... The function gtk_drag_source_set() specifies a set of target types for a drag operation on a widget. void gtk_drag_source_set( GtkWidget *widget, GdkModifierType start_button_mask, const GtkTargetEntry *targets, gint n_targets, GdkDragAction actions ); . ... void (*drag_begin)(GtkWidget *widget, GdkDragContext *dc, gpointer data) . ... void (*drag_data_received)(GtkWidget *widget, GdkDragContext *dc, gint x, gint y, GtkSelectionData *selection_data, guint info, guint t, gpointer data) . ...

Next: Sending Signals - kill() Up: Process Control and Management Previous: pipe() - Low level Piping . ... When a process terminates abnormally it usually tries to send a signal indicating what went wrong. ... The process uses signals which can be numbered 0 to 31. Macros are defined in signal.h header file for common signals. ... Sending Signals - kill() . Receiving signals - signal() . ... Wed Sep 14 10:06:31 BST 1994 ...

About us . ... Telescopes . ... Apart from the 6-meter telescope BTA two small telescopes are operative at SAO: the 1-m and 0.6-m telescopes, both manufactured by Carl Zeiss, Jena, are located near the BTA. ... These telescopes are used for adjusting the equipment and techniques of observations used at the BTA. ... The observational time allocation and also a brief description of the equipment of the 1-m telescope, which is used either permanently or mainly on this telescope, are presented below. ...

... Corresponding gates in each row are connected in parallel at both edges of the array. ... Other gates. ... otherwise indicated, 45 kpixels/sec and standard voltages using a dual slope CDS circuit (8 µs integration time) Minimum Format Pixel Size Imaging Area Dark current (MPP), 20° C equivalent Readout noise Front Back Full Well signal Output gain CTE per pixel Typical 512 x 512 pixels 24 µm x 24 µm 12.3 mm x 12.3 mm 50 pa/cm2 5 electrons 7 electrons 350,000 electrons 1.5 µV/ electron 0 ...