... Parameter . ... Type . ... data set . ... The name of the observation-wide attitude time series data set created by atthkgen . ... name of existing D -type column in attset . The name of the column in the attitude data set containing the time tags - passed to tabgtigen in parameter timecolumn . ... A selection switch which determines the type of selection expression that the attitude time series is filtered with. cone and pyramid select the fixed cone- and pyramid filters (see above) respectively. ...

... HST . How precise are the parameters of my double star as measured in Transfer Mode? ... Data . ... HST Peer Review Process . ... HST Overview . Overview . ... Retrieving HST Data . ... Data Analysis . ... HST Science Year in Review . ... FGS Data Handbook . ... A: Analysis of calibration and other data has shown that the separations obtained in the analysis the Transfer Functions of double stars have a precision of around 1 milli arc-second. ...

... For reducing data from ESO instrumentation it is assumed that the FITS headers conforms the standards set by the document ``ESO Archive, Data Interface Requirements''. ... As an example, in the ESO case the exposure type is stored in the ESO hierarchical FITS keyword `HIERARCH ESO GEN EXPO TYPE'. ... To fill the CCD keywords with the telescope and instrument setup parameters, like name of the telescope, CCD used, read-out noise, frame size, etc. the command LOAD/CCD can be used. ...

... As modern observatories evolve to production units delivering data products and calibrated scientific data to the end users, new challenges arise in assessing the quality of data products. ... Taking the analogy of speed control on a motorway we can describe the system as a device (radar) collecting measurements of the system performance (passing cars). ... One of the direct applications of quality control is the verification of instrument performance based on the analysis of calibration exposures. ...

... The instrument modes and arms should be indicated and described, and the keywords that distinguish between different modes should be indicated (usually INS.MODE is used if it is a mode and OCS keys are used in case it is related to an arm). ... Raw frames The format of the raw frames for each mode and arm should be described. ... The design should be checked on pre-processing or processing, which involves products only (no trigger via raw frames). ... QC parameters. ...

The Agile window provides complete control over the Agile high-speed photometer. ... All other parameters are specified as part of the command that starts an exposure sequence. ... To connect the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile connDev fw . ... To home the filter wheel controller, issue this command in the command bar at the bottom of the Log window: agile fwhome (there must be a filter wheel mounted in Agile for homing to succeed). ...

. Documents latest versions (PS and Latex)

OptInt PmWiki . ... MROI Delay Line Design Contract . ... Systems Engineering Docs . ... MROI FTT Contract Private Material . ... Doc Man . ... 1100 FTT/NAS . ... 1120 Camera . ... 1170 Test Equipment . ... MRO-TRE-CAM-0000-0102 FTT/NAS Conceptual Design Report . ... MRO-ICD-CAM-1000-0109 "FTT/NAS,FLC-UTE" FTT/NAS & FLC to Enclosure ICD . MRO-ICD-CAM-1000-0110 "FTT/NAS,FLC-NOT" FTT/NAS & FLC to optical table ICD . MRO-ICD-CAM-1000-0111 "FTT/NAS,FLC-UT" FTT/NAS & FLC to UT optical ICD . ...

... Created: 23 February 2001 . ... SOFTWARE MAINTENANCE MANUAL . ... 9 January 2001 . ... Note: in the final document, the table of contents will be to third level] . The Software Maintenance Manual describes the procedures for installation and maintenance of the software for the Gemini Near-infrared Integral Field Spectrograph (NIFS). ... Section 19.4.3 of the document “Programmatic Requirements for Gemini Instrumentation Development” states the requirements for the Software Maintenance Manual . ...

... Source File: mod_negotiation.c . Module Identifier: negotiation_module Content negotiation, or more accurately content selection, is the selection of the document that best matches the clients capabilities, from one of several available documents. ... A type map (a file with the handler type-map ) which explicitly lists the files containing the variants. ... Apache only recognizes encodings that are defined by an AddEncoding directive. ... Content-Language: . ... Module: mod_negotiation . ...

... As the 430 MHz line-feed radar beam is approximately 300 m in diameter in the meteor zone, the sodium lidar beam will need to be expanded to approximately that diameter and the receive telescope suitably aligned and field-of-view adjusted. The lidar would be operated synchronously with the radar at the same IPP and raw data from each pulse would be retained for post-processing. ... The lidar IPP must be synchronized with the 1 msec radar IPP with data readout every IPP over the meteor zone. ...

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

... hstpolima: Reduce linear polarization data for HST instruments (currently FOC, NICMOS and WFPC2 are supported). ... Images for the three Stokes parameters (I,Q and U), the linear polarization and position angle and their error images are output. hstpolpoints: Reduce linear polarization data for HST instruments for a set of circular apertures. ... There is a web page http://www.stecf.org/software/impol/ briefly describing the package and giving example polarization maps for HST and model data. ...

... Most HTML elements are identified in a document as a start tag, which gives the element name and attributes, followed by the content, followed by the end tag. ... To identify the document as being HTML 3.0, it is recommended that documents start with the prologue: <!doctype HTML public "-//W3O//DTD W3 HTML 3.0//EN"> . ... HTML 3.0 documents formally have the following structure: <HTML> <HEAD> head elements .. ... HTML> . ... The permitted syntax of HTML 3.0 compliant documents is specified by the...

Static Fourier spectrometers are often used for spectral measurements of the ionosphere emissions. There are two main advantages of Fourier spectrometers (FS) - large geometric factor and high spectral resolution; these parameters are two orders better than for grating spectral instruments. ... In scanning Fourier spectrometer optical and electric modulation of signal is used to avoid this problem, for static Fourier spectrometer there are no such ways. ...

The problem of solar wind data correlation for the observations onboard several spacecraft is very important for three points of view: . ... This problem is studied now in detail by systematic determination of ion flux and ion velocity data correlations by INTERBALL-1 (IKI group), WIND and IMP 8 (both - MIT group). ... Solar wind plasma correlation lengths from IMP 8, WIND and INTERBALL-1. ... Correlation of solar wind observations onboard several spacecraft: INTERBALL-1, IMP 8 and WIND data. ...

... SGML . The text/html content type . In this section, we begin the specification of HTML 4.0, starting with the contract between authors, documents, users, and user agents. ... These recommendations are not normative and conformance with this specification does not depend on their realization. ... An HTML document is an SGML document that meets the constraints of this specification. ... A user is a person who interacts with a user agent to view, hear, or otherwise use a rendered HTML document. ...

... VLBA+Italy survey (to contact the schedulers) (closed) E.Fomalont and J.Romney: To provide some review of problems happened with fringe search in VSOP project. (closed) M.Popov : To compose a tentative time -table of possible observations , and inform the observatories on the specific time slots that might be requested for fringe search program in October-November. (continued) C. Gwinn: to try to compile FAKERAT software on modern platforms. (closed) GBT and ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... Публикации и издания Публикации профессорско-преподавательского состава СГАУ Издания проф. Сосниной Т.Н. Biosphere: Analysis of Value Parameters . ... Besides, the ways of saving the use value and value properties of biosphere are analyzed. The expediency of transformation of two-criterion theory of value into the three- criterion theory of the balance of value, where the ecologic component performs the function of the key criterion has been founded. ... BIOSPHERE USE VALUE OF THE PRODUCT: MAIN . ...