... Apache HTTP Server Version 2.2 . ... Apache is configured by placing directives in plain text configuration files. ... Any directive may be placed in any of these configuration files. ... Apache configuration files contain one directive per line. ... Directives placed in the main configuration files apply to the entire server. ... The server administrator further controls what directives may be placed in .htaccess files by configuring the AllowOverride directive in the main configuration files. ...

Еще в разделе: (Показать все результаты (>1972) - www.arcetri.astro.it/ )

• Kernel Configuration and Makefile Structure
• Kernel Makefile Configuration: how?
• Kernel configuration

... Scope of Directives .htaccess Files . ... Apache is configured by placing directives in plain text configuration files. ... Any directive may be placed in any of these configuration files. ... Apache configuration files contain one directive per line. ... Directives placed in the main configuration files apply to the entire server. ... The server administrator further controls what directives may be placed in .htaccess files by configuring the AllowOverride directive in the main configuration files....

Еще в разделе: (Показать все результаты (>96) - neptun.sai.msu.ru/ )

• Server-Wide Configuration
• Apache module mod_info

... Directives | ... Apache HTTP Server Version 2.2 . ... This document describes the files used to configure the Apache HTTP server. ... Scope of Directives .htaccess Files . ... Apache is configured by placing directives in plain text configuration files. ... Directives placed in the main configuration files apply to the entire server. ... The server administrator further controls what directives may be placed in .htaccess files by configuring the AllowOverride directive in the main configuration...

Еще в разделе: (Показать все результаты (>414) - www.sao.ru/ )

• Instrument configuration and run-specific information
• Server-Wide Configuration - Apache HTTP Server
• Upgrading to 2.2 from 2.0 - Apache HTTP Server

CIMA configuration files offer You a conveniant way of saving CIMA set-ups to files. ... Then instead of making this selections interactively when You are observing, You can just load and apply the configuration files. ... Any other set-up will be ignored! ... In that case, You are forced to use the 'Load only' option to load the configuration file, inspect the selected set-up carefully, apply the set-up (with the 'Accept' or 'Apply' buttons) and then save a new version of the configuration file. ...

Еще в разделе: (Показать все результаты (>629) - www.naic.edu/ )

• NOISE DIODE CONFIGURATION
• Manually Editing the Configuration File
• Part I. Installation and Configuration Instructions

... CREATE FULLTEXT CONFIGURATION -- create full-text configuration . CREATE FULLTEXT CONFIGURATION cfgname PARSER prsname [ LOCALE localename ] [ AS DEFAULT ]; CREATE FULLTEXT CONFIGURATION cfgname [ { PARSER prsname | ... PARSER . ... LOCALE . ... Create new configuration test with default parser and ru_RU.UTF-8 locale. CREATE FULLTEXT CONFIGURATION test PARSER default LOCALE 'ru_RU.UTF-8'; =# \dF+ test Configuration "public.test" Parser name: "pg_catalog.default" Locale: 'ru_RU.UTF-8' Token | ...

Еще в разделе: (Показать все результаты (>211) - www.sai.msu.su/ )

• FTS Configuration
• ALTER FULLTEXT CONFIGURATION
• Configuration Options

... Edit . ... Summary: Site Configuration:) Here you find some links to Site configuration and administration pages. Add links to other pages you may need for your site's configuration here, as necessary. ... The Site group contains configuration pages, and the SiteAdmin group contains administrative pages. ... All pages in the 'Site' group (except Site.Side Bar ) are locked for editing as the default. ... All pages in the ' SiteAdmin ' group are locked for reading and editing as the default. ...

Еще в разделе: (Показать все результаты (>1673) - www.atnf.csiro.au/ )

• difx:configuration [ATNF VLBI Wiki]
• Dealing with Formatter Reconfigurations
• PPTA Wiki | Site / Site Configuration

... trendPlotter tool . ... There is the option for using a non-standard tool configuration instead of config.trendPlotter. ... A typical application of special configuration is the WISQ web site. ... observing/dfo/quality/WISQ/HEALTH/header_WISQ.html . ... observing/dfo/quality/WISQ/HEALTH/navbar_WISQ.html . ... optional; display the product section (default: YES) . ... Furthermore some standard configuration keys can be filled in a non-standard way. ... http://www.eso.org/observing/dfo/quality/ WISQ ....

Еще в разделе: (Показать все результаты (>947) - www.eso.org/ )

• System configuration
• Load configuration, tables, and logs
• Loading configuration and logs

... Here you find some links to Site configuration and administration pages. Add links to other pages you may need for your site's configuration here, as necessary. ... The Site group contains configuration pages, and the SiteAdmin group contains administrative pages. ... All pages in the 'Site' group (except Site.Side Bar ) are locked for editing as the default. ... Page Actions Contains the ' action ' links (like Browse, Edit, History, etc.), placed at the top of the page, see site page actions . ...

Еще в разделе: (Показать все результаты (>337) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : Site Configuration
• OptInt PmWiki : Site Configuration | Attach
• OptInt PmWiki : Site Configuration | History

... Meta Index / Home Page / Output Files / Summary File specification from After each exposure record there will be an instrument configuration record. If the exposure record describes an OM exposure then the instrument configuration record will be an OM Configuration Record. The record will detail the instrument configuration in terms of the instrument programmable parameter values obtained from the proposal information. ... Note . ... Identifies the record as an OM Configuration Record. ...

Еще в разделе: (Показать все результаты (>496) - xmm.vilspa.esa.es/ )

• EPIC MOS Configuration Record
• EPIC p-n Configuration Record
• RGS Configuration Record

... A modern driver for a device will find out the bus-resource configuration without you having to tell it anything. ... In the worst case you must hard-code the bus-resources into the kernel (or a module) and recompile. In the middle are cases such as where you run a program to give the bus-resource info to the driver or put the info in a configuration file. ... You give such bus-resources as a parameter to the kernel or to a loadable module. ... Setserial is often run from a start-up file. ...

Еще в разделе: (Показать все результаты (>161) - jet.sao.ru/ )

• Installation and Configuration
• Plug-and-Play-HOWTO : What Is My Current Configuration?
• Plug-and-Play-HOWTO

... GPI Data Pipeline 1.0 documentation . ... GPI Data Pipeline Installation & Configuration . ... GPI Data Pipeline Documentation . ... This chapter describes how to install the GPI data pipeline and configure it. Some details of pipeline installation depend upon your operating system. ... If you already have IDL, the quickest route is to download the latest source ZIP file , unzip it into your $IDL_PATH , and configure your path settings . ... Version 1.0.0 . ... Starting the GPI Data Pipeline . ...

Еще в разделе: (Показать все результаты (>3185) - www.stsci.edu/ )

• WFPC2 Configurations
• Instrument Configuration [Config]
• DrizzlePac: Configuration File Primer

... ISC Kosmotras . ... Dnepr Cluster Mission 2013 19 June 2014. ... Mission profile SHM configuration Reliability Dnepr LV Performance Launch Sites . ... Depending on requirements of a specific launch mission, ISC Kosmotras offers several configurations of the Dnepr Space Head Module (SHM), where customer s payload will be accommodated. ... The SHM configuration is selected based on the type of the launch mission: dedicated, cluster (multiple small satellite) or shared (primary payload and a piggyback)...

Еще в разделе: (Показать все результаты (>95) - www.kosmotras.ru/ )

• ISCK documents

Настройка PPP . ... Если хотя бы одно PPP-соединение уже определено, в появившемся окне "кликнуть" иконку "Новое соединение". Должно появиться новое окно.. ... Нажать в появившемся окне "закладку" "Параметры", далее в нем установить параметр "Выводить окно после набора номера" в "ON" ("галочку" поставить). Нажать" .. ... Если ему удасться таки до него дозвониться, то на экране должно появиться окно, в котором необходимо нажать клавишу: "Enter" . ... На это в окне должно появиться: . ...

Еще в разделе: (Показать все результаты (>19) - lnfm1.sai.msu.ru/ )

SUPPLEMENTAL INFORMATION . Seasons, phases of the Moon, eclipses, configurations . 2015: Seasons 2015: Coefficients of the Tchebyshov polynomials, the Moon 2015: Phases of the Moon , perigee and apogee 2015: Eclipses 2015: Configurations of the Sun, Moon and planets ------- 2014: Seasons 2014: Coefficients of the Tchebyshov polynomials, the Moon 2014: Phases of the Moon , perigee and apogee 2014: Eclipses 2014: Configurations of the Sun, ...

Еще в разделе: (Показать все результаты (>83) - www.ipa.nw.ru/ )

• AY2006 (preface)

... Mp3Mixer Mode . LiveIce configuration can either be set using configuration files or by setting command line parameters at runtime. The LiveIce binary has a series of reasonable default options set in the binary - in particular liveice.h has a #define which can be used to set the default encoder. ... Server Options . ... Note that some encoders can't do less thatn 32kHz andsome will change your format to something else if the ideal format for a given bitrate is of a lower quality. ...

Еще в разделе: (Показать все результаты (>168) - star.arm.ac.uk/ )

• Armagh Observatory Calver Telescope
• The /etc directory

Drawing and Part Configuration Management and Release Procedures: . ... Context: This procedure is intended for use by APO Telescope Drafting and Engineering personnel for the development, release and maintenance of telescope related models, drawings, and other controlled documents to facilitate the sharing of information between the various institutions and personnel that have need of technical information and engineering files regarding APO telescope design and development. ... Release Procedure: . ...

Еще в разделе: (Показать все результаты (>107) - www.apo.nmsu.edu/ )

• TUI:Instruments:NICFPS:NICFPS window
• TUI:Instruments:DIS:DIS window
• TUI:Instruments:Echelle:Echelle window

Computer Ephemeris for 2014 from DE200/LE200. Planetary configurations. Sorted by event. ...

Еще в разделе: (Показать все результаты (>22) - space.univ.kiev.ua/ )

• Planetary configurations sorted by event for Computer Ephemeris for 2015
• Planetary configurations sorted by event for Computer Ephemeris for 2016
• Planetary configurations sorted by time for Computer Ephemeris for 2014

... A system to efficiently control and manage the software development of a large project is presented. The overall design, implementation and use of the configuration control system ( CoCo ) and the calibration database ( CalDB ) used for off-line software development of the Short Wavelength Spectrometer (SWS) in the Infrared Space Observatory ( ISO ) is described. ... The CoCo system is capable of efficiently controlling the development of the IA 3 software. ...

Еще в разделе: (Показать все результаты (>393) - www.adass.org/ )

• ASC Coordinate Transformation -- The Pixlib Library, II
• CICADA - Configurable Instrument Control and Data Acquisition
• Subaru Telescope ARchive System (STARS), Current Status and Future Work

Microsoft Developer Studio Generated NMAKE File, Based on cfitsio.dsp !IF "$(CFG)" == "" CFG=Win32 Release !MESSAGE No configuration specified. ... Win32 Release" "$(CFG)" != ... End Custom Macros ALL : $( OUTDIR )\ cfitsio.dll CLEAN : -@ erase $( INTDIR )\buffers.obj -@ erase $( INTDIR )\cfileio.obj -@ erase $( INTDIR )\checksum.obj -@ erase $( INTDIR )\drvrfile.obj -@ erase $( INTDIR )\drvrmem.obj -@ erase $( INTDIR )\editcol.obj -@ erase $( INTDIR )\edithdu.obj -@ erase $( ...

Еще в разделе: (Показать все результаты (>94) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio-3.310/winDumpExts.mak
• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/optec/INSTALL
• http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio/winDumpExts.mak

README for XFree86 on OS/2 : Adding Variables to CONFIG.SYS . ... ETC . Set to an ETC directory. Normally, this is already set to the ETC directory of the TCP/IP code, such as SET ETC=C:\TCPIP\ETC For Warp 4 and later, this may point to the \MPTN\ directory. ... Normally you will set this variable to the same value as the HOSTNAME variable and simply add a :0.0 after it, such as SET DISPLAY=myhost:0.0 Read the X11 man page on the exact meaning of these postfixes and other options. ...

Еще в разделе: (Показать все результаты (>174) - crydee.sai.msu.ru/ )

• Remarks on the Network Configuration
• README for XFree86 on OS/2
• XFree86/OS2 mailing list