... A full description of the echelle commands is given in the Appendix . ... The echelle package is hierarchically organised from low--level commands (level 0) to high--level commands (level 3). ... Level 0. ... Level 1 commands perform the individual steps of the reduction. Parameters may be provided on the command line (thus updating the echelle keywords) or will be read from the echelle keywords (set by command SET/ECHELLE ). ... Table: Echelle Level--3 Commands . ...

Еще в разделе: (Показать все результаты (>3480) - www.sao.ru/ )

• Parameters
• Echelle Spectra
• Session Parameters

ESO Phase 3 Data Release Description Please start from this template when preparing the documentation for your ESO Phase 3 data release. ... Finally, the release description will be published as submitted - without further editing by ESO - to support the user community in utilizing the data. ... Please indicate if this is a catalogue data release. ... Data Reduction and Calibration Please address the following questions for scientific catalogue data, particularly in case of source catalogues: . ...

Еще в разделе: (Показать все результаты (>19579) - www.eso.org/ )

... If the user types "!" at the first ">" prompt, the existing parameter file is used if one exists. ... The following commands are available (for a description see the VAX/VMS Hermes User's manual): keyword=values (only one keyword per line) /ABO /ERRLEV n /GO /MESLEV n /OFF dev /ON dev /MODE n /STAT n When the program calls one of the routines of the Userinp family, the user is prompted in the usual way (depending on the default level). ... At the first occasion the ">" prompt will then appear. ...

Еще в разделе: (Показать все результаты (>27795) - www.atnf.csiro.au/ )

• Reducing WSRT Data with AIPS
• User Parameters - Data Location & Beam Selection CentralProcessor 0.11
• The Schedule File

Table 4.1: Solar System Standard Targets . Table 4.2: Target Description Keywords . Table 4.3: Positional Parameters for TYPE = COMET . ... Observers for solar system Targets of Opportunity (e.g. a "new" comet or asteroid, a solar-wind disturbance reaching the Jovian magnetosphere, etc.), should complete the Generic Target List ( See 3.12 Generic Targets List [Generic_Targets] ) and the Visit and Exposure Specifications (to the extent possible) in time for the Phase II deadline. ...

Еще в разделе: (Показать все результаты (>23482) - www.stsci.edu/ )

• Introduction to the FGS
• HDF-S Flanking Fields Data Reduction / Technical Issues
• Solar System Targets

... The XMM calibration database is comprised of calibration datasets (the current calibration file, or CCF [ 1 ]), and a number of calibration algorithms and access functions (the calibration access layer, or cal ). ... To achieve this, and at the same time not require updating whenever a new calibration function is added to the cal , calview interacts with the cal through the interfaces provided by the calibration state server, and the calibration view server. ... Figure 1: The calview user interface....

Еще в разделе: (Показать все результаты (>20362) - xmm.vilspa.esa.es/ )

• Detailed Description

... Apache HTTP Server Version 2.4 . ... Session encryption support . ... session_crypto_module . ... The session will be encrypted with the given key. Different servers can be configured to share sessions by ensuring the same encryption key is used on each server. ... The SessionCryptoPassphrase directive specifies the keys to be used to enable symmetrical encryption on the contents of the session before writing the session, or decrypting the contents of the session after reading the session. ...

Еще в разделе: (Показать все результаты (>11296) - www.arcetri.astro.it/ )

• mod_macro - Apache HTTP Server
• Program parameters
• Objects, Methods, and Properties

. The command man gives you access to an on-line manual containing a complete description of every command available on this system. man can also provide you with one line descriptions of commands specified by name; or for all commands whose description contains any of a set of keywords. Understanding the organisation of the manual . Searching by keyword . Checking the description of a command . Viewing manual pages . Printing manual pages .

Еще в разделе: (Показать все результаты (>762) - comet.sai.msu.ru/ )

• Features provided by the shell
• Special shell variables
• Character Entity Set(s)

... The technology needed to implement a Distributed Astronomical Data Archive (DADA) is available today (e.g., Fullton 1993). Query interface standards are needed, however, before the DADA information will be discoverable. ... These parameters would be used to index each dataset in each catalog. ... The technology is available today to perform cross-catalog queries, to fetch the data at the click of a mouse, quickly to add new observation catalogs, and to distribute the load across multiple machines. ...

Еще в разделе: (Показать все результаты (>1898) - www.adass.org/ )

• The SRON-HeaD Data Analysis System
• Footnotes
• The SuperCOSMOS Sky Surveys

gmtset - To change individual GMT default parameters gmtset PARAMETER1 value1 PARAMETER2 value2 PARAMETER3 value3 ... gmtset will adjust individual GMT defaults settings in the current directory's .gmtdefaults file. If no such file exists one will be created. ... To change the dpi to 600, set anotation font to Helvetica, and select grid-crosses of size 0.1 inch, try gmtset DOTS_PR_INCH 600 ANOT_FONT Helvetica GRID_CROSS_SIZE 0.1i gmt , gmtdefaults . ...

Еще в разделе: (Показать все результаты (>688) - xray.sai.msu.ru/ )

• Page contents
• Parameters of binary compact star evolution

TOOLS OF TEST GENERATION FOR SATELLITES CONTROL PROGRAMS Andrey Tyugashev, Ekaterina Myasnikova, Elena Sopchenko S.P. Korolyov Samara State Aerospace University (National Reseach University) The paper presents a research in the field of test automation for testing spacecraft control programs. ... Programmers or designers of spacecraft systems write tests manually. ... Tests are carried out by issuing the control actions on the spacecraft and condition monitoring systems parameters of the spacecraft. ...

Еще в разделе: (Показать все результаты (>487) - www.ssau.ru/ )

Welcome to the 10C Survey website! ... The first 10C Survey results from an area of 27 sq. degrees complete to 1 mJy and 12 sq. degrees complete to 0.5 mJy have now been released. ... The first results from the survey, which is the deepest extragalactic radio source survey of any significant extent (> 0.2 sq. degrees) above 1.4 GHz, including the deep 15.7-GHz source count are contained in AMI Consortium: Davies et al. ... For each field, deep and shallow areas have been defined. ...

Еще в разделе: (Показать все результаты (>2039) - www.mrao.cam.ac.uk/ )

• Simple logging of scripts and their parameters Bojan Nikolic web pages (r. 329)
• Astrophysics Group VLSS
• Astrophysics Group NVSS

The following are useful tcsh completions I use, which should mostly be fairly standard for any unix platform, so you can just drop them into place. # directories complete cd 'C/*/d/' complete rmdir 'C/*/d/' complete lsd 'C/*/d/' # signal names # also note that the initial - can be created with the first completion # but without appending a space (note the extra slash with no # append character specified) ...

Еще в разделе: (Показать все результаты (>3345) - hea-www.harvard.edu/ )

• Fixing and Freeing Region Markers
• Model Spectra for Spectral-Fitting Program
• Topics in AstroStatistics

SAI VO . ... Web Services . Catalog Access Services . ... SAI Web Services . ... This service aims to automatically match stars in FITS image provided with catalogue and add the correct WCS keywords to its FITS header. ... Service Web Interface . ... The service is available here To use it, you has to provide the image as a Base64-encoded string, along with the rough information on image field of view size and center (the latter may be deduced from FITS header keywords like 'RA' and 'DEC'). ...

Еще в разделе: (Показать все результаты (>756) - vo.astronet.ru/ )

• SAI Virtual Observatory Project

... SFIT is a general-purpose code designed to optimize theoretical stellar spectra to an observed spectrum. ... While the programme expects input from "stdio", it is more natural to save commands in a file (eg "sfit_input") and run the code simply by . ... If the spectra to be fitted have a filename "star_spectrum", then the best fit spectrum will be written out, together with the renormalized input spectrum, to a file called "star_spectrum.fit". ... sets up model spectrum grid (and for 2nd star) . ...

Еще в разделе: (Показать все результаты (>3483) - star.arm.ac.uk/ )

• lte-codes: sterne model atmospheres
• Atomic data for Stellar Atmospheres: lte_lines
• Stellar Atmospheres Software

Databases (NSDC) of the Natural Planetary Satellites. ... NSDC: Database of astrometric observations of Natural Planetary Satellites . ... They are thoroughly looking for observations in different sources, creating their owndatabases which are then mostly inaccessible to other researchers. ... In the file "content" with explications, the reference is given to the data source as well as the bibliographic reference. ... Data sources. ... Why a specific bibliographic database for Natural satellites? ...

Еще в разделе: (Показать все результаты (>460) - lnfm1.sai.msu.ru/ )

• Data bases of Natural Satellites. Documentation. Sources
• Data bases of Natural Satellites. Documentation. Manual
• Natural Satellites Service. Special Ephemerides

... Document Title | Document Number | ... The code uses fields: category, system, subsystem, EMA, vendor, and a sequential number. ... Previous Document Number This is a TEXT field and represents the document number that preceeds the found document in the set of original documents supplied by the engineer/vendor. ... Next Document Number This is a TEXT field and represents the document number that follows the found document in the set of original documents supplied by the engineer/vendor. ...

Еще в разделе: (Показать все результаты (>1102) - www.apo.nmsu.edu/ )

• APO Housing Form
• MILT Description
• Mirror Controller Actor

... Audible Indication of Any Network Condition. ... Label Configurations Standard Bindings NFPA110 GenSet Alarm and Status Annunciator The · · · · · · (A) The · · · · · · (A) The · · · (A) The · · · (A) following conditions are provided as High Battery Voltage (A) · Low Battery Voltage (A) · Generator Running (G) · Genset Supplying Load (G) · Pre- Low Oil Pressure (A) · Low Oil Pressure (R) · = Amber; (R) = Red; (G) = Green following conditions are provided as Check ...

Еще в разделе: (Показать все результаты (>5626) - www.naic.edu/ )

• Arecibo Observatory L-Wide Band Receiver
• Smart Basketweaving
• AGES Database Search

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

Еще в разделе: (Показать все результаты (>713) - www.iki.rssi.ru/ )

• INTERBALL-TAIL KP
• Lunar Orbiter 1
• Geomagnetic Indices Kp, ap, Ap, Cp and C9

DEVCON for LAN Systems!! ... PSP LAN Systems develops products that provide network operating system services (such as file, print, transaction, security and directory) for multiple operating systems (OS/2, DOS, Windows and AIX). ... PSP LAN Systems has identified an API (or development tools) strategy that provides an application development environment with industry standard APIs for application portability and object frameworks to assist developers with code reuse. ...

Еще в разделе: (Показать все результаты (>5721) - crydee.sai.msu.ru/ )

• Keyword arguments and default arguments
• Fortran 95
• Bugs found so far in XFree86/OS2 3.3.1

The NTP Version 3 daemon currently supports several different radio, satellite and modem reference clocks plus a special pseudo-clock used for backup or when no other clock source is available. Detailed descriptions of individual device drivers and options can be found in the Reference Clock Drivers page. Additional information can be found in the pages referenced there, including the Debugging Hints for Reference Clock Drivers and How To Write a Reference Clock Driver pages. ...

Еще в разделе: (Показать все результаты (>2710) - www.sai.msu.su/ )

• xntpd - Network Time Protocol (NTP) daemon
• NIST Modem Time Service
• Generic Reference Driver