... In order to perform accurate tracking throughout an exposure, software onboard the Optical Monitor(OM) selects n (up to 10) guide stars visible within the FOV and monitors their position and counts during the exposure. This information is logged in the ODF OM tracking history data auxiliary file. This task produces a PPS Product OM OSW FITS tracking star timeseries file containing rates for all guide stars, one column per star, providing serendipitous information on guide star variability. ...

... Launch Date: 1966-08-10 . ... The Lunar Orbiter 1 spacecraft was designed primarily to photograph smooth areas of the lunar surface for selection and verification of safe landing sites for the Surveyor and Apollo missions. ... The spacecraft was placed in a cislunar trajectory and injected into an elliptical lunar orbit for data acquisition. ... An 80-millimeter lens system was used to obtain Medium-Resolution (MR) photos, and a 610-millimeter lens system was used for High-Resolution (HR) photos. ...

Lunar Orbiter 1 . ... The Lunar Orbiter 1 spacecraft was designed primarily to photograph smooth areas of the lunar surface for selection and verification of safe landing sites for the Surveyor and Apollo missions. ... The spacecraft was placed in a cislunar trajectory and injected into an elliptical lunar orbit for data acquisition. ... An 80-millimeter lens system was used to obtain Medium-Resolution (MR) photos, and a 610-millimeter lens system was used for High-Resolution (HR) photos. ...

This diagram illustrates the effects of absolutely positioning a box with respect to the initial containing block. ... Most of the "inner" box contents are therefore rendered outside the document window. ... The text that is to the left of the line numbers lies outside the initial containing block. The lines, as they appear in the image, contain approximately: 1 Beginning of body contents. Start 2 of outer contents. End of outer 3 contents. End of body contents. ...

Ground Support of RadioAstron . Control and Tracking Stations . RadioAstron satellite control (command transmission, telemetry, orbit measurements) will be conducted from Evpatoria and Bear Lake control stations. ... Coarse orbit measurements will be carried out from control stations. Each measurement takes ten minutes. ... Orbit measurements at tracking stations give only radial component of spacecraft velocity but the measurements are going continuously during observing sessions. ...

Please enter the lightcurve file name and period search parameters: . Lightcurve file: . ... Apply the Heliocentric correction and convert all dates to Terrestrial Time (TT)? ... Also, the Heliocentric correction cannot be applied to such lightcurves. ... This period search service is also available at the mirror sites: Mirror 1 , Mirror 2 , Mirror 3 , Mirror 4 . You may download the latest source code distribution and install the period search service at your own web server. ...

Table 4.1: Solar System Standard Targets . Table 4.2: Target Description Keywords . Table 4.3: Positional Parameters for TYPE = COMET . ... Observers for solar system Targets of Opportunity (e.g. a "new" comet or asteroid, a solar-wind disturbance reaching the Jovian magnetosphere, etc.), should complete the Generic Target List ( See 3.12 Generic Targets List [Generic_Targets] ) and the Visit and Exposure Specifications (to the extent possible) in time for the Phase II deadline. ...

... We present a proposed standard for data dictionaries associated with catalogs being accessed through the Astrophysics Data System (ADS) Mosaic Catalog Service. Each catalog made available for searching must have a data dictionary, which consists of a set of specified keywords describing format, content and location of data. ... There are two keywords in the Table Data Dictionary which indicate to the server software that the corresponding column contains special attributes. ...

... casa::RegexBase . ... find (const Char *s, String::size_type len, Int &matchlen, String::size_type pos=0) const =0 . ... match (const Char *s, String::size_type len, String::size_type pos=0) const . ... rfind (const Char *s, String::size_type len, Int &matchlen, String::size_type pos= String::npos ) const . ... search (const Char *s, String::size_type len, Int &matchlen, Int pos=0) const . ... String::size_type find(const Char *s, String::size_type len, Int &matchlen, String::size_type pos=0) const;...

... Astrophysics Group . ... VLSS . ... To facilitate access for UK and European users, MRAO is providing a UK Mirror of the VLA Low-frequency Sky Survey (VLSS), which is being produced in the US jointly by NRAO and the Naval Research Laboratory (NRL). ... A catalog of discrete sources on these images created by fitting a elliptical Guassians to all sources detected at the 5 sigma level or higher. ... This survey contains publicly available images and catalog information on over 1.8 million radio...

I/146 Positions and Proper Motions (Roeser+ 1988) ================================================================================ Catalogue of Positions and Proper Motions Roeser S., Bastian U. =1988A .. ... 449R ================================================================================ ADC_Keywords: Positional data; Proper motions Description: PPM North gives J2000 positions and proper motions of 181,731 stars north of -2.5 degrees declination. ... The mean epoch is near 1931. ...

Semiconductor Home > Products > Mixed Signal and Analog > CCD IMAGERS Family > . TC213, 1024- X 512-PIXEL CCD IMAGE SENSOR . ... The TC213 is a frame-transfer charge-coupled device (CCD) image sensor that provides very high-resolution image acquisition for image-processing applications such as robotic vision, medical X-ray analysis, and metrology. The image format measures 12.00 mm horizontally by 6.12 mm vertically; the image-area diagonal is 13.5 mm. ... 13.5-mm Image-Area Diagonal . ...

PowerCommand Software For Windows (PCW 2.5) Description PowerCommand Software for Windows v2.5 provides advanced monitoring and control for Cummins Power Generation and other customer equipment via the PowerCommand Network. ... Features · Scalable software interface to Cummins Power Generation Products to allow a wide range of capabilities, ranging from simple direct-connected data gathering to total system monitoring. ... Tabular view of data for Cummins network components. ...

... Co-ordinate systems description . Directories structure . The file names' construction . The file set description . ... The orbital information for each month is presented in the separate directory. The INTERBALL orbital data are located on the STDA server, for each month in the separate subdirectory, which name consists from the year (YYYY) and month (MM) numbers. The Parent Directory of the Tail Probe orbital data is http://www.iki.rssi.ru/da/interball/tail/orbit/ . ...

... Driver ID: IRIG-AUDIO . ... This driver supports the Inter-Range Instrumentation Group standard time-distribution signal IRIG-B using the audio codec native to the Sun SPARCstation. ... The driver gadget uses a modified BSD audio driver for the Sun SPARCstation which provides a timestamp, raw binary timecode, status byte and decoded ASCII timecode. ... The 100 elements of the IRIG-B timecode are numbered from 0 through 99. ... This driver presently does not use the CF elements. ...

... This page collects information about the php scripts which are used on the web pages for the closed QC loop (calChecker, HC monitor, score report). databases . ... dfos tools . ... The web server running www.eso.org has a php server installation. T he calChecker and HC monitor web sites both use php-based web interfaces for accepting analysis results and comments. ... It is created on the fly, and uploaded to the php URL, each time calChecker executes. ... HC monitor php: the comment interface . ...

Next: Photometry Up: Regions and Source Parameters Previous: *imcnts* - Find counts . This task (developed for use with optical images, but also useful with x-ray data) will quickly compute location, size, ellipticity, and position angle of sources. ... User can generate contour plots of any portion of the image and count rates in slices through the image. The program is advertised as ``quick [optical] photometry''. input file: rp110590_im1.imh . output file: logfile . ... Photometry . ...

... FTP access the basic models is here . ... Below, we put short descriptions of the used SED models for the photometric redshifts providing by the current server . ... The uniqueness of this model consists in expanding to the near IR (NIR) of Rocca-Volmerange and Guiderdoni's (1988) atlas of synthetic spectra with a revised stellar library, which includes parameters of cool stars. ... Homepage of the GISSEL model). ... Another model used earlier is the model of synthetic spectra of Poggianti (1997). ...

... This API (Application Programming Interface) document has pages corresponding to the items in the navigation bar, described as follows. The Overview page is the front page of this API document and provides a list of all packages with a summary for each. ... Each package has a page that contains a list of its classes and interfaces, with a summary for each. ... Each of these pages has three sections consisting of a class/interface description, summary tables, and detailed member descriptions: . ...

... Packet Format . ... The TCC broadcasts UDP packets containing position information. ... Packet Header . ... int4 . ... double . ... pos, vel double . ... pos, vel, time double . ... See the TCC Message Keywords Dictionary for full definitions of most items in the "data" section of the packet. pos, vel double is a structure containing two doubles: "pos" and "vel"; it contains the same information as the TCC's "coordinates" (p,v,t triplets), but with time given by the "TAIDate" entry in the packet. ...