www.arcetri.astro.it/ )

• mod_userdir - Apache HTTP Server
• SDSSmosaic
• Per-user web directories - Apache HTTP Server

... The files in this directory are for installing the latest version 3.0.0 of AstroImageJ on Linux, Windows, and Mac operating systems. ... If you have Java already installed on your system (32-bit or 64-bit), download the following version of AstroImageJ that does not include Java embedded in installation. ... To install AstroImageJ on a 64-bit Windows machine, install the following file which includes the Java 7 64-bit runtime environment ( jre ). ... Run AIJ by double-clicking AstroImageJ.exe. ...

Еще в разделе: (Показать все результаты (>1673) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/astroimagej/installation_packages/AstroImageJ_installation_mac.html
• http://www.astro.louisville.edu/software/astroimagej/astroimagej_20120722/A_README_AIJ
• http://www.astro.louisville.edu/software/astroimagej/astroimagej_20110724/AIJ_README

... To install PINTofALE: 0. If all you need are the IDL procedures, download and unpack http://hea-www.harvard.edu/PINTofALE/PoA_pro_current.tar.gz and add the location to IDL's !PATH. ... Assuming that PINTofALE will be installed in the directory /foo/bar/, type cd /foo/bar/ gunzip -c PoA_current.tar.gz | ... One possible method is to include the following (or equivalent) in your $HOME/.cshrc setenv PINTofALE /foo/bar/PINTofALE if ( $?IDL_PATH ) setenv IDL_PATH +$PINTofALE/pro\:${IDL_PATH} if (! ...

Еще в разделе: (Показать все результаты (>2331) - hea-www.harvard.edu/ )

• How to Use a BDF font with X11
• Changes for release 1.8
• The Images Menu

Software Development: ST-ECF IRAF Package : Installation instructions . ST-ECF quit 2) Create a directory to contain the STECF external package files. ... 3) Log in as IRAF and edit the extern.pkg file in the hlib directory to define the package to the CL. From the IRAF account, outside the CL, you can move to this directory with the command: % cd $hlib Define the environment variable stecf to be the pathname to the stecf root directory. ... Maintained by Richard Hook Richard.Hook@eso.org ...

Еще в разделе: (Показать все результаты (>230) - www.stecf.org/ )

... index.php (1) | bbclone/ | ... To do you can use the following sample and point your browser to it. <?php define("_BBC_PAGE_NAME", "Test"); define("_BBCLONE_DIR", "bbclone/"); define("COUNTER", _BBCLONE_DIR."mark_page.php"); if (is_readable(COUNTER)) include_once(COUNTER); ?> ... Create the file "count.php" and add the following: <?php define("_BBCLONE_DIR", "/the/path/that/leads/to/bbclone/"); define("COUNTER", _BBCLONE_DIR."mark_page.php"); if (is_readable(COUNTER)) include_once(COUNTER); ?> ...

Еще в разделе: (Показать все результаты (>651) - hea.iki.rssi.ru/ )

I. Installation . ... AMPLE package distributive (created with program InstallShield for Microsoft Visual C++) has been downloaded on FTP server of IAA RAS as archive Ample.zip. ... Note: If the window "file download" appears, select Open... switch button, then press OK button. ... The shortcut for AMPLE will be linked with this folder, and auxiliary files will be created here during AMPLE work. ... When running AMPLE all auxiliary and new configuration files are created in the WORK folder. ...

Еще в разделе: (Показать все результаты (>428) - www.ipa.nw.ru/ )

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

Еще в разделе: (Показать все результаты (>167) - lnfm1.sai.msu.ru/ )

... File Structure . ... After downloading all the catalogues, the paths to the various files should look like this: Installation Data Directory / stars / default / stars _0_0v0_1.cat Installation Data Directory / stars / default / stars _1_0v0_1.cat Installation Data Directory / stars / default / stars _2_0v0_1.cat Installation Data Directory / stars / ... In this case, all the files would be in the <Installation Data Directory>/stars/default directory. ...

Еще в разделе: (Показать все результаты (>681) - astro.uni-altai.ru/ )

• Stellarium: /home/aw/devel/stellarium/trunk/doc/fileStructure.doxygen Source
• Stellarium: Plugins
• Stellarium: /home/aw/devel/stellarium/trunk/plugins Directory Reference

. To copy a file from another directory to your current directory give the pathname to the source file followed by the name of the destination file. cp path_to_source_file destination . For the destination file to have the same name as the source file use: cp path_to_source_file . The . (dot) is shorthand for the current working directory. Examples . Problems? . Did You Know? .

Еще в разделе: (Показать все результаты (>456) - comet.sai.msu.ru/ )

• Copying files to another directory
• Useful ftp commands
• Did You Know?