... Instruments . ... Exposure_Number: 1 Target_Name: HD12345 Config: HRS Opmode: ACQ Aperture: 2.0 Sp_Element: MIRROR-N1 Wavelength: Optional_Parameters: BRIGHT=RETURN, ! ... Number_of_Iterations: 1 Time_Per_Exposure: 13.5S Special_Requirements: ONBOARD ACQ FOR 2 Comments: STEP-TIME = 1.5 sec Exposure_Number: 2 Target_Name: HD12345 Config: HRS Opmode: ACQ/PEAKUP Aperture: 0.25 Sp_Element: MIRROR-N1 Wavelength: Optional_Parameters: SEARCH-SIZE=5 ! ...

... Parameter . ... yes . typelist of files . A list of spectrum files from a set of observations, referring to one RGS instrument and one spectral order. These spectra files must be produced using the attstyle=user and associated parameters from a call to rgsproc . ... list of files . ... If this parameter is set to yes, the spectra files of the input lists will be combined to produced a combined spectrum file each for both spectra and background spectra files. filermf . ... file . ...

... Several of the tasks in the spectral package share a common set of parameters. ... Each task in the spectral package has a hidden parameter which points to the pkgpars parameter file. The parameters stored here include the observed data sets and the model descriptor, and instrument-specific parameters. ... The observed counts and error data set contained in the table file ( *_obs.tab ) produced by qpspec will be the input data for subsequent spectral tasks. ...

Next: The Reduction Session Up: Echelle Reduction Previous: Standard orientation . ... The command SHOW/ECHELLE displays only those parameters which must be set according to the options and methods chosen for the reduction. ... Current parameters are saved with the command SAVE/ECHELLE name , where name is the session name. ... Current parameter values are set to the default value with the command INIT/ECHELLE , or set to the values of a previously saved session with INIT/ECHELLE name . ...

Static Fourier spectrometers are often used for spectral measurements of the ionosphere emissions. There are two main advantages of Fourier spectrometers (FS) - large geometric factor and high spectral resolution; these parameters are two orders better than for grating spectral instruments. ... In scanning Fourier spectrometer optical and electric modulation of signal is used to avoid this problem, for static Fourier spectrometer there are no such ways. ...

The Agile window provides complete control over the Agile high-speed photometer. ... All other parameters are specified as part of the command that starts an exposure sequence. ... To connect the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile connDev fw . ... To home the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile fwhome (there must be a filter wheel mounted in Agile for homing to succeed). ...

The problem of solar wind data correlation for the observations onboard several spacecraft is very important for three points of view: . ... This problem is studied now in detail by systematic determination of ion flux and ion velocity data correlations by INTERBALL-1 (IKI group), WIND and IMP 8 (both - MIT group). ... Solar wind plasma correlation lengths from IMP 8, WIND and INTERBALL-1. ... Correlation of solar wind observations onboard several spacecraft: INTERBALL-1, IMP 8 and WIND data. ...

... Main page . ... Parameters . ... Modes: . ... Long-slit . ... Back to SAO web page . ... This page is designed by A.V. Moiseev . ... The SCORPIO-2 project: . Spectral Camera with Optical Reducer for Photometric and Interferometric Observations - 2 . The SCORPIO-2 main parameters . ... Spectral range . ... Spectral resolution . R=500-4000 in long-slit mode . R=4000-15000 in scanning FPI mode . The CCD detector . ... The quantum efficiency measurements for CCD detector ...

... The project assumes creation of an international space observatory - the interferometer "Earth - Space - Space" in order to perform of astronomical investigations in millimeter, submillimeter and infrared regions with extremely high sensitivity (to a few nanoJanskies units of flux density in continuum spectrum) and extremely high angular resolution (to a parts of microsecond of arc or, possibly, nanosecond). ... radio-interferometric channels of the system "Space - Space", region 0.2 - 3 mm; . ...

... Second, the observatory can control the configuration, test data analysis procedures, and provide calibration solutions with the help of instrument models. This paper presents the VLT object-oriented framework for the development of ETCs (Exposure Time Calculators) and data simulators. ... Instrument simulations are being developed for the purpose of predictive calibration, instrument configuration control, and evaluation of data analysis procedures. ...

... QC1 database . ... The quality information is derived in form of QC1 parameters. ... The Health Check monitor collects QC1 parameters and their scores. ... The results are presented in two views: the graphical HEALTH CHECK monitor with the full trending reports, and the QUICK-LOOK monitor with scores. ... The Health Check Monitor is a joint effort of the Quality Control Group in Garching and of Paranal Science Operations. ... You can download the QC1 parameters, and also connect to the QC1 database....

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

. The ALFA instrument monitor window is a big window showing all ALFA engineering parameters (with the exception of the ALFA motor). The 'Open motor control window' button opens the ALFA motor control window . You can return to the main CIMA page by clicking here .

... Figure: Massive binary evolutionary track. ... A short glance to this track is sufficient to understand that there are a lot of evolutionary scenario parameters, which affect different stages of the binary evolution. Fortunately, a very limited number of parameters has effect on the compact binary merging rate. ... The most important (and practically unique) parameter changing the galactic binary NS merging rate is the distribution of an additional (kick) velocity imparted to NS at birth. ...

... Thus all regions of the 0.94-2.50 micron wavelength range accessible from Mauna Kea can be recorded using five fixed angle gratings. ... Grating Angle . ... Efficiencies for the NIFS gratings are shown above. The NIFS spectrograph uses a Bouwers collimator and a refractive camera. ... With these assumptions, the NIFS system efficiency including the Gemini telescope optics but excluding the transmission of the adaptive optics system is about 0.17 e - /photon at J , and 0.22 e - /photon at H and K . ...

... spectrum . ... sfit . ... define >macro_name< : define a macro . ... meth_range <w1> <w2>: Set wavelength range for fit . data_spectrum <name> : data in "spectrum" format . ... data_sigma <sigma> : define mean standard error in data . ... data_line_set | ... NB: synth uses multiple calls to spectrum , so various Spectrum commands may also be required. synth : find optimum fit by adjusting abundances, v turb , v sin i , and v rad . ... save <fit> : Save the spectrum and best fit from synth . ...

main parameters . ... Small Detector   (SD) with thin polyethylene moderator and cadmium shield ; . Medium Detector (MD) with medium polyethylene moderator and cadmium shield ;   . Large Detector (LD) with thick polyethylene moderator and cadmium shield ; . ... Duty regime ; . ... Duty” frame with keeping data (92 bytes) in Duty r egime . Standard” frame with 6 spectra (212 bytes) in Mapping r egime . Profile” frame with 6 spectra and 2 profiles (512 bytes) in Burst r egime ...

hstpolsim -- Produce simulated polarization input data frames for HST instruments . ... inint = "" [name] . ... Name of the HST instrument for which simulated polarization images are to be produced. ... Name of the instrument specific polarizing filter for simulated images (ignored for SPECIAL instrument). filtname = "" [name] . Name of the instrument specific colour filter for simulated images. ... The header parameter FILTER provides the filter name and POLANG the polarizer angle. ...