... rgssources (rgssources-5.28) [xmmsas_20041122_1834-6.1.0] . Meta Index / Home Page / Examples. ... setenv SAS_CCF <the .cif file> setenv SAS_ODF <the ODF directory> rgssources srclist=PooooooooooiiteeeSRCLI_0000.FIT or setenv SAS_CCF <the .cif file> setenv SAS_ODF <the ODF directory> rgssources srclist=rrrrooooooooooiiteee00_sources.ds or setenv SAS_CCF <the .cif file> setenv SAS_ODF <the ODF directory> rgssources srclist=<non-standard name> instrument=<rgs1 or rgs2> exposure=<exp num> . ...

Еще в разделе: (Показать все результаты (>34165) - xmm.vilspa.esa.es/ )

• Examples

... HST . ... HST Overview . ... Other important information on coronagraphy can be found in Chapter 5 of the NICMOS Data Handbook, section 5.1 of the NICMOS Instrument Handbook as well as in the following performance summaries: Performance of the Coronagraph in Cycle 7 , and Motion of the Coronagraphic Hole OverTime . ... NICMOS ISR 2005-001: NICMOS Two Gyro Mode Coronagraphic Performance . ... 2004 AAS Poster--HST/NICMOS Coronography: Prospects for Cycle 13 and Beyond-A Choice of Coronagraphic Imagers...

Еще в разделе: (Показать все результаты (>21348) - www.stsci.edu/ )

• NICMOS Phase I
• NICMOS Phase II
• Phase II Example: NICMOS Parallel Observations

Next: *timsort* Up: Timing Analysis Previous: Summary of tasks in . ... Events will be time ordered in the output file. xt> timsort xdata$snr psr ``c 503 513 24'' none A light curve is then generated and plotted so we can inspect the gross properties of the sample (the sequence of good-data intervals and gaps) and any source variability. xt> ltcurv psr none psr 500 xt> ltcplot psr_ltc Finding this sample satisfactory, we search for periodicity with a fast Fourier transform. ...

Еще в разделе: (Показать все результаты (>2765) - hea-www.harvard.edu/ )

• A Few Words About ROSAT Directories at SAO

... The STECF IRAF layered package impol provides five tasks specifically aimed at reduction of HST imaging polarimetry data for ACS, FOC, NICMOS and WFPC2. ... Reduction of HST polarimetry data and simulation of raw polarimetry images, together with polarization vector plotting, are covered. ... hstpolsim -- Produce simulated polarization input data frames for HST instruments from images of the total signal, the linear polarization and the position angle of the polarization vectors. ...

Еще в разделе: (Показать все результаты (>66866) - www.eso.org/ )

• DFOS: directory structure
• Data Quality Control and Instrument Modeling
• ESO - Directory of Astronomy Librarians and Libraries

To compare two directories in the current directory: diff usability Usability Only in Usability: schedule diff usability/email Usability/email 2a3,4 > Jean JRS@pollux.ucs.co > Jim jim@frolix8 . diff reports that the file (or directory) schedule is unique to the directory Usability . diff then reports that there are differences between the file email in the directory usability and the file of the same name in the directory Usability . ...

Еще в разделе: (Показать все результаты (>641) - comet.sai.msu.ru/ )

• Example of location of a home directory
• Examples of copying directories with the cp command
• Examples of removing directories

... Apache HTTP Server Version 2.2 . ... On systems with multiple users, each user can be permitted to have a web site in their home directory using the UserDir directive. Visitors to a URL http://example.com/~username/ will get content out of the home directory of the user " username ", out of the subdirectory specified by the UserDir directive. ... Per-user web directories . ... the URL http://example.com/~rbowen/file.html will be translated to the file path /home/rbowen/public_html/file.html . ...

Еще в разделе: (Показать все результаты (>8572) - www.arcetri.astro.it/ )

• mod_example - Apache HTTP Server
• mod_dir - Apache HTTP Server
• mod_vhost_alias - Apache HTTP Server

... Several HST instruments both current and decommisioned have provided imaging linear polarimetry capabilities. ... The STECF IRAF layered package impol provides five tasks specifically aimed at reduction of HST imaging polarimetry data. ... Reduction of HST polarimetry data and simulation of raw polarimetry images, together with polarization vector plotting, are covered. ... For reduction of data from imaging linear polarization instruments other than from HST, the instrument name is `SPECIAL'. ...

Еще в разделе: (Показать все результаты (>280) - www.stecf.org/ )

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

Еще в разделе: (Показать все результаты (>18772) - www.atnf.csiro.au/ )

• casacore: casa::MSObservationIndex Class Reference
• Casda Upload Utility CentralProcessor 0.11 documentation
• Pulsar Group Main/Psrfits

... Apache HTTP Server Version 2.2 . ... On systems with multiple users, each user can be permitted to have a web site in their home directory using the UserDir directive. Visitors to a URL http://example.com/~username/ will get content out of the home directory of the user " username ", out of the subdirectory specified by the UserDir directive. Per-user web directories . ... the URL http://example.com/~rbowen/file.html will be translated to the file path /home/rbowen/public_html/file.html . ...

Еще в разделе: (Показать все результаты (>3794) - www.sao.ru/ )

• List of Tables
• mod_example - Apache HTTP Server
• Loading the Telescope and Instrument Specifications

... Up: Iraf Packages . ... IRAF Group, NOAO 1 , PO Box 26732, Tucson, AZ 85726 . This paper describes a new IRAF spectroscopy exposure time calculator. ... SPTIME takes an input source spectrum, either a reference blackbody, power law, or a user spectrum, a background ``sky'', observing parameters such as exposure time, central wavelength, seeing, airmass, and moon phase, instrument parameters such as aperture sizes and detector binning, a description of the spectrograph, and desired output. ...

Еще в разделе: (Показать все результаты (>1995) - www.adass.org/ )

• Modern CCD Observations of Moving Celestial Objects: Algorithms and Software
• ADASS 2002 Conference Proceedings
• Software for Testing and Commissioning the GBT

This module illustrates many of the aspects of the Apache 1.2 API and, when used, demonstrates the manner in which module callbacks are triggered by the server. ... Source File: mod_example.c . ... The files in the src/modules/example directory under the Apache distribution directory tree are provided as an example to those that wish to write modules that use the Apache API. ... Example . ... Uncomment the "AddModule modules/example/mod_example" line near the bottom of the src/Configuration file. ...

Еще в разделе: (Показать все результаты (>115) - neptun.sai.msu.ru/ )

• Apache module mod_vhost_alias
• Mapping URLs to Filesystem Locations - Apache HTTP Server
• Apache module mod_auth_anon.c

... FileљStructure . ... After downloading all the catalogues, the paths to the various files should look like this: Installation Data Directory / stars / default / stars _0_0v0_1.cat Installation Data Directory / stars / default / stars _1_0v0_1.cat Installation Data Directory / stars / default / stars _2_0v0_1.cat Installation Data Directory / stars / ... In this case, all the files would be in the <Installation Data Directory>/stars/default directory. ...

Еще в разделе: (Показать все результаты (>1291) - astro.uni-altai.ru/ )

• Stellarium: Plugins
• Stellarium: /home/aw/devel/stellarium/trunk/doc/fileStructure.doxygen Source

... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...

Еще в разделе: (Показать все результаты (>2505) - www.meade.com/ )

• Meade Instruments Corp. - Meade Customer Support
• Meade Instruments - Telescopes, Solar Telescopes, Binoculars, Spotting Scopes

Next: File Manipulation Routines Up: File and Directory Manipulation Previous: File and Directory Manipulation . This basically involves calling appropriate functions. int chdir(char path) - changes directory to specified path string. ... NOTE: rindex() is a string handling function that returns a pointer to the last occurrence of character c in string s , or a NULL pointer if c does not occur in the string. ( index() is similar function but assigns a pointer to 1st occurrence.) ...

Еще в разделе: (Показать все результаты (>1689) - jet.sao.ru/ )

• File and Directory Manipulation
• Using UNIX System Calls and Library Functions
• File Access and Directory System Calls

Next: Observing the Old-Fashioned Way (Gui-Free Observations) Up: Spectral Line Appendices Previous: OLD Basic Analyz Routines For use with data taken BEFORE March 6, 2000 . This appendix contains example analyz sequences used to look at HI spectra. ... Additionally, if you have not run analyz before, instruction (2) should read: If you have not, instruction (3) should read: . ... 7) redln < rec < n : This first stores the individual ON/OFF - 1 data dumps into registers 100 - 100+ - 1. ...

Еще в разделе: (Показать все результаты (>6301) - www.naic.edu/ )

• The Arecibo User Manual for Astronomers
• Index of /~phil/hardware/pdev/fpga/gx/jfft/examples/pfb32
• Index of /~phil/hardware/pdev/fpga/gx/jfft/examples/galfa_w

This describes the exposure window used by each instrument (the graphical interface for the hub's expose command). ... To open the expose window for a given instrument, bring up that instrument's main window, then press the Expose... button along the bottom. ... The top panel shows the status of the current exposure sequence (regardless of who started it). ... File: the file name for the current exposure, or the most recent exposure if not exposing. ... Download: exposure download preferences. ...

Еще в разделе: (Показать все результаты (>683) - www.apo.nmsu.edu/ )

• Index of /arc35m/Instruments
• Index of /arc35m/Instruments/GIFS
• Index of /arc35m/Instruments/GIFS/websitev18

In this chapter we will consider two very simple but useful Web agents that I have written on Actor Prolog for my own needs. ... Let us start the Web agent. Fig. ... Start of the Web agent. The Context diagram consists of three blocks: "Logic Programming Sites", "Edit", and "Check". ... Some Web sites that are linked with the logic programming and Prolog are listed in the pulldown list (these addresses are transferred to the "Edit" block from the "Logic Programming Sites" block). ...

Еще в разделе: (Показать все результаты (>470) - www.cplire.ru/ )

• Actor Prolog. Example "D:\MOROZOV\Z\DEMO\EXE\EXAMPLES\SADT\JAM\JAM.A"
• Actor Prolog. Example "D:\MOROZOV\Z\DEMO\EXE\EXAMPLES\SADT\JAM-E\JAM-E.A"
• Actor Prolog. Example "D:\MOROZOV\Z\DEMO\EXE\EXAMPLES\SADT\JAM\JAM.DLG"

OptInt PmWiki : Pm Wiki / Initial Setup Tasks . ... Most PmWiki configuration is performed in files called local/config.php and pub/css/local.css . ... When you first install PmWiki, the local/config.php file does not exist. Copy the sample-config.php file (in the docs/ directory) to local/config.php and use it as a starting point. ... When changing the configuration of your site, always change the local/config.php file or add files to the cookbook/ or pub directories. ... Just make an text-file. ...

Еще в разделе: (Показать все результаты (>4351) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : Initial Setup Tasks
• Part II Computational Physics - Examples
• OptInt PmWiki : PmWiki / PmWiki Installation

.

Еще в разделе: (Показать все результаты (>32) - sputnik.infospace.ru/ )

The large magnetic cloud caused by coronal mass ejection at the Sun on January 6, 1997 came to the Earth at early morning on January 10 and continue to interact with Earth's magnetosphere till January 11 (see for example home page of this event prepeared by Dr. M.Peredo http://www-istp.gsfc.nasa.gov/istp/cloud_jan97/event.html ). ... During the days discussed here INTERBALL-1 satellite was in the magnetosphere (MS) near its dusk flunk - see the Fig. 1 for compearing. ...

Еще в разделе: (Показать все результаты (>1417) - www.cosmos.ru/ )

• Examples of the raw magnetic field information, obtained with the MIF-M
• IKI structure
• ASCII files description