Next: The Distributed Analysis System Hierarchy (DASH) for the SUBARU Telescope . ... The REMOT project objective is to develop and validate a generic approach to allow remote control of scientific experiments and facilities that require real time operation and multimedia information feedback. ... These have been partly implemented to perform a set of demonstrations, showing the feasibility of the design. ... Integrating the control system of the Galileo telescope in the REMOT project is simple: . ...

... Science . ... Science Users Information > Observing Facilities > Instrumentation Development > VLT/Instrument Interfaces . ... APEX Visitor Instrument . ... The interfaces between the VLT Unit Telescopes and the scientific instruments to be operated at the VLT Cassegrain, Nasmyth and Coudц© foci are well defined. ... Interface and numerous other relevant information for instrument builders is available in the "Requirements for Scientific Instruments on the VLT Unit Telescopes" , ESO doc. no. ...

Slithead identification (which slithead is installed?) will be sensed and reported by the on-board spectrograph computer. ... Observer's software to handle spectrographic observations will be written by JHU and installed on the Fermilab supplied observatory workstation. ... UW will be responsible for the slithead latch-down control. ... Database computer at APO: The observer's software will query the observatory database for information on the currently installed fiber cartridge. ...

Draft document on dynamic scheduling - Tony Wong, ATNF 12 Nov 2001 ====================================================== Dynamic scheduling adjusts the observing schedule in real time according to system status and observing conditions. ... A PROPOSAL FOR IMPLEMENTING DYNAMIC SCHEDULING AT ATCA ------------------------------------------------------ Observing: ---------- 1. ... Obviously the number of such projects should be minimised for dynamic scheduling to be effective. ...

... CIMAFITS is the name for the Arecibo FITS-file format. ... This is a list of (fairly) up-to-date documents describing CIMA and CIMAFITS: . The CIMA version history log which is the most up-to-date page listing all changes made to the different versions of CIMA . ... The CIMA user's log which chronologically lists changes made to CIMA that may be relevant to an observer. The CIMA engineering log which lists engineering changes made to CIMA that probably are of less interest to an observer. ...

The Linear Ramp Filters (LRFs) provide a narrow band ( ) imaging capability which is continuously tunable from 3710е to 9762е. These are essentially a collection of narrow band interference filters whose central wavelength varies with position on the filter glass. ... If it is necessary to know which CCD will be used, observers can consult Table 3.7 or Table 3.8 , or use the on-line LRF calculator tool on the WFPC2 WWW pages. ... See Linear Ramp Filters for further details on LRFs.) ...

... Description(Russian): [ HTML ] [ PDF ] . ... 2002 : source L A T E X and export to [ HTML ], [ PDF ], [ PS ], [ OpenOffice ], [ MSWord ] . 2003 : source L A T E X and export to [ HTML ], [ PDF ], [ PS ], [ OpenOffice ], [ MSWord ] . 2004 : source L A T E X and export to [ HTML ], [ PDF ], [ PS ], [ StarOffice ], [ MSWord ] . 2005 : source L A T E X and export to [ HTML ], [ PDF ], [ PS ], [ StarOffice ], [ MSWord ] . ... 2014 : source HTML and export to [ PDF ], [ MSWord ], [ ODT ] . ...

... Iowa Robotic Telescope | ... Talon is based on OCAAS, a software suite developed by software engineer Elwood Downey ( Clear Sky Institute ) for use at the University of Iowa ?s first remote facility (the ATF, or Automated Telescope Facility). ... XObservatory : Telescope Control Interface . ... This program calls upon and coordinates much of the interrelated portions of the Talon architecture, and forms the primary control panel for the telescope, dome, and peripheral systems when used locally. ...

Astronomical Data Analysis Software and Systems VII ASP Conference Series, Vol. ... The REMOT project objective is to develop and validate a generic approach to allow remote control of scientific experiments and facilities that require real time operation and multimedia information feedback. ... Introduction As a response to the increasing need for remote control of large scientific in­ stallations, the REMOT (Remote Experiment MOnitoring and conTrol) project was initiated in 1995. ...

OptInt PmWiki . Pm Wiki / . ... Wiki Style Examples . Wiki styles | ... PmWiki uses WikiStyles for styling text with color and other attributes. PmWiki 2.0 introduced the ability to control the styling further and to even place styles on blocks. ... In addition, an author can define a style "shortcut" by using the define= property. For example, to define a style of %red% , one can use: . define=mystyle color=red% Here is some %mystyle% red text created using a style shortcut. ...

The electronics of LonGSp is composed of two main parts: "upper" electronics, that is situated near the instrument, and the "lower" electronics, put in the control room. ... There is also the main electronics box that contains the amplifiers and the A/D converters for the four output signals from the detector, the sequence memory which generates the proper timing clocks, and a logic for converting the 16-bit parallel data from the array to a serial format. ...

... Meade Instruments Corporation . ... Autostar Computer Controllers . 497 Autostar . ... One of the most important advances in telescope control in the past 25 years, the Meade #497 Autostar Computer Controller turns the ETX into an automatic celestial object locating system. ... The #497 Autostar Computer Controller plugs into the control panel of ETX-90EC, ETX-105EC, and ETX-125EC telescopes and enables automatic location of more than 30,000 celestial objects. ... about meade | ... Meade 4M | ...

XmTel uses the XPA interface for extensible connection to the operating system and scripting. ... Support for several commercial telescopes and controllers under Linux .. ... Software Bisque Paramount ME (requires RTS2 library) . ... In the current version of XmTel .. ... Offers command line and scripted operation using XPA . ... Version 7 includes the XPA server, telescope drivers, a client, utility software, and a standalone option that does not use XPA. ... Previous versions and support for INDI . ...

XMM-Newton Science Analysis System Page: 1 siamgen July 2, 2008 Abstract siamgen generates the Star Tracker / Instrument Alignment Matrices (SIAMs) for the instruments EMOS1 , EMOS2, EPN, RGS1, RGS2, and OM as speci ed in the Interface Control Document [2] 1 Instruments/Modes Instrument Mode all except ERM all 2 Use pipeline processing no interactive analysis no CCF maintenance yes 3 Description siamgen generates the ...

... Created: 23 February 2001 . ... SOFTWARE MAINTENANCE MANUAL . ... 9 January 2001 . ... Note: in the final document, the table of contents will be to third level] . The Software Maintenance Manual describes the procedures for installation and maintenance of the software for the Gemini Near-infrared Integral Field Spectrograph (NIFS). ... Section 19.4.3 of the document “Programmatic Requirements for Gemini Instrumentation Development” states the requirements for the Software Maintenance Manual . ...

... For reducing data from ESO instrumentation it is assumed that the FITS headers conform the standards set by the document ``ESO Archive, Data Interface Requirements''. ... As an example, in the ESO case the exposure type is stored in the ESO hierarchical FITS keyword `HIERARCH ESO GEN EXPO TYPE'. ... To fill the CCD keywords with the telescope and instrument setup parameters, like name of the telescope, CCD used, read-out noise, frame size, etc. the command LOAD/CCD can be used. ...

... Exposure Time Calculator (ETC) . ... ESO - Public Surveys . ... the recommended values to use for DIT, . ... Detector on-chip integration (DIT): seconds. to your chosen value - a separate page gives recommended values to use for DIT - for modes 1 and 2 below you may wish to start with the maximum recommended values as these will minimize the effect of read noise (a total object exposure of Y secs with DIT=X secs will produce Y/X lots of read noise) and give you a lower limit on the time needed. ...

... Automatic real-time control of scientific instruments and/or operational units, data processing, storage and transfer. ... This PC104-based device is a robust real-time control system of high reliability and readiness with possibility of embedding. QNX operational system allows using sophisticated software, multitasking, TCP/IP protocols and modern friendly user interface. ... Ilya Chulkov, Head of laboratory +7(495)333-45-23, http://lex.iki.rssi.ru , ilya@hea.iki.rssi.ru . ...

Lessons learned from the Thirty Meter Telescope site testing Tony Travouillon Sebastian Els, Angel Otarola, Reed Riddle, Matthias Schoeck, Warren Skidmore TMT.XXX.PRE.05.0XX.DRF01 1 Introduction TMT and its Site testing. Important choice before going on site. ... Considerations during analysis of the data. TMT.XXX.PRE.05.0XX.DRF01 2 Some Background about the TMT Site Testing TMT is a 30m, segmented, RitcheyChretien telescope design. ... ASCA Cloud Cover Analysis So how do we do it in practice? ...

RADIOASTROPHYSICAL DEPARTMENT • INSTITUTE OF SOLAR-TERRESTRIAL PHYSICS RAS SB . ... SSRT - Receiving systems . The SSRT has two independent receiving systems for recording solar observational data, and several ancillary receivers for checking, setting up and adjusting the instrument. The base receiving systen is a multichannel filter receiver for a simultaneous recording in 180 channels with the 500 kHz band each, adjusted at steps of about 600 kHz. ... Channel's band . ...