The HyperNews Linux KHG Discussion Pages . Forum: The Linux Kernel Hackers' Guide . Keywords: Makefile, configuration . Date: Sun, 14 Sep 1997 03:41:59 GMT . ... I'm aware of the make config/menuconfig/xconfig etc., but a program I am writing for Uni will require that I am able to directly configure the Makefile(s).. Can anyone give me a general overview of where all the CONFIG_blah_blah_blahs go? ... I'd appreciate it if someone could tell me the general rule. ...

Еще в разделе: (Показать все результаты (>4937) - www.arcetri.astro.it/ )

• Kernel Configuration and Makefile Structure

. Next: static.c Up: Modular Example Previous: header.h . # # Makefile # SOURCES.c= main.c WriteMyString.c INCLUDES= CFLAGS= SLIBS= PROGRAM= main OBJECTS= $(SOURCES.c:.c=.o) .KEEP_STATE: debug := CFLAGS= -g all debug: $(PROGRAM) $(PROGRAM): $(INCLUDES) $(OBJECTS) $(LINK.c) -o $@ $(OBJECTS) $(SLIBS) clean: rm -f $(PROGRAM) $(OBJECTS) . Dave.Marshall@cm.cf.ac.uk . Wed Sep 14 10:06:31 BST 1994

Еще в разделе: (Показать все результаты (>60) - jet.sao.ru/ )

• Running Make

... Compilation always includes the procedure code which is then saved in oyster/oyster.cpr . This does not apply to GDL installations, where code is compiled on the fly. Makefiles exists in the main directory which simplify the installation. Use make -f Makefile.idl to compile the IDL installation, and make -f Makefile.gdl to prepare the GDL installation. ... Make sure your OS is either Linux or Darwin, checking with the uname UNIX command. ...

Еще в разделе: (Показать все результаты (>23) - www.eso.org/ )

• C libraries
• DFS Department development environments
• Home page of Christian A. Hummel

include ../src/ Makefile .defs # Jeff Mock # 2030 Gough St. # San Francisco, CA 94109 # jeff@mock.com # # Copyright 2005,2006 # # $URL: https://www.mock.com/svn/pdev/trunk/gx/sp/sim/ Makefile $ # $Id: Makefile 920 2007-02-25 20:17:33Z jeff $ # DEBUG = 1 # Test signal parameters # PER = 10.1 PHASE = 0 # SWEEP = 0.0005 SWEEP = 0.0002 AMP ...

Еще в разделе: (Показать все результаты (>120) - www.naic.edu/ )

• http://www.naic.edu/~phil/hardware/pdev/fpga/gx/sp/build/Makefile
• pdev_birdies_25jun07

... NCSA HTTPD 1.1 Makefile . ... The aim was to have a replacement for the Netscape commerce server that with the simple addition of a key would be able to server Netscape clients. ... Command line option addition -z ssl -z ssl -z debug -z verify=INT -z cert=filename -z key=filename -z standalone # run standalone for a single request # which is very useful for debugging . ... Also the macro FPRINTF for the SSL version of fprintf was added to make "porting" easier. ... Catch heaps of fprintf's  . ...

Еще в разделе: (Показать все результаты (>8) - comet.sai.msu.ru/ )

• http://comet.sai.msu.ru/docs/ssl/mosaic.html
• Examples of creating an archive file
• Checking directory contents

... Log: Makefile,v $ # Revision 1.26 2009/08/31 04:14:25 phi196 # make warning cleanup # # Revision 1.25 2009/08/25 23:16:29 phi196 # Remove vsib.ko from defaults # # Revision 1.24 2008/11/25 13:34:37 phi196 # Get module from subdir # # Revision 1.23 2008/09/10 10:43:15 phi196 # Added init.vsib # # Revision 1.22 2008/09/10 10:37:45 phi196 # Changed init.d startup option # # Revision 1.21 2008/03/25 00:36:09 ...

Еще в разделе: (Показать все результаты (>61) - www.atnf.csiro.au/ )

• Downloading Duchamp
• Tempo 11 Installation

... Bojan Nikolic web pages (r. 329) . ... Building CASA . ... QT4INCD = /usr/include /usr/include/QtCore /usr/include/QtDBus /usr/include/QtGui /usr/include/QtXml /usr/include/qwt QT4INCD = $(QT4ROOT)/include $(QT4ROOT)/include/QtCore $(QT4ROOT)/include/QtGui $(QT4ROOT)/include/QtXml $(QT4ROOT)/include/qwt . ... Notes on the classic CASA build . ... Makedef notes . A prototype build system for CASA using SCons . ... Copyright 2005 -- 2016, Bojan Nikolic feedback welcome ...

Еще в разделе: (Показать все результаты (>18) - www.mrao.cam.ac.uk/ )

• Building CCMTools as required by CASA Bojan Nikolic web pages (r. 329)
• OptInt PmWiki : MROIDelayLine / Prototype Software To Do List
• Index of /~jsy1001/resources/exchange

OS/2 REXX */ /* make a Makefile from an Imakefile from inside or outside the sources * * $XFree86: xc/config/util/xmkmf.cmd,v 3.0 1996/01/24 21:56:19 dawes Exp ... later scripts rely on their existance */ libpath = getenv('LIBRARY_PATH') incpath = getenv('C_INCLUDE_PATH') /* get args */ PARSE ARG arg0 arg1 arg2 arg3 /* from here almost everything is the same as in the xmkmf sh script */ topdir = '' curdir = '.' do_all = 0 IF ... EXIT END RETURN x ...

Еще в разделе: (Показать все результаты (>42) - crydee.sai.msu.ru/ )

• http://crydee.sai.msu.ru/ftproot/pub/comp/os/os2/hobbes/incoming/automake-1.14.1.txt
• http://crydee.sai.msu.ru/ftproot/pub/comp/os/os2/hobbes/incoming/automake-1.13.1.txt
• http://crydee.sai.msu.ru/ftproot/pub/comp/os/os2/hobbes/incoming/gputils-1.2.0.txt

Use xmkmf if it works on your system to create Makefile. If it fails, a command line that builds xmccd without using the Makefile is one such as gcc -o xmccd -O2 -fno-strength-reduce -L./sbig -L/usr/X11R6/lib xmccd.o -lXm -lXt -lSM -lICE -lXext -lX11 -lsbigudrv4.0 -lm You may need to change the library path (-L flag) for the installation on your system. This one works for Slackware 9.1 .

Еще в разделе: (Показать все результаты (>98) - www.astro.louisville.edu/ )

• http://www.astro.louisville.edu/software/sbig/archive/xmccd-1.2/HOWTOMAKE
• Index of /software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio-3...
• Index of /software/sbig/archive/xmccd-4.1/xmccd-4.1e/libcfitsio/libcfitsio

No configuration file for you! 0) Install R and cfitsio, determine locations of fitsio.h, R.h, Rinternals.h libcfitsio.so, libR.so (Note: you may have to edit the Makefile for cfitsio to force it to make a shared library.) 1) Edit Makefile 2) "make shared" 3) Move librfits.so to desired library location 4) Edit first lines of rfits.r to point to libcfitsio.so and librfits.so 5) See rfits.API for list of RFITS functions and their arguments

Еще в разделе: (Показать все результаты (>15) - hea-www.harvard.edu/ )

• http://hea-www.harvard.edu/~fine/Tech/cs1.2/Readme1.2
• Index of /~fine/Tech/cs1.2
• Index of /~fine/Tech/cs1.1

... Obtaining the software . ... a. Decide on the root directory where your software is going to go.... /home/friday , for example. b. In your .cshrc file, define . ... home/friday/]lib . ... after make ) an object code library ../pack/qub/libqub.a . ... Then a common section of code, found in ../pack/make_library supplies all the necessary targets: . ... remove The conservative way to build this library is to cd /home/friday/pack/qub; make; make install; make clean . ... cd /home/friday/pack; make . ...

Еще в разделе: (Показать все результаты (>15) - star.arm.ac.uk/ )

• Simon's Software - howto 1-3
• Index of /f77to90/code
• Software Store - Installing SPECTRUM

XEphem Forum Message . Forums: . ... God and Science · SETI · Software · UFO · XEphem . ... Discussion Forums | ... Post . ... Re: RPM Package Available For XEphem 3.4? Forum List | ... Post Message | ... Posted by Forum Master on December 11, 2000 12:51:53 UTC . ... www.astronomy.net . About Astronomy Net | Advertise on Astronomy Net | ... Forum posts are Copyright their authors as specified in the heading above the post. "dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET" . ...

Еще в разделе: (Показать все результаты (>4) - www.astronomy.net/ )

... A Java application designed to display spectra from Hubble Space Telescope's STIS instrument relies on a Java-IRAF interface to access the data in a efficient way. ... A simple spectrum visualization tool is being developed by the Science Software Group at the Space Telescope Science Institute (STScI), basically to evaluate the capabilities (and weaknesses) of Java as a possible environment for development of data visualization and analysis tools tailored to Hubble Space Telescope (HST) data. ...

Еще в разделе: (Показать все результаты (>18) - www.adass.org/ )

• ADASS 2002 Conference Proceedings

As of 1.3, the Apache source directories have been re-organised. This re-organisation is designed to simplify the directory structure, make it easier to add additional modules, and to give module authors a way of specifying compile time options or distribute binary modules. ... The non-module source files have moved from src into src/main . ... Configure . ... For example, say it is called mod_demo.c. The archive for this module should consist of two files, in a suitable directory name. ...

Еще в разделе: (Показать все результаты (>9) - neptun.sai.msu.ru/ )

• Compiling Apache for Microsoft Windows
• Using Apache with Novell NetWare
• Manual Page: apxs - Apache HTTP Server

... Set this to where you want bp installed. Choices include: # 1) your standard perl library path, usually /usr/lib/perl. # 2) your site-specific perl library path, often /usr/lib/perl/site_perl # 3) a completely new place, such as /usr/local/lib/bp # 4) leave them here in the source directory # options 3 and 4 will require that the environment variable BPHOME be set # to run any bp programs, but I prefer them. ... BINDEST = /usr/local/bin # This is the prefix that will be used for the perl scripts. ...

Еще в разделе: (Показать все результаты (>3) - hea.iki.rssi.ru/ )

• http://hea.iki.rssi.ru/conf/hea2007/tmp/Mail-Bulkmail-3.12/Makefile

... Метки: Twitter . ... 101) Байки из Фидо (7) Литература (16) Листая страницы прошлого Выберите месяц Апрель 2016 (2) Март 2016 (4) Февраль 2016 (4) Январь 2016 (5) Декабрь 2015 (4) Ноябрь 2015 (3) Октябрь 2015 (5) Сентябрь 2015 (5) Август 2015 (5) Июль 2015 (5) Июнь 2015 (4) Май 2015 (8) Апрель 2015 (5) Март 2015 (4) Февраль 2015 (4) Январь 2015 (7) Декабрь 2014 (7) Ноябрь 2014 (4) Октябрь 2014 (5) Сентябрь 2014 (8) Август 2014 (8) Июль 2014 (6) Июнь 2014 (7) Май 2014 (11) Апрель 2014 ...

Еще в разделе: (Показать все результаты (>7) - astro.uni-altai.ru/ )

... Астрофотография (Модераторы: Павел Бахтинов , Ivan Mhitarov ) ? Альтернативный метод обработки . ... Сообщений: 1 135 . Рейтинг: +9/-0 . ... Записан . Сообщений: 9 667 . Рейтинг: +368/-1 . ... Ответ #1 : 07.03.2008 [19:24:33] ? ... Сообщений: 3 221 . Рейтинг: +162/-4 . ... Последнее редактирование: 08.03.2008 [00:00:02] от 1212Lupus ? ... Последнее редактирование: 08.03.2008 [00:17:52] от Bronislav ? ... Сообщений: 936 . ... Сообщений: 5 414 . Рейтинг: +102/-11 . ...

Еще в разделе: (Показать все результаты (>6) - www.astronomy.ru/ )

• xephem - стр. 1 - Астрономия и компьютеры
• Софт для Linux - Астрономия и компьютеры

... Configuration The dictionary accepts one obligatory parameter - RULES, which has to be set to the file describing parsing rules and output recipes. ... Each non-empty line is either a comment (when started with '#' symbol), or a conversion rule, and in the latter case has to contain whitespace-separated pattern and output recipe. Currently, pattern has to match the _integer_ (one, two or more) number of input tokens; they will be replaced with a single one. ...

19. VaST homepage

---

Астронет | Научная сеть | ГАИШ МГУ | Поиск по МГУ | О проекте | Авторам

Комментарии, вопросы? Пишите: info@astronet.ru или сюда