... select data groups menu . activate fields (radio buttons) to qualify the query . ... select menu option to record query selections, enter a unique report option name and save option . ... select Visit Data menu from data groups menu . ... select LRP menu from data groups menu . activate LRP name "query" radio button and select LRP 02035A from automatically activated dropdown menu . ... select LRP menu from data groups menu and select LRP 02036A from automatically activated dropdown menu . ...

Еще в разделе: (Показать все результаты (>18623) - www.stsci.edu/ )

• CALCOS v2.8.2 Release Notes
• HST Focus Model

... There are number of features that can be set by the user in the Sparkle Dialog box. ... The Sparkle plug-in computes the luminosity (level of whiteness) of each pixel in the image (the user can see this when the progress window labeled Generating luminosity array... is displayed). ... The threshold value is currently a slider/text field pair which have a precision of .0001. ... Like the Threshold value, the Flare Intensity has both a slider and a text input field for specifying its value. ...

Еще в разделе: (Показать все результаты (>1939) - www.sai.msu.su/ )

This panel adds a pointing error measuring (and possibly correcting) sequence to your slew. ... Log Error measure the pointing error and log it to the current pointing error file (which must already have been opened with the TCC command PTERR OPEN=filename ; this command is not presently supported by TUI, but you can enter manually at the log window; be sure to also issue PTERR CLOSE when you are done logging data). ...

Еще в разделе: (Показать все результаты (>878) - www.apo.nmsu.edu/ )

• TUI:Telescope:User Catalogs
• TUI:Telescope:Slew Window:Options:Drift Scan
• TUI:Telescope:Slew Window:Options:Mag PM

filter1d - Time domain filtering of 1-D time series filter1d [ infile ] -F < type >< width > [ -D increment ] [ -E ] [ -H [ nrec ] ] [ -I ignore _ val ] [ -L lack _ width ] [ -N n _ cols / t _ col ] [ -Q q _ factor ] [ -S symmetry _ factor ] [ -T start / stop / int ] [ -V ] [ -bi [ s ][ n ] ] [ -bo [ s ] ] filter1d is a general time domain filter for multiple column time series data. The user specifies the number of columns of input and which column is the time. ...

Еще в разделе: (Показать все результаты (>798) - xray.sai.msu.ru/ )

• http://xray.sai.msu.ru/~ivan/gmt/man/spectrum1d.html
• http://xray.sai.msu.ru/~ivan/gmt/man/grdtrack.html
• http://xray.sai.msu.ru/~ivan/gmt/man/fitcircle.html

... This chapter discusses values that JavaScript recognizes and describes the fundamental building blocks of JavaScript expressions: variables and literals. ... So, for example, you could define a variable as follows: . var answer = 42 And later, you could assign the same variable a string value, for example, . ... These are fixed values, not variables, that you literally provide in your script. ... A string literal is zero or more characters enclosed in double ( " ) or single ( ' ) quotation marks. ...

Еще в разделе: (Показать все результаты (>2525) - www.sao.ru/ )

• Example
• In Case of Trouble
• Standard values

. To display the current value of all options enter the command: :set all . To display the value of those options whose values have been reset from their default enter the command: :set .

Еще в разделе: (Показать все результаты (>307) - comet.sai.msu.ru/ )

• Change an option value temporarily
• Fill-Out Forms
• Change an option value permanently

corstripch - interim correlator total power stripchart plotter corstripch {-c -f filename -h -m numpnts -s -v1 min max -v2 min max} . c use calfile as default file (instead of corfile) . ... v2 min max set min ,max plot values for lower display . ... command function . ... v1 min max new min,max for top window (no commas) . v2 min max new min,max for bottom window (no commas) . ... As new . ... To replot in the new window, use the r command of the interactive menu. return to: filter_programs . ...

Еще в разделе: (Показать все результаты (>3215) - www.naic.edu/ )

• Manpage of FFTFILTER
• ALFA Performance at 1665 MHz
• measured_operating_values

... Field size . Object name . ... Map size . ... Field size: the approximate size of the map in the Y direction. ... Galaxies: . ... Galaxies, which size exceeds some value depending on the field and map sizes, are displayed with their real positional angles and sizes by 25m isophote. ... In the "tools" fields there are links to the several famous AVO (Astrophysical Virtual Observatory) resources: NED and Simbad databases and DSS2 (Palomar Digitized Sky Survey) images of the corresponding sky area. ...

Еще в разделе: (Показать все результаты (>44038) - www.astronet.ru/ )

Program: MOMENTS Purpose: Program to calculate moments and other properties of a profile Category: MANIPULATION, CALCULATION, PROFILES File: moments.c Author: M. Vogelaar Keywords: INSET= Give set (, subsets): Maximum number of subsets is 2048. ... 3: Physical coordinate of peak value in profile. ... If there are a certain number of adjacent subsets with amplitudes within the given range, and this number of subsets is greater than or equal to WINDOW, these sub- sets are taken into account. ...

Еще в разделе: (Показать все результаты (>14298) - www.atnf.csiro.au/ )

• kpvslice: interactive position-velocity slicing
• Listing Image Values
• mirflag

There are various kinds of generic information you can retrieve about an XPA access point by using the xpaget command. ... Each XPA access point supports a number of reserved sub-commands that provide access to different kinds of information, e.g. the access control for that access point. ... acl get (set) the access control list [options: host type acl, for set] . ... This access point is available only on the server machine. -env get (set) an environment variable [options: name (value, for set)] . ...

Еще в разделе: (Показать все результаты (>3827) - hea-www.harvard.edu/ )

• Mapping Pixel Values to Screen Intensity
• The XImtool Control Panel
• The SAOimage Menu (options within SAOimage)

... These values are functions of the geographical (geodesic) latitude and the height of the point above the sea level. ... The option also permits to solve the reverse problem — to calculate approximate values of observatory latitude and its height above the sea level depending on the introduced values of dxy and dz. ... It should be mentioned that low precision of dxy and dz for some observatories in the list maintained by MPC leads to negative value of height above the sea level for some of them. ...

Еще в разделе: (Показать все результаты (>476) - www.ipa.nw.ru/ )

• Values of asteroid masses

. XMM-Newton Science Analysis System . imrebin (tools-1.61.1) [xmmsas_20050815_1803-6.5.0] . Meta Index / Home Page / Description . Three options are available: . newvaluestyle =`sum': the values of the corresponding input pixels are simply added. newvaluestyle =`average': the values of the corresponding input pixels are averaged. newvaluestyle =`rms': the output value is calculated as the root mean square of the cooresponding input pixels. XMM-Newton SOC/SSC -- 2005-08-16

Еще в разделе: (Показать все результаты (>15637) - xmm.vilspa.esa.es/ )

• Output Files
• Description

DIGITAL WDC EXCHANGE FORMAT . FOR OBSERVATORY 1.0 MINUTE VALUES 1. ... DATA-1 .. DATA-60 are 1-minute values of the given element for that hour. ... Typically, digital 1-minute values received by WDCs from organizations operating automatic magnetic observatory instruments are averages of more frequendy sampled values, e.g. 10-second point samples. ... If the method used to obtain 1-minute average values is important to a user, the WDC will assist in determining the exact procedure applied. ...

Еще в разделе: (Показать все результаты (>1159) - www.iki.rssi.ru/ )

... Clicking on PLOT S CREEN will display the plot. At this stage, you can fit functions to the data ( FIT : the residuals are plotted and can be manually edited), enter a new plot range (R ANGE : enter 0,0 for automatic scaling) or by defining a window (W INDOW : click left button to anchor upper left corner, click middle button fix size and shift box, click left button again to fix position or right button to select automatic scaling and exit), identify ...

Еще в разделе: (Показать все результаты (>47290) - www.eso.org/ )

• OYSTER Lab
• The data selection widget
• ESO - How do I interpret the SEQ TIME keyword values?

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

Еще в разделе: (Показать все результаты (>303) - lnfm1.sai.msu.ru/ )

... FIELD | ... public class Menus . ... ImageJ . ... static char . ... static int . ... Returns the size (in points) used for the fonts in ImageJ menus. static java.lang.String . ... Returns a list of the plugins in the plugins menu. static java.lang.String . ... Field Detail public static final char PLUGINS_MENU . ... public static final char IMPORT_MENU . ... public static int installPlugin (java.lang.String plugin, char menuCode, java.lang.String command, java.lang.String shortcut, ImageJ ij) . ...

Еще в разделе: (Показать все результаты (>507) - www.astro.louisville.edu/ )

• RoiDecoder (ImageJ API)
• PlotWindow (ImageJ API)
• Wand (ImageJ API)

... file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout us ...

Еще в разделе: (Показать все результаты (>299) - observ.pereplet.ru/ )

... Here is an example of the output header of CATS data. ... SIMPLE=T / BITPIX=8 / character information NAXIS=0 / no image data array present EXTEND=T / may be standard extensions OBJECT= CATS SEARCH / CATS search result ORIGIN=SAO RAS DATE=01/01/1997 / date of file creation END XTENSION=TABLE / F-file table extension BITPIX=8 / 8-bits ... NAXIS1=93 / No. of characters per row NAXIS2=1000 / the number of lines (sources) TFIELDS=10 / there are 16 fields per row EXTNAME= CATS / object name: ...

Еще в разделе: (Показать все результаты (>1033) - jet.sao.ru/ )

• swap.c
• Advanced Pointer Topics
• Access via e-mail

... A Hidden object is used for passing name/value pairs when a form submits. ... JavaScript 1.0 . JavaScript 1.1: added type property The HTML INPUT tag, with "hidden" as the value of the TYPE attribute. ... Property . ... The form contains a "Display hidden value" button that the user can click to display the value of the Hidden object in an Alert dialog box. ... P><INPUT TYPE="button" VALUE="Display hidden value" NAME="button2" . ... Form name:<INPUT TYPE="hidden" NAME="h1" VALUE="Beluga"> . ...

Еще в разделе: (Показать все результаты (>8761) - www.arcetri.astro.it/ )

• Apache 2.0 Hook Functions - Apache HTTP Server
• Hook Functions in the Apache HTTP Server 2.x - Apache HTTP Server
• Client-Side JavaScript Guide

... Simple use of pointers . ... Allocation of arrays using pointers . ... REAL, TARGET :: B(10,10) REAL, POINTER :: A(:,:) A => B The matrix B has been specified completely, i.e. with the dimensions given explicitly. ... You have to be careful when you use pointers. ... REAL, TARGET :: MATRIX(100,100) REAL, POINTER :: WINDOW(:,:) INTEGER :: N1, N2, M1, M2 WINDOW => MATRIX(N1:M1, N2:M2) If you later wish to change a dimension of the partial matrix WINDOW you only need to make a new pointer association. ...

Еще в разделе: (Показать все результаты (>4168) - crydee.sai.msu.ru/ )

• SunSoft
• Dynamic HTML in Communicator
• User interface