... Up: Data Analysis Applications . ... The ISOPHOT Interactive Analysis system, a calibration and scientific analysis tool for the ISOPHOT instrument on board ESA's Infrared Space Observatory (ISO), has been further developed while ISO is in operation. ... The ISOPHOT Interactive Analysis (PIA) is an IDL based software tool developed for calibration and scientific analysis of data from ISOPHOT (Lemke et al. 1996), one of the instruments on board ISO (Kessler et al. 1996). ...

XMM-Newton Science Analysis System Page: 1 orbit June 28, 2006 Abstract Create a FITS timeseries \HK-like" le from the ODF Spacecraft Reconstructed Orbit File. ... Both sets of values will be written into a standard OGIP-compliant FITS binary extension table with a TIME column value, derived from a start, stop and sampling interval time, each speci ed by the user. ... StartANDEndNotInODFRange (error) Start AND End times selected not congruent with input ODF obs times. ... SAS ODF must be properly set. ...

The activities of the group started at the end of 70's with the building of FIRT: the photometer of the National Infrared Telescope ( TIRGO ). The group has also developed a large amount of software and procedures in order to define all the relevant parameters of the systems. ... See also the local Labir4Giano pages. ... In addition to the development of the above instruments, we also carried some observations in collaboration with the science groups of Arcetry Observatory. ... Giano Local Page . ...

Next: Dynamic Scheduling Up: Scan Times Previous: Dealing with Formatter Reconfigurations Contents . The nominal scan start time, if set using DWELL , is the time good data is expected to be available. ... The more modern systems, especially the Mark5C recorders and the software correlators, approach this ideal and the recordings are started at the time specified in the VEX file for the start of good data. ... A recording scan is the time between stops of the recording media. ...

In this chapter we will consider an example of visual expert system written on the Actor Prolog language. ... There are a lot of methods of oil field bed stimulation that increase output of the oil production: thermal, physical-chemical, gas, microbiological, and others. ... Fig. ... The Top-Most diagram consists of three blocks: the "Describe parameters of hydrocarbon field" block, the "Check adaptability of existed methods of oil production" block, and the "Display solution" block. ... Gas methods. ...

Next: The Optopus session Up: Using the Optopus Previous: Using the Optopus . The commands in the Optopus package have to initialised by setting the Optopus context with the MIDAS command SET/CONTEXT OPTOPUS . ... Since almost all commands in the package work, both in input and in output, on MIDAS tables, another important task of the user at the start of an Optopus session will be to create a MIDAS table from the ASCII file where the data about the objects to be observed are being kept. ...

... TO DISPLAY #------------------------------------------------------------------------------------------------------------------- Parameter Name : OBS.PROG.ID Header1 : PROG_ID Type : string Value Format : %-13s Start : 1 End : 13 Parameter Name : OBS.ID Header1 : OBS_ID Type : integer Value Format : %-10i Start : 1 End : 10 Parameter Name : OBS.TARG. NAME Header2: TYPE Type: string Value Format: %-17s Parameter Name: DPR.TECH Header1: . ...

... The INTEGRAL Science Data Centre Roland Walter, Alain Aubord, Paul Bartholdi, Jurek Borkowski, Pierre Bratschi, Tomaso Contessi, Thierry Courvoisier, Davide Cremonesi, Pierre Dubath, Donnald Jennings, Peter Kretschmar, Tim Lock, St’ephane Paltani, Reiner Rohlfs and Julian Sternberg 1 INTEGRAL Science Data Centre, Chemin d' ’ Ecogia 16, CH--1290 Versoix, Switzerland Abstract. INTEGRAL is a gamma­ray observatory mission of the Eu­ ropean Space Agency to be launched in 2001. ...

... ID: STEP 1) DOWNLOAD THE SOFTWARE PROGRAM FROM HERE For full-frames: wfc3uv_ctereverse.F For subarrays: wfc3uv_ctereverse_wSUB.F Parallel processing version: wfc3uv_ctereverse_parallel.F STEP 2) COMPILE THE PROGRAM IN SOME DIRECTORY (NOT NECESSARILY THE EXECUTION DIRECTORY) For full-frames: g77 wfc3uv_ctereverse.F -o wfc3uv_ctereverse.e or For subarrays: g77 wfc3uv_ctereverse_wSUB.F -o wfc3uv_ctereverse_wSUB.e . ... This particular routine insists that all the exposures be in the same directory. ...

Some Documentation for the IDL ICRED . ... This is the system which recieves all command inputs. it decodes inputs and selects tasks, parses parameter inputs and also runs the 'go', 'list' and 'help' commands. It does no error checking, for example to see if the parameter inputs are sensible (e.g. it does not check if an x-range has been entered as 'chicken', rather than a more understandable range of say 10,20). 2) the task decoders: icred_<taskname>.pro . ... Other tasks or important commands: . ...

The Agile window provides complete control over the Agile high-speed photometer. ... All other parameters are specified as part of the command that starts an exposure sequence. ... To connect the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile connDev fw . ... To home the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile fwhome (there must be a filter wheel mounted in Agile for homing to succeed). ...

Sherpa Aneta Siemiginowska 1 SHERPA CIAO's Modeling and Fitting Application Aneta Siemiginowska CXC Astrostatistics Workshop, HEAD meeting , New Orleans, Septemter 2004 Sherpa Aneta Siemiginowska 2 Modeling and Fitting Software XSPEC - analysis of 1D X-ray data (imaging + grating) ISIS and Pint of Ale- primarily for analysis of highresolution (ie grating) X-ray data ... Jointmode data: spatialspectral, spatialtiming Use scripts based on Sherpa only commands. ...

SAI 175 anniversary . ... Moscow University . Search for in SAI Moscow University Search for in Russian astronomical resources . ... SAI Astronomical Databases . ... Browse SAI Software archive(ftp.sai.msu.su) . ASTRONET.RU - Russian Astronomical Network (available in translit also) . ... SAI Supernovae Research Group . ... Department of the Galaxy and Variable Stars (in Russian) . Sternberg Astronomical Institute Seminars . ... All-Russian Astronomical Olympiad (in Russian) . ...

Stellarium 0.12.3 . ... StelCircleArcRenderer Class Reference . Provides functions to draw circle arcs using StelRenderer . ... drawGreatCircleArc (const Vec3d &start, const Vec3d &stop, const SphericalCap *clippingCap=NULL, void(*viewportEdgeIntersectCallback)(const Vec3d &screenPos, const Vec3d &direction, void *userData)=NULL, void *userData=NULL) . ... Create a circle arc renderer to draw multiple circle arcs . ... void(*)(const Vec3d &screenPos, const Vec3d &direction, void *userData)љ . ...

... OOF . ... OOF Index . ... OOF software . ... Fits up to fifth order . ... These are experimental data currently being analysed, not final documentation of research. ... Only fitting for Zernike orders up to and including 3rd to concentrate on finding possible off-axis aberrations. ... The results below show that when fitting for all Zernikes up to and including fifth order, the output maps vary greatly between pixels. As above, but fitting up to fifth order Zernike polynomial. ...

Next: Star Formation Rate and Up: No Title Previous: Calculation of Evolutionary Tracks . To start calculations, we choose the distributions of the initial binary parameters: the mass of the primary ZAMS component, , binary mass ratio, , orbital separation a . ... whereas the mass ratio distribution is not. ... The zero assumption often made is that the mass ratio distribution has a flat shape, that is binaries with a high mass ratio occur as frequently as those with equal masses. ...

... Meade Instruments Corporation . ... Meade Pictor XT-Series CCD Autoguider/Imagers . ... Section 1: Getting Started . ... To Take an Image . ... Section 3: File Menu . Section 4: Edit Menu . Section 5: View Menu . Section 6: Image Menu . ... Merge Images . ... Meade Software License Agreement . ... Manufacturer is Meade Instruments Corporation, 6001 Oak Canyon, Irvine, California 92620. ... Index of Instruction Manuals . ... Copyright 2006 Meade Instruments Corporation, All Rights Reserved. ...

... Resolution - 1.5-2.0 km . Swath - 450 km . ... Swath - 550 km . ... Resolution - 370 km . ... Spectral bands - 0.6-0.7 um; 0.8-1.1 um . ... Kondor - system for collection and transmission of data from sea and ice stations . ... Downlinking to ground stations (main centers) . ... Satellite's information system operates in both direct transmission mode and recording to on-board recorder mode with later downlink to ground station. ... For more information send a mail to: info@sputnik.infospace.ru . ...

... Created: 23 February 2001 . ... SOFTWARE MAINTENANCE MANUAL . ... 9 January 2001 . ... Note: in the final document, the table of contents will be to third level] . The Software Maintenance Manual describes the procedures for installation and maintenance of the software for the Gemini Near-infrared Integral Field Spectrograph (NIFS). ... Section 19.4.3 of the document “Programmatic Requirements for Gemini Instrumentation Development” states the requirements for the Software Maintenance Manual . ...

... Prev . Next . comedi_command -- start streaming input/output . ... int comedi_command (comedi_t * device, comedi_cmd * command); . The function comedi_command() starts streaming input or output. The command structure pointed to by the parameter command specifies the acquisition. For input subdevices, sample values are read using the function read(). For output subdevices, sample vlaues are written using the function write(). ... comedi_command_test ...