... Default . ... The descriptions below focus on the meaning of each filename parameter, leaving the exact details of the inferred default value to be explained in the algorithm section. evlist . ... file . The response matrix file (OGIP-compliant format). ... If a spectrum file is not provided ( withspectrum =no) this parameter specifies the INDEX number of a source in the source description list (parameter srclist ), and thereby the incidence angle and selection regions for the response matrix. ...

... The models provided are: . abs - absorption of x-rays by neutral gas with solar abundances. parameter 1 = . ... parameter 2 = . ... normalization - logarithmic value of the flux density at 1 keV in units of keV cm -2 s -1 keV -1 . ... normalization - logarithmic value of the normalization of the gaussian in units of keV cm -2 s -1 . ... absorption ( params )* model ( params ) . ... A single value for the normalization (i.e., fixed normalization) will force the program to use that value. ...

... CentralProcessor 0.11 documentation . Calibration and Imaging Documentation . The cmodel pipeline task is responsible for extracting a local sky model (LSM) from the global sky model (GSM) and building an image from the components and/or images resulting from the request. ... MPI wrapper> cmodel -c config.in . ... None . ... If Cmodel.gsm.database is set to asciitable then a row/column (space separated) file is used as the global sky model source. ... cmodel (Model Image Generator) . ...

... The analysis of NICMOS polarization images is aimed at determining the Stokes' Parameters, and from those the polarization angle and degree for each pixel. NICMOS Camera 1 and Camera 2 each contain three polarizers, whose principal axes of transmission are separated by 120 degrees. ... The images in the three filters need to be compared, in order to produce the Stokes' parameters. ... The Stokes parameters can then be combined to yield the polarized intensity, I p: . ...

... All the parameters provided in this database have been obtained using the the MIRIAD ( Sault et al. 1995 ) task MBSPECT . MBSPECT makes a spectrum of the velocity (or frequency) axis of a cube. The spectrum is beam-weighted, over the width specified, for the other image axes. ... Robust parameters are calculated by using an algorithm which minimises the mean absolute deviation of the flux-weighted velocities. mask= This specifies the x-axis ranges to be excluded from any continuum fit. ...

... JavaScript version 1.3 provides the following new features and enhancements: . ... See the Client-Side JavaScript Guide for details. ... Changes to the Array object. ... The push method returns the new length of the array rather than the last element added to the array. ... Changes to the Date object. ... Added a day parameter to the setMonth method. ... Added the apply method, which allows you to apply a method of another object in the context of a different object (the calling object). ...

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Next: Star Formation Rate and Up: No Title Previous: Calculation of Evolutionary Tracks . To start calculations, we choose the distributions of the initial binary parameters: the mass of the primary ZAMS component, , binary mass ratio, , orbital separation a . ... whereas the mass ratio distribution is not. ... The zero assumption often made is that the mass ratio distribution has a flat shape, that is binaries with a high mass ratio occur as frequently as those with equal masses. ...

... The technology needed to implement a Distributed Astronomical Data Archive (DADA) is available today (e.g., Fullton 1993). Query interface standards are needed, however, before the DADA information will be discoverable. ... These parameters would be used to index each dataset in each catalog. ... The technology is available today to perform cross-catalog queries, to fetch the data at the click of a mouse, quickly to add new observation catalogs, and to distribute the load across multiple machines. ...

Symbolic circuit-matrix processor and evaluator . ... This software is reliable over the range of benchmark circuit complexity (both *.CIR and *.MAT file). ... SYMBOL is a symbolic-algebra package which in contrast to REDUCE, MACSYMA, MAPLE, MATHEMATICA, MathLAB, MathCAD and other known multi-purpose systems is especially intended for analysis of any lumped, linear, time-invariant circuit. ... pure ASCII text . ... CIRSYM - SYMbolic CIRcuit processor used to format ASCII text file *.out for CALCSYM. ...

The Network Time Protocol (NTP) is used to synchronize the time of a computer client or server to another server or reference time source, such as a radio or satellite receiver or modem. ... Information on the NTP architecture, protocol and algorithms can be found in the following articles and reports, which are available online . Mills, D.L. Internet time synchronization: the Network Time Protocol. ... Mills, D.L. Network Time Protocol (Version 3) specification, implementation and analysis. ...

Next: SettingSaving, and Up: CCD Reductions Previous: Nature of CCD . The CCDRED package provides a set of basic commands that perform the various calibration steps. ... Other keywords contain general information, e.g. about the telescope/instrument being used. ... The MIDAS CCD package works in combination with the MIDAS Data Organizer which generates, using a set of selection rules, a MIDAS table containing the science frames and their associated calibration frames. ...

... This API (Application Programming Interface) document has pages corresponding to the items in the navigation bar, described as follows. The Overview page is the front page of this API document and provides a list of all packages with a summary for each. ... Each package has a page that contains a list of its classes and interfaces, with a summary for each. ... Each of these pages has three sections consisting of a class/interface description, summary tables, and detailed member descriptions: . ...

Please enter the lightcurve file name and period search parameters: . Lightcurve file: . ... Apply the Heliocentric correction and convert all dates to Terrestrial Time (TT)? ... Also, the Heliocentric correction cannot be applied to such lightcurves. ... This period search service is also available at the mirror sites: Mirror 1 , Mirror 2 , Mirror 3 , Mirror 4 . You may download the latest source code distribution and install the period search service at your own web server. ...

... THANK YOU NASA. ... I decided to return to a full-time job (after a 15-year hiatus raising my children). I took a civil service exam, was called the next day and assigned as a GS-5 to the Flight Operations Division, NASA Space Task Group, to Chris [Christopher C.] Kraft and Charles [W.] Mathews (Chief) located in separate buildings, on the West Side of Langley Air Force Base. ... Chris Kraft was also the Mission Flight Director for the Mercury Astronauts. ... Return to JSC Oral History Website . ...

This module provides for user authentication using DBM files. ... Source File: mod_auth_dbm.c . ... This module provides for HTTP Basic Authentication, where the usernames and passwords are stored in DBM type database files. ... AuthDBMGroupFile . ... Module: mod_auth_dbm . ... The AuthDBMUserFile directive sets the name of a DBM file containing the list of users and passwords for user authentication. ... This program can be used to create and update DBM format password files for use with this module. ...

Anchors, embedded images, and all other elements which contain URIs as parameters may cause the URI to be dereferenced. In this case, the security considerations of the URI specification apply. ... The MD attribute is useful when authors are concerned that a linked object may be subsequently changed to something other than intended. This attribute is used to specify a cryptographic checksum for the linked object to provide a check on its integrity. ...

... Wind Baffle Parameters . ... As part of this analysis, the volume, mass, center of gravity and mass moment of inertia of the telescope and optics support structure (OSS) were computed. ... The total moment of inertia of the circular floor panel, wind baffle and telescope in azimuth should be correct to 30% but is dependent on estimates of the mass of equipment supported below and above the circular floor panel. ... Table 8 : Masses and mass moments of inertia of the wind baffle components. ...

Stellarium 0.12.3 . ... FileљStructure . ... SphericalRegion . DrawParams . ... SphericalRegion::DrawParams Struct Reference . Parameters specifying how to draw a SphericalRegion . More... #include < StelSphereGeometry.hpp > . DrawParams (class StelProjector *projector) . Construct DrawParams with default parameters and specified projector. ... Do not subdivide the region to follow projection distortions. ... class StelProjector * SphericalRegion::DrawParams::projector_ . ...

Databases (NSDC) of the Natural Planetary Satellites. ... NSDC: Database of astrometric observations of Natural Planetary Satellites . ... They are thoroughly looking for observations in different sources, creating their owndatabases which are then mostly inaccessible to other researchers. ... In the file "content" with explications, the reference is given to the data source as well as the bibliographic reference. ... Data sources. ... Why a specific bibliographic database for Natural satellites? ...