... Spectrum extraction is turned on via the parameter withspectrumset , and the name of the output file is set with the parameter spectrumset . A spectrum, as defined here, is an OGIP compliant FITS file, made by histogramming the energy column of an input table. The energy column must be integer-valued, and any specified binning factor or energy ranges must be integer-valued as well. ... All range and binning parameters are in the units of the column from which the data is being extracted. ...

Tasks in GIPSY are the application programs which do useful work for the user. ... To start a task without parameters, only the name of the task needs to be supplied. taskname To specify parameters, any number of keyword-value pairs separated by blanks can be added to the taskname: taskname keyword1 = value1 keyword2 = value2 .. ... The user can set a parameter in the task context to change requests for hidden keywords into requests for defaulted keywords. ... Tasks all run in a context . ...

... Chapter 12: Near Infrared Camera and Multi-Object Spectrometer(NICMOS) > 12.2 Mode = ACCUMConfig = NIC1 or NIC2 or NIC3 . 12.2 Mode = ACCUM . Config = NIC1 or NIC2 or NIC3 . ... 12.2.6 Time Per Exposure . ... ACCUM is the simplest readout mode available on NICMOS. ... NREAD . ... Exposure times in ACCUM Mode are quantized. ... Exposure Time (seconds) . ... In other words, do not specify an exposure time shorter than 0.598 sec, which is the fastest ACCUM read time for NREAD =1. ...

... Apache HTTP Server Version 2.4 . ... Session encryption support . ... session_crypto_module . ... The session will be encrypted with the given key. Different servers can be configured to share sessions by ensuring the same encryption key is used on each server. ... The SessionCryptoPassphrase directive specifies the keys to be used to enable symmetrical encryption on the contents of the session before writing the session, or decrypting the contents of the session after reading the session. ...

... This section will deal with obtaining photons within specified regions of an image. Available regions are: Annulus Box Circle Ellipse Field -- entire field Irregular region based on intensity of map... i.e. region defined by contour levels. ... The imcnts task in the xray-spatial package sums the source and background counts in specified regions, and subtracts one from the other properly normalized. ... imcnts* - Find counts in an extended region, after removing an embedded point source . ...

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

OptInt PmWiki : Pm Wiki / Available Actions . Default actions . ... Cookbook actions . Page actions are applied to wiki pages, as a query string appended to the URL . ... displays dialog for setting/changing password of the specified page or group of pages, see passwords , see also $EnablePostAttrClearSession if you do not want to have the session cleared after validating change General use of passwords . ... display the specified page (default action if no ?action= is present) . ...

... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Modules . ... mod_ext_filter presents a simple and familiar programming model for filters . ... any programming/scripting language can be used, provided that it allows the program to read from standard input and write to standard output . existing programs can be used unmodified as Apache filters . ... mod_ext_filter directive to define a filter . ... program /usr/bin/enscript, with the type of . ...

All spectral line observing modes got a parameter to specify how the data taking should be done with the introduction of CIMA version 3.0 (2.3). In CIMA 3.0, the parameter is called either 'Loops per file' or 'Strips per file' depending on the observing mode. ... One new feature introduced with CIMA version 3.1 is the possibility to select between scan-based and continuous data taking when using the WAPPs and/or the Mock spectrometer for spectral line observing modes. ... Continuous data taking . ...

Next: A New IRAF Catalog Access Tool for Astrometry . Up: Iraf Packages . ... Twofitlines is a tool developed within IRAF, optimized to be used with data containing multiple spectra along the spatial axis of the detector. A given spectral feature can be decomposed in one or several Gaussian components. ... A given spectral feature can be modeled using one or more components (currently only Gaussian profiles are available), . ... Close spectral features could be modeled simultaneously. ...

... Driver ID: LOCAL . This is a hack to allow a machine to use its own system clock as a reference clock, i.e., to free-run using no outside clock discipline source. ... Another application for this driver is if a particular server clock is to be used as the clock of last resort when all other normal synchronization sources have gone away. ... This driver provides a mechanism to trim the local clock in both time and frequency, as well as a way to manipulate the leap bits. ... Not used by this driver. ...

lte-codes . Sterne . ... In 2006, Behara and Jeffery introduced a new file format for the model atmospheres produced by STERNE and used by SPECTRUM and SFIT. ... allow depth-dependent descriptions of composition, and . ... model.lambda_ref <lambda ref > . ... abundance < elem > < abund > . ... structure.abundance < elem > : ( needs N depth ) . ab elem,1 , ab elem,2 , ..., ab elem,Ndepth > . ... structure.tau_ref : ( needs N depth ) . ... structure.opac_ref : ( needs N depth ) . ...

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

asncombine -- Process and combine images in one or two NICMOS associations asncombine association . ... set to yes to include error planes in co-added images error. background . ... This is useful to use different background subtractions for different images. fheader . set to yes in order to multiply the background by the value of keyword "factor" in the image header. ... Set to yes to use quadrants statistics save in the image header from previous runs of asncombine. regquad1 . ...

... SphereParams Struct Reference . ... SphereParams (const float radius) . ... Definition at line 50 of file StelGeometryBuilder.hpp . ... Definition at line 103 of file StelGeometryBuilder.hpp . ... Definition at line 120 of file StelGeometryBuilder.hpp . ... Definition at line 112 of file StelGeometryBuilder.hpp . ... Definition at line 118 of file StelGeometryBuilder.hpp . ... Definition at line 110 of file StelGeometryBuilder.hpp . ... Definition at line 114 of file StelGeometryBuilder.hpp . ...

... The various Inst :Focus scripts allow you to take a series of exposures over a range of secondary mirror focus values, report the resulting FWHMs and optionally adjust the focus to the estimated best value. ... Slitviewer scripts assume the focus star is on the boresight. ... Focus scripts runs in three phases: . ... The script moves the boresight so the focus star is visible next to the slit, sets the focus to Center Focus, takes an exposure and tries to measure the star's FWHM. ...

AUTOMATIC STATION OF ECOLOGICAL CONTROL . ... STATE OF ASEC DEVELOPMENT . ... ASEC . ... Warranted life-time of balloons and calibration mixed gases, months . ... Telemetry system supplying information from each station to ecological center on technical state of gas analyzing equipment and instruments, emergency situations and unauthorized opening of the station. available . ... Calibration mixed gasses are stored inside the balloons as part of ASEC. ... Official WEB-site of S.P.Korolev RSC Energia . ...

... Source File: mod_negotiation.c . Module Identifier: negotiation_module Content negotiation, or more accurately content selection, is the selection of the document that best matches the clients capabilities, from one of several available documents. ... A type map (a file with the handler type-map ) which explicitly lists the files containing the variants. ... Apache only recognizes encodings that are defined by an AddEncoding directive. ... Content-Language: . ... Module: mod_negotiation . ...

... There are a lot of computer codes simulating this scattering and freely available in the Internet (see e.g. links on our JPDOC page ). ... The code and input file are available in the directory . ... A slightly modified code of Barber Hill with a C-shell and input files is available in the directory . ... The code, input and test output files are available in the directory . ... See also readme file. file. ... The code, input file and their description (a TeX file) are available in the directory . ...

. Intervals of available data are coded by blue color. To read availability charts user should know the descriptor ("name") of the KP subset of interest. Table annotations include also number of version for each subset. Plot resolution is exactly one pixel per hour. Data are considered as available if at least one data point is present during that hour.