WFC3 Instrument Handbook for Cycle 24 . ... Wide Field Camera 3 Instrument Handbook for Cycle 24 > Chapter 6: UVIS Imaging with WFC3 > 6.2 Specifying a UVIS Observation . ... Specifying a UVIS Observation . ... Configuration : always WFC3/UVIS . ... Aperture: must be specified; see Section 6.4.4 and Section 6.4.5 for the dimensions, location, and reference point (target placement) of the full array and subarray apertures. ... Spectral Element: must be specified for each exposure; see Section 6.5 . ...

Еще в разделе: (Показать все результаты (>20436) - www.stsci.edu/ )

• Chapter 5: Visits, Exposures and Exposure Groups
• Mode = POSConfig = FGS
• Mode = ACCUMConfig = NIC1 or NIC2 or NIC3

... Meta Index / Home Page This section documents the parameters recognized by this task (if any). ... string . ... yes|no . Yes' forces overwrite of colimchain output. astest . ... Yes' invokes asmooth to smooth the input images before they are supplied to colimplot . ... The maximum allowed value of the width of the smoothing gaussian is specified via this parameter. desiredsnr . ... The maximum desired signal-to-noise ratio of the output image can be specified via this parameter. nconvolvers . ...

Еще в разделе: (Показать все результаты (>23235) - xmm.vilspa.esa.es/ )

• Description

... This section gives a brief description of each of the parameters available to SCHED that are specifically for VLA observations or are especially useful for VLA observations. ... Should be provided for non-VLBI observations. ... This used to be required in order to obtain calibration data for the VLBI observations. ... FREQ: and DOPPLER Warning -- these parameters cannot be used for non-VLBI observations at the VLA since they are only used to adjust the baseband converter frequencies. ...

Еще в разделе: (Показать все результаты (>17442) - www.atnf.csiro.au/ )

• The Schedule File
• Pulsar Group PmWiki/Available Actions
• Tasks

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Еще в разделе: (Показать все результаты (>66859) - www.eso.org/ )

• VLTI Calibrator Selection Help Page
• VIRCAM Exposure Time Calculator
• Data Flow System overview

... For reducing data from ESO instrumentation it is assumed that the FITS headers conform the standards set by the document ``ESO Archive, Data Interface Requirements''. ... As an example, in the ESO case the exposure type is stored in the ESO hierarchical FITS keyword `HIERARCH ESO GEN EXPO TYPE'. ... To fill the CCD keywords with the telescope and instrument setup parameters, like name of the telescope, CCD used, read-out noise, frame size, etc. the command LOAD/CCD can be used. ...

Еще в разделе: (Показать все результаты (>2805) - www.sao.ru/ )

• Outline of the Available Methods
• Session Parameters
• Extinction and transformation models

... This section will deal with obtaining photons within specified regions of an image. Available regions are: Annulus Box Circle Ellipse Field -- entire field Irregular region based on intensity of map... i.e. region defined by contour levels. ... The imcnts task in the xray-spatial package sums the source and background counts in specified regions, and subtracts one from the other properly normalized. ... imcnts* - Find counts in an extended region, after removing an embedded point source . ...

Еще в разделе: (Показать все результаты (>3042) - hea-www.harvard.edu/ )

• Editing Files and Parameters
• Possible Pitfalls
• Fixing and Freeing Region Markers

... Apache HTTP Server Version 2.4 . ... Session encryption support . ... session_crypto_module . ... The session will be encrypted with the given key. Different servers can be configured to share sessions by ensuring the same encryption key is used on each server. ... The SessionCryptoPassphrase directive specifies the keys to be used to enable symmetrical encryption on the contents of the session before writing the session, or decrypting the contents of the session after reading the session. ...

Еще в разделе: (Показать все результаты (>9606) - www.arcetri.astro.it/ )

• Program parameters
• mod_macro - Apache HTTP Server
• Observing capabilities

... Second, the observatory can control the configuration, test data analysis procedures, and provide calibration solutions with the help of instrument models. This paper presents the VLT object-oriented framework for the development of ETCs (Exposure Time Calculators) and data simulators. ... Instrument simulations are being developed for the purpose of predictive calibration, instrument configuration control, and evaluation of data analysis procedures. ...

Еще в разделе: (Показать все результаты (>1886) - www.adass.org/ )

• Indexing and Searching Distributed Astronomical Data Archives
• A Spectroscopy Exposure Time Calculator for IRAF
• VLT Data Quality Control

OptInt PmWiki . Pm Wiki / . Edit Page | ... Available Actions . ... Cookbook actions . Page actions are applied to wiki pages, as a query string appended to the URL . ... edit the specified page, see basic editing PmWiki's basic edit syntax . ... action= dc . ... To see more than what ?action=ruleset gives you, apply the Cookbook:MarkupRulesetDebugging recipe: it can also show the pattern and the replacement strings. doesn't make use of PmWiki's authorization mechanisms. ?action= phpinfo . ...

Еще в разделе: (Показать все результаты (>4654) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / Available Actions
• OptInt PmWiki : Include Other Pages
• OptInt PmWiki : PmWiki / Include Other Pages

Plans are under way to create a new way of performing non-interactive observations which will be called auto-observing . ... Non-interactive observing with CIMA has for a long time been available with the use of CIMA command files. Contrary to normal command file observing which requires a command file with a set of commands to be executed sequentially, auto-observing will use a list of sources and a list of instructions on how to observe each of the sources. ...

Еще в разделе: (Показать все результаты (>5620) - www.naic.edu/ )

• The Mock Spectrometer
• CIMA Data Taking Modes
• INTRODUCTION to Spectral Line Observing at AO

The Agile window provides complete control over the Agile high-speed photometer. ... All other parameters are specified as part of the command that starts an exposure sequence. ... To connect the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile connDev fw . ... To home the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile fwhome (there must be a filter wheel mounted in Agile for homing to succeed). ...

Еще в разделе: (Показать все результаты (>913) - www.apo.nmsu.edu/ )

• TUI:Scripts:Built In Scripts:(Inst):Focus
• Astrophysical Research Consortium - Apache Point Observatory
• sgs summary

AUTOMATIC STATION OF ECOLOGICAL CONTROL . ... STATE OF ASEC DEVELOPMENT . ... ASEC . ... Warranted life-time of balloons and calibration mixed gases, months . ... Telemetry system supplying information from each station to ecological center on technical state of gas analyzing equipment and instruments, emergency situations and unauthorized opening of the station. available . ... Calibration mixed gasses are stored inside the balloons as part of ASEC. ... Official WEB-site of S.P.Korolev RSC Energia . ...

Еще в разделе: (Показать все результаты (>915) - www.energia.ru/ )

... Exposure Time Calculator (ETC) . ... ESO - Public Surveys . ... the recommended values to use for DIT, . ... Detector on-chip integration (DIT): seconds. to your chosen value - a separate page gives recommended values to use for DIT - for modes 1 and 2 below you may wish to start with the maximum recommended values as these will minimize the effect of read noise (a total object exposure of Y secs with DIT=X secs will produce Y/X lots of read noise) and give you a lower limit on the time needed. ...

Еще в разделе: (Показать все результаты (>28) - www.vista.ac.uk/ )

• VISTA - Visible and Infrared Survey Telescope for Astronomy

Pulkovo NEO Page . ... EPOS Software Package . ... EPOS ( E phemeris P rogram for O bjects of the S olar system) is the Windows PC application for study and ephemeris support of observations of the Solar system objects. ... It controls the part of common data and transfers the control to one of the programs that solve the restricted set of tasks. ... So with the EPOS software package one can calculate the accurate ephemerides for many objects and get the quick illustration of their motion as well. ...

Еще в разделе: (Показать все результаты (>315) - www.gao.spb.ru/ )

The problem of solar wind data correlation for the observations onboard several spacecraft is very important for three points of view: . ... This problem is studied now in detail by systematic determination of ion flux and ion velocity data correlations by INTERBALL-1 (IKI group), WIND and IMP 8 (both - MIT group). ... Solar wind plasma correlation lengths from IMP 8, WIND and INTERBALL-1. ... Correlation of solar wind observations onboard several spacecraft: INTERBALL-1, IMP 8 and WIND data. ...

Еще в разделе: (Показать все результаты (>1177) - www.cosmos.ru/ )

• Radiometric Complex Traverse
• OFO IKI / Universal Navigation Instrument
• OFO IKI / BOKZ

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

Еще в разделе: (Показать все результаты (>2478) - crydee.sai.msu.ru/ )

• Specifications
• Tutorial on Fortran 90, Digital UNIX
• Conformance: requirements and recommendations

Static Fourier spectrometers are often used for spectral measurements of the ionosphere emissions. There are two main advantages of Fourier spectrometers (FS) - large geometric factor and high spectral resolution; these parameters are two orders better than for grating spectral instruments. ... In scanning Fourier spectrometer optical and electric modulation of signal is used to avoid this problem, for static Fourier spectrometer there are no such ways. ...

Еще в разделе: (Показать все результаты (>121) - space.univ.kiev.ua/ )

• A computer controlled low light photometer for nightglow observations
• MISSION WARNING

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

Еще в разделе: (Показать все результаты (>723) - www.iki.rssi.ru/ )

• INTERBALL-TAIL KP changes
• AZ Key parameters, 1998
• AZ Key parameters, 1997

... SphereParams Struct Reference . ... SphereParams (const float radius) . ... Definition at line 50 of file StelGeometryBuilder.hpp . ... Definition at line 103 of file StelGeometryBuilder.hpp . ... Definition at line 120 of file StelGeometryBuilder.hpp . ... Definition at line 112 of file StelGeometryBuilder.hpp . ... Definition at line 118 of file StelGeometryBuilder.hpp . ... Definition at line 110 of file StelGeometryBuilder.hpp . ... Definition at line 114 of file StelGeometryBuilder.hpp . ...

Еще в разделе: (Показать все результаты (>848) - astro.uni-altai.ru/ )

• Stellarium: TextParams Struct Reference
• Stellarium: SphericalRegion::DrawParams Struct Reference
• Stellarium: RingParams Struct Reference

To construct frequency distribution (histogram) of minor planets according to value of some element/ parameter/ function user should first select Elements item in menu bar and then Histogram in drop-down menu. ... User has possibility to save histogram or to print it using standard means. To save the file select File item in menu bar and then Save As... in drop-down menu. ... To print histogram select File item in menu bar and then take advantage of options Print Preview , Print Setup , Print . ...

Еще в разделе: (Показать все результаты (>632) - www.ipa.nw.ru/ )

• Keywords_54