... This loss depends on several parameters, in particular on the position where the photon was detected, its energy, the temperature of the CCD, and the saturation of traps by charges preceding along the readout direction. ... For deriving the CTI, each CCD column was split into macro pixels, which were determined by adaptive binning to contain a sufficient number of first singles around the line feature. ...

Еще в разделе: (Показать все результаты (>32780) - xmm.vilspa.esa.es/ )

• Parameters

... We now describe the input parameters to the self-calibration tasks. ... For selfcal , you need not perform source , dra , or ddec selection if you use the selradec option (see below). minants : The minimum number of antenna that must be present before the tasks will attempt to find a solution. ... and phase : This determines whether the self-calibration tasks solve for just phase ( options=phase , which is the default) or amplitude and phase solution ( options=amplitude ). mfs : . ...

Еще в разделе: (Показать все результаты (>8914) - www.atnf.csiro.au/ )

• ccalapply (Calibration Applicator) CentralProcessor 0.11 documentation
• ccontsubtract CentralProcessor 0.11 documentation
• Displaying Calibration Tables - GPPLT

... Computing the true count rates for digital data. ... The following equation is used to find the count rate. x = ( raw counts / sample time ) . ... True count rates for digital data are corrected by using the first equation for a point source and the second for an extended source. a = ( y - pre_amp - darkrate ) / ( highvolt x pt_effic ) . ... True photocurrents (count rates for analog data) are corrected by the first equation for point sources and the second equation for extended sources. ...

Еще в разделе: (Показать все результаты (>17607) - www.stsci.edu/ )

• CCD Parameters table
• Appendix: Recipe File XML Format GPI Data Pipeline 1.0 documentation
• HSP Data Handbook

Next: Parameters Up: How to use CONSTRICTOR Previous: NPOI raw data files Contents . The parameter file contains information for CONSTRICTOR on the location of the raw data files, start and stop times, integration time, etc. ... The parameter file, YYYY-MM-DD.par , can now be created using the rawlist procedure of . ... Check beginning and tail of the listing for each file. ... Next: Parameters Up: How to use CONSTRICTOR Previous: NPOI raw data files Contents Christian Hummel 2015-04-28 ...

Еще в разделе: (Показать все результаты (>50039) - www.eso.org/ )

• Stellar parameters from calibrations of spectral types
• The Hierarchical Stellar Systems Model Format
• CONSTRICTOR parameters for astrometric reductions

... Dark current e - /s/pix . ... OH continuum photon/s/m 2 /arcsec 2 / m . ... Imager: . ... Adaptive Optics: . ... Object signal e - /pix . Sky thermal signal e - /pix . Sky OH continuum signal e - /pix . Sky OH line signal e - /pix . Telescope thermal signal e - /pix . AOS thermal signal e - /pix . Cryostat signal e - /pix . Dark signal e - /pix . Total signal e - /pix . ... This tool models the performance of the Gemini South Adaptive Optics Imager (GSAOI) . ...

Еще в разделе: (Показать все результаты (>489) - www.mso.anu.edu.au/ )

• NIFS Performance Calculator
• Gemini Near-Infrared Integral-Field Spectrograph (NIFS) Spectrograph.
• GMTIFS IFS Performance Calculator

This page gives the name and meaning of the various parameters which can be queried in HyperLeda through SQL requests . ... real . ... actual error on t . ... log 10 of apparent major axis diameter d25 at 25 mag.arcsec -2 (d25 in 0.1') . ... actual error on logd25 . ... Apparent maximum rotation velocity of gas . ... log 10 of apparent corrected diameter (dc in 0.1') . ... total apparent corrected B-magnitude . ... total apparent corrected U-B color . ... Questions: leda@univ-lyon1.fr ...

Еще в разделе: (Показать все результаты (>2169) - www.sao.ru/ )

• BTA meteo parameters: temperature for the last day
• Edition of the Table Containing the Atomic Parameters
• HyperLEDA documentation: parameter: objtype

... The models provided are: . abs - absorption of x-rays by neutral gas with solar abundances. parameter 1 = . ... parameter 2 = . ... normalization - logarithmic value of the flux density at 1 keV in units of keV cm -2 s -1 keV -1 . ... normalization - logarithmic value of the normalization of the gaussian in units of keV cm -2 s -1 . ... absorption ( params )* model ( params ) . ... A single value for the normalization (i.e., fixed normalization) will force the program to use that value. ...

Еще в разделе: (Показать все результаты (>2452) - hea-www.harvard.edu/ )

• The AstroStat Slog nuisance parameter
• Parameters
• Editing Files and Parameters

... Guider functions . ... Guide Sensor Performance . ... Guide Sensor Sky Coverage/ Star Availability . Guide Star Selection Criteria . ... Guide fiber organization and reach at plug plate . ... Plug plate holes for guide stars are identical to those for science FO . ... FOV for each of 9 guide stars is 7.4 arcsec dia. (0.45 mm FO, Sumitomo IGN-05/10) . ... Selected guide stars must have no neighbor stars within TBD (5 arcsec) radius that have a brightness within TBD (5 mag.) of guide stars . ...

Еще в разделе: (Показать все результаты (>608) - www.apo.nmsu.edu/ )

• Echelle for Beginners
• TUI:Instruments:Agile:Agile window

... Using the uvby -photometry and proper motion data for about 5500 F stars within 80 pc from the Sun, we have studied velocity ellipsoid parameters and obtained the following results. 1) The sizw of all wllipsoid semiaxes increase systematically for groups of stars with the decrease of both temperature (at constant metallicity) and metallicity (at constant temperature). ... As a result, each of the three parameters - temperature, metallicity and velocity dispersion - is an age indicator. ...

Еще в разделе: (Показать все результаты (>50) - ip.rsu.ru/ )

Russian SHAREABLE DATA CENTER Institute of Solar-Terrestial Physics SB RAS . ... Here we present the ionospheric parameters variations for quiet conditions. ...

Еще в разделе: (Показать все результаты (>18) - rp.iszf.irk.ru/ )

• East Siberian Center for the Earth's Ionosphere Research. Modelling, secondary
• East Siberian Center for the Earth's Ionosphere Research. Capabilities and

... We demonstrate through numerical simulations that model parameters estimated with our technique are essentially bias-free, even when the average number of counts per bin is 1. ... The IW technique avoids such biases by estimating through successive iterations, where for each iteration, j, , and the best-fit parameters are determined by minimization of . ... In our sample, we find that the minimum values and best-fit parameters converge after about 6 iterations. ...

Еще в разделе: (Показать все результаты (>1734) - www.adass.org/ )

• QuickLook Data Reduction Pipeline - Keck Adaptive Optics Real Time Data
• A Python-based IRAF Task Parameter Editor
• In-Orbit Calibration of the Distortion of the SOHO/LASCO-C2 Coronagraph

... SFIT is a general-purpose code designed to optimize theoretical stellar spectra to an observed spectrum. ... While the programme expects input from "stdio", it is more natural to save commands in a file (eg "sfit_input") and run the code simply by . ... If the spectra to be fitted have a filename "star_spectrum", then the best fit spectrum will be written out, together with the renormalized input spectrum, to a file called "star_spectrum.fit". ... sets up model spectrum grid (and for 2nd star) . ...

Еще в разделе: (Показать все результаты (>1719) - star.arm.ac.uk/ )

• FFIT - Command Syntax
• SCL Sfit SLV Commands
• Sfit Control Language: Classified Listing

THE PARAMETERS INVOLVED IN HAPKE'S MODEL FOR ESTIMATION OF THE COMPOSITION OF THE EJECTA LUNAR TERRAINS. ... In the previous papers we were estimated the surface roughness of the ejecta lunar terrains by means comparison of the local phase function and the average integrated lunar indicatrix. ... The Hapke's theoretical model of the lunar surface reflection. ... For THE PARAMETERS INVOLVED IN HAPKE'S MODEL: S.G. Pugacheva, V.V. Shevchenko a low-albedo lunar surface parameter Bo = 1. ...

Еще в разделе: (Показать все результаты (>93) - selena.sai.msu.ru/ )

• http://selena.sai.msu.ru/Symposium/ir_luna_e.pdf
• http://selena.sai.msu.ru/Pug/Publications/m44_70_pugacheva.pdf
• http://selena.sai.msu.ru/Pug/Publications/ms38/ms080.pdf

Arecibo Upgrade Notes INSTRUMENTAL POLARIZATION : POLARIZATION ISOLATION ERRORS IN STOKES PARAMETERS Jim Cordes Joe Lazio 22 May 1996 Summary The purpose of this memo is to: 1 demonstrate how polarization isolation is related to errors in Stokes parameters ; 2 estimate a tolerable level of errors in Stokes parameters due to amplitude and ... There we had a level of cross coupling that gave about 10 errors in Stokes parameters. ...

Еще в разделе: (Показать все результаты (>2816) - www.naic.edu/ )

• ALFA Calibration Diode Temperature (Full Band)
• ALFA Receiver Temperature Polynomial Fit
• ALFA Performance

Next: Other parameters of the Up: The Model Previous: Initial binary parameters . As we only deal with initially massive binary systems (their primary's mass is higher than 10 ), which are capable of evolving off the main sequence during less than years, the compact stars left behind stellar evolution are (in the case of the most massive stars) NSs and BHs. ... For a NS belonging to a binary, the evolution complicates as the secondary star evolves: for example, (recycling), etc. ...

Еще в разделе: (Показать все результаты (>378) - xray.sai.msu.ru/ )

• Other parameters of the evolutionary scenario
• The Gravimagnetic Parameter
• Initial binary parameters

... Публикации и издания Публикации профессорско-преподавательского состава СГАУ Издания проф. Сосниной Т.Н. Biosphere: Analysis of Value Parameters . ... Besides, the ways of saving the use value and value properties of biosphere are analyzed. The expediency of transformation of two-criterion theory of value into the three- criterion theory of the balance of value, where the ecologic component performs the function of the key criterion has been founded. ... BIOSPHERE USE VALUE OF THE PRODUCT: MAIN . ...

Еще в разделе: (Показать все результаты (>309) - www.ssau.ru/ )

ALMA | ... Phase Correction Algorithms | ... On this page, we describe what the phase correction algorithms set out to do and the framework we have developed to optimally use all of the available information. ... We are developing a Bayesian framework to combine all the information we have about the current and future meterological conditions (which are naturally accommodated as priors in a Bayesian scheme) with detailed physical models of the atmosphere. ...

Еще в разделе: (Показать все результаты (>1345) - www.mrao.cam.ac.uk/ )

• Astrophysics Group CosmoNet
• Simple logging of scripts and their parameters Bojan Nikolic web pages (r. 329)
• Command line interface to libAIR and water vapour column retrieval Bojan

. Our introductory notes briefly describes the primary parameters of real scatterers, their basic models and methods of realization of the models. As an example, the models used in astronomy are overviewed. Our table after its completement will show a list of the most popular scatterer models and their parameters (under construction). To the top . Created by V.I. Last modified: 06/03/03, V.I.

Еще в разделе: (Показать все результаты (>236) - www.astro.spbu.ru/ )

• AI SPbU library of scattering codes
• Database of Optical Properties -- Level: subsubpage

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

Еще в разделе: (Показать все результаты (>7632) - www.arcetri.astro.it/ )

• Kernel tunable parameters
• Where are the tunable parameters of the kernel?
• Tunable Kernel Parameters?

In this chapter we will consider an example of visual expert system written on the Actor Prolog language. ... There are a lot of methods of oil field bed stimulation that increase output of the oil production: thermal, physical-chemical, gas, microbiological, and others. ... Fig. ... The Top-Most diagram consists of three blocks: the "Describe parameters of hydrocarbon field" block, the "Check adaptability of existed methods of oil production" block, and the "Display solution" block. ... Gas methods. ...

Еще в разделе: (Показать все результаты (>507) - www.cplire.ru/ )

• Project 6 - RFBR - Multilayer epitaxial heterostructures of high-temperature
• Project 4 - RFBR - Stepantsov, Determination of the space anisotropy of order
• SYNCHRONIZATION OF DRIVE-RESPONSE SYSTEMS ON CONDITION OF A LARGE MISMATCH OF